Hi Ohad, On Tue, Nov 30, 2010 at 10:59 PM, Ohad Ben-Cohen <ohad@xxxxxxxxxx> wrote: > Make sure you have CONFIG_REGULATOR_FIXED_VOLTAGE enabled, and please > send us a full terminal log from boot to first error after applying > the following patch: The regulator is only enabled once. Equally, the MMC interface is initialised only at boot, and remains untouched afterwards. It's config doesn't change: clock: 25000000 Hz vdd: 7 (1.65 - 1.95 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 2 (4 bits) timing spec: 0 (legacy) Full kernel log (rather large): http://130.89.163.61/dmesg What concerns me is the regulator config - most boards seem to call the fixed regulator vmmc, but I require VSIM as well to power the card (which requires it to be labeled vmmc for the mmc subsystem?). Joerie -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
