I resend the patch as the one before did not rech the kernel-janitors list.
This patch removes all the ENABLE_DOT11D ifdefs.
It is always defined for this driver.
DOT11D has to do with regulatory domains.
What prompted this patch was a warning message in Sparse:
drivers/staging/rtl8192u/r8192U_core.c:247:1: warning: "eqMacAddr"
redefined in file included from drivers/staging/rtl8192u/:81:81:
drivers/staging/rtl8192u/dot11d.h:35:1: warning: this is the location
of the previous definition
Now there are no idefs around dot11d.h,it made no sense to have this second definition, so I removed that macro as well. ( Thanks Dan ;-) ).
Signed-off-by: David chosrova <david.chosrova@xxxxxxxxxxxxxx>
Acked-by: Dan Carpenter <error27@xxxxxxxxx>
---
diff --git a/drivers/staging/rtl8192u/Makefile b/drivers/staging/rtl8192u/Makefile
index 206d924..eefc657 100644
--- a/drivers/staging/rtl8192u/Makefile
+++ b/drivers/staging/rtl8192u/Makefile
@@ -9,7 +9,6 @@ ccflags-y += -DTHOMAS_BEACON -DTHOMAS_TASKLET -DTHOMAS_SKB -DTHOMAS_TURBO
#ccflags-y += -DUSB_TX_DRIVER_AGGREGATION_ENABLE
#ccflags-y += -DUSB_RX_AGGREGATION_SUPPORT
ccflags-y += -DUSE_ONE_PIPE
-ccflags-y += -DENABLE_DOT11D
ccflags-y += -Idrivers/staging/rtl8192u/ieee80211
r8192u_usb-y := r8192U_core.o r8180_93cx6.o r8192U_wx.o \
diff --git a/drivers/staging/rtl8192u/dot11d.h b/drivers/staging/rtl8192u/dot11d.h
index d99cc03..92e7a00 100644
--- a/drivers/staging/rtl8192u/dot11d.h
+++ b/drivers/staging/rtl8192u/dot11d.h
@@ -1,7 +1,6 @@
#ifndef __INC_DOT11D_H
#define __INC_DOT11D_H
-#ifdef ENABLE_DOT11D
#include "ieee80211/ieee80211.h"
@@ -98,5 +97,4 @@ int ToLegalChannel(
struct ieee80211_device *dev,
u8 channel
);
-#endif /* ENABLE_DOT11D */
#endif /* #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.c b/drivers/staging/rtl8192u/ieee80211/dot11d.c
index b91cbfc..ce63fc3 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.c
@@ -1,4 +1,3 @@
-#ifdef ENABLE_DOT11D
//-----------------------------------------------------------------------------
// File:
// Dot11d.c
@@ -220,4 +219,3 @@ EXPORT_SYMBOL(DOT11D_ScanComplete);
EXPORT_SYMBOL(IsLegalChannel);
EXPORT_SYMBOL(ToLegalChannel);
-#endif
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.h b/drivers/staging/rtl8192u/ieee80211/dot11d.h
index 15b7a4b..029c2ca 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.h
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.h
@@ -1,7 +1,6 @@
#ifndef __INC_DOT11D_H
#define __INC_DOT11D_H
-#ifdef ENABLE_DOT11D
#include "ieee80211.h"
//#define ENABLE_DOT11D
@@ -98,5 +97,4 @@ int ToLegalChannel(
struct ieee80211_device * dev,
u8 channel
);
-#endif //ENABLE_DOT11D
#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index e1216b7..c0b844d 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1572,10 +1572,8 @@ struct ieee80211_network {
#ifdef THOMAS_TURBO
u8 Turbo_Enable;//enable turbo mode, added by thomas
#endif
-#ifdef ENABLE_DOT11D
u16 CountryIeLen;
u8 CountryIeBuf[MAX_IE_LEN];
-#endif
// HT Related, by amy, 2008.04.29
BSS_HT bssht;
// Add to handle broadcom AP management frame CCK rate.
@@ -1769,7 +1767,6 @@ typedef u32 RT_RF_CHANGE_SOURCE;
#define RF_CHANGE_BY_IPS BIT28
#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
-#ifdef ENABLE_DOT11D
typedef enum
{
COUNTRY_CODE_FCC = 0,
@@ -1784,7 +1781,6 @@ typedef enum
COUNTRY_CODE_MIC,
COUNTRY_CODE_GLOBAL_DOMAIN
}country_code_type_t;
-#endif
#define RT_MAX_LD_SLOT_NUM 10
typedef struct _RT_LINK_DETECT_T{
@@ -1970,12 +1966,8 @@ struct ieee80211_device {
/* map of allowed channels. 0 is dummy */
// FIXME: remeber to default to a basic channel plan depending of the PHY type
-#ifdef ENABLE_DOT11D
void* pDot11dInfo;
bool bGlobalDomain;
-#else
- int channel_map[MAX_CHANNEL_NUMBER+1];
-#endif
int rate; /* current rate */
int basic_rate;
//FIXME: pleace callback, see if redundant with softmac_features
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index c8ca9d8..b34dc52 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -43,10 +43,7 @@
#include <asm/uaccess.h>
#include <linux/ctype.h>
-#include "ieee80211.h"
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats)
@@ -1599,7 +1596,6 @@ static const char *get_info_element_string(u16 id)
}
#endif
-#ifdef ENABLE_DOT11D
static inline void ieee80211_extract_country_ie(
struct ieee80211_device *ieee,
struct ieee80211_info_element *info_element,
@@ -1632,7 +1628,6 @@ static inline void ieee80211_extract_country_ie(
}
}
-#endif
int ieee80211_parse_info_param(struct ieee80211_device *ieee,
struct ieee80211_info_element *info_element,
@@ -2086,14 +2081,12 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
"QoS Error need to parse QOS_PARAMETER IE\n");
break;
-#ifdef ENABLE_DOT11D
case MFIE_TYPE_COUNTRY:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
info_element->len);
//printk("=====>Receive <%s> Country IE\n",network->ssid);
ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);//addr2 is same as addr3 when from an AP
break;
-#endif
/* TODO */
default:
IEEE80211_DEBUG_MGMT
@@ -2229,10 +2222,8 @@ static inline int ieee80211_network_init(
#ifdef THOMAS_TURBO
network->Turbo_Enable = 0;
#endif
-#ifdef ENABLE_DOT11D
network->CountryIeLen = 0;
memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-#endif
//Initialize HT parameters
//ieee80211_ht_initialize(&network->bssht);
HTInitializeBssDesc(&network->bssht);
@@ -2399,10 +2390,8 @@ static inline void update_network(struct ieee80211_network *dst,
dst->Turbo_Enable = src->Turbo_Enable;
#endif
-#ifdef ENABLE_DOT11D
dst->CountryIeLen = src->CountryIeLen;
memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-#endif
//added by amy for LEAP
dst->bWithAironetIE = src->bWithAironetIE;
@@ -2470,7 +2459,6 @@ static inline void ieee80211_process_probe_response(
return;
}
-#ifdef ENABLE_DOT11D
// For Asus EeePc request,
// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
// wireless adapter should follow the country code.
@@ -2527,7 +2515,6 @@ static inline void ieee80211_process_probe_response(
}
}
}
-#endif
/* The network parsed correctly -- so now we scan our known networks
* to see if we can find it in our list.
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index bc8c425..1285888 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -21,9 +21,7 @@
#include <linux/slab.h>
#include <linux/version.h>
#include <asm/uaccess.h>
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
u8 rsn_authen_cipher_suite[16][4] = {
{0x00,0x0F,0xAC,0x00}, //Use group key, //Reserved
@@ -430,10 +428,8 @@ void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
{
short ch = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
down(&ieee->scan_sem);
while(1)
@@ -443,11 +439,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
ch++;
if (ch > MAX_CHANNEL_NUMBER)
goto out; /* scan completed */
-#ifdef ENABLE_DOT11D
}while(!channel_map[ch]);
-#else
- }while(!ieee->channel_map[ch]);
-#endif
/* this function can be called in two situations
* 1- We have switched to ad-hoc mode and we are
@@ -471,9 +463,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
if (ieee->state == IEEE80211_LINKED)
goto out;
ieee->set_chan(ieee->dev, ch);
-#ifdef ENABLE_DOT11D
if(channel_map[ch] == 1)
-#endif
ieee80211_send_probe_requests(ieee);
/* this prevent excessive time wait when we
@@ -496,10 +486,8 @@ out:
}
else{
ieee->sync_scan_hurryup = 0;
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
up(&ieee->scan_sem);
}
}
@@ -510,10 +498,8 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
static short watchdog = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
if(!ieee->ieee_up)
return;
down(&ieee->scan_sem);
@@ -523,25 +509,15 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
if (watchdog++ > MAX_CHANNEL_NUMBER)
{
//if current channel is not in channel map, set to default channel.
- #ifdef ENABLE_DOT11D
if (!channel_map[ieee->current_network.channel]);
- #else
- if (!ieee->channel_map[ieee->current_network.channel]);
- #endif
ieee->current_network.channel = 6;
goto out; /* no good chans */
}
-#ifdef ENABLE_DOT11D
}while(!channel_map[ieee->current_network.channel]);
-#else
- }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
if (ieee->scanning == 0 )
goto out;
ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#ifdef ENABLE_DOT11D
if(channel_map[ieee->current_network.channel] == 1)
-#endif
ieee80211_send_probe_requests(ieee);
@@ -550,10 +526,8 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
up(&ieee->scan_sem);
return;
out:
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
ieee->actscanning = false;
watchdog = 0;
ieee->scanning = 0;
@@ -635,7 +609,6 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee)
/* called with ieee->lock held */
void ieee80211_start_scan(struct ieee80211_device *ieee)
{
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee) )
{
if(IS_COUNTRY_IE_VALID(ieee))
@@ -643,7 +616,6 @@ void ieee80211_start_scan(struct ieee80211_device *ieee)
RESET_CIE_WATCHDOG(ieee);
}
}
-#endif
if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
if (ieee->scanning == 0){
ieee->scanning = 1;
@@ -657,7 +629,6 @@ void ieee80211_start_scan(struct ieee80211_device *ieee)
/* called with wx_sem held */
void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
{
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee) )
{
if(IS_COUNTRY_IE_VALID(ieee))
@@ -665,7 +636,6 @@ void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
RESET_CIE_WATCHDOG(ieee);
}
}
-#endif
ieee->sync_scan_hurryup = 0;
if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
ieee80211_softmac_scan_syncro(ieee);
@@ -2390,11 +2360,9 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
ieee80211_softmac_check_all_nets(ieee);
-#ifdef ENABLE_DOT11D //if creating an ad-hoc, set its channel to 10 temporarily--this is the requirement for ASUS, not 11D, so disable 11d.
// if((IS_DOT11D_ENABLE(ieee)) && (ieee->state == IEEE80211_NOLINK))
if (ieee->state == IEEE80211_NOLINK)
ieee->current_network.channel = 6;
-#endif
/* if not then the state is not linked. Maybe the user swithced to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
@@ -2483,7 +2451,6 @@ inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
void ieee80211_start_bss(struct ieee80211_device *ieee)
{
unsigned long flags;
-#ifdef ENABLE_DOT11D
//
// Ref: 802.11d 11.1.3.3
// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
@@ -2495,7 +2462,6 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)
return;
}
}
-#endif
/* check if we have already found the net we
* are interested in (if any).
* if not (we are disassociated and we are not
@@ -2530,10 +2496,8 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)
if (ieee->data_hard_stop)
ieee->data_hard_stop(ieee->dev);
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
Dot11d_Reset(ieee);
-#endif
ieee->state = IEEE80211_NOLINK;
ieee->is_set_key = false;
ieee->link_change(ieee->dev);
@@ -2669,11 +2633,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
ch++;
if (ch > MAX_CHANNEL_NUMBER)
return; /* no channel found */
-#ifdef ENABLE_DOT11D
}while(!GET_DOT11D_INFO(ieee)->channel_map[ch]);
-#else
- }while(!ieee->channel_map[ch]);
-#endif
ieee->current_network.channel = ch;
}
@@ -2721,11 +2681,9 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
for(i = 0; i < 5; i++) {
ieee->seq_ctrl[i] = 0;
}
-#ifdef ENABLE_DOT11D
ieee->pDot11dInfo = kzalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
if (!ieee->pDot11dInfo)
IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for DOT11D\n");
-#endif
//added for AP roaming
ieee->LinkDetectInfo.SlotNum = 2;
ieee->LinkDetectInfo.NumRecvBcnInPeriod=0;
@@ -2796,13 +2754,11 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
void ieee80211_softmac_free(struct ieee80211_device *ieee)
{
down(&ieee->wx_sem);
-#ifdef ENABLE_DOT11D
if(NULL != ieee->pDot11dInfo)
{
kfree(ieee->pDot11dInfo);
ieee->pDot11dInfo = NULL;
}
-#endif
del_timer_sync(&ieee->associate_timer);
cancel_delayed_work(&ieee->associate_retry_wq);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
index f335c25..cb5a3c3 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
@@ -15,9 +15,7 @@
#include "ieee80211.h"
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
/* FIXME: add A freqs */
const long ieee80211_wlan_frequencies[] = {
@@ -63,12 +61,10 @@ int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info
}else { /* Set the channel */
-#ifdef ENABLE_DOT11D
if (!(GET_DOT11D_INFO(ieee)->channel_map)[fwrq->m]) {
ret = -EINVAL;
goto out;
}
-#endif
ieee->current_network.channel = fwrq->m;
ieee->set_chan(ieee->dev, ieee->current_network.channel);
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 494f180..0bdeacf 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -77,9 +77,7 @@ double __extendsfdf2(float a) {return a;}
#include "r8192_pm.h"
#endif
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
//set here to open your trace code. //WB
u32 rt_global_debug_component = \
// COMP_INIT |
@@ -166,7 +164,6 @@ static struct usb_driver rtl8192_usb_driver = {
#endif
};
-#ifdef ENABLE_DOT11D
typedef struct _CHANNEL_LIST
{
@@ -242,9 +239,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
}
return;
}
-#endif
-#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
#define rx_hal_is_cck_rate(_pdrvinfo)\
(_pdrvinfo->RxRate == DESC90_RATE1M ||\
@@ -3155,7 +3150,6 @@ static void rtl8192_read_eeprom_info(struct net_device* dev)
short rtl8192_get_channel_map(struct net_device * dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef ENABLE_DOT11D
if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
printk("rtl8180_init:Error channel plan! Set to default.\n");
priv->ChannelPlan= 0;
@@ -3163,21 +3157,6 @@ short rtl8192_get_channel_map(struct net_device * dev)
RT_TRACE(COMP_INIT, "Channel plan is %d\n",priv->ChannelPlan);
rtl819x_set_channel_map(priv->ChannelPlan, priv);
-#else
- int ch,i;
- //Set Default Channel Plan
- if(!channels){
- DMESG("No channels, aborting");
- return -1;
- }
- ch=channels;
- priv->ChannelPlan= 0;//hikaru
- // set channels 1..14 allowed in given locale
- for (i=1; i<=14; i++) {
- (priv->ieee80211->channel_map)[i] = (u8)(ch & 0x01);
- ch >>= 1;
- }
-#endif
return 0;
}
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 25d5c87..f6408f9 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -21,9 +21,7 @@
#include "r8192U.h"
#include "r8192U_hw.h"
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
#define RATE_COUNT 12
u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
@@ -458,11 +456,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
for (i = 0, val = 0; i < 14; i++) {
// Include only legal frequencies for some countries
-#ifdef ENABLE_DOT11D
if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
-#else
- if ((priv->ieee80211->channel_map)[i+1]) {
-#endif
range->freq[val].i = i + 1;
range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
range->freq[val].e = 1;
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index a3adaed..ac84ff7 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -6,9 +6,7 @@
#include "r8192U_dm.h"
#include "r819xU_firmware_img.h"
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
0,
0x085c, //2412 1
@@ -1257,13 +1255,11 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel);
// RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel));
-#ifdef ENABLE_DOT11D
if (!IsLegalChannel(priv->ieee80211, channel))
{
RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
}
-#endif
//FIXME:need to check whether channel is legal or not here.WB
diff --git a/drivers/staging/rtl8192u/ieee80211/Makefile b/drivers/staging/rtl8192u/ieee80211/Makefile
index 45704f8..0775c55 100644
--- a/drivers/staging/rtl8192u/ieee80211/Makefile
+++ b/drivers/staging/rtl8192u/ieee80211/Makefile
@@ -20,7 +20,6 @@ ifeq ($(NIC_SELECT),RTL8192U)
endif
#ccflags-y := -DJOHN_NOCPY
#flags to enable or disble 80211D feature
-ccflags-y += -DENABLE_DOT11D
ieee80211-rsl-objs := ieee80211_rx.o \
ieee80211_softmac.o \
ieee80211_tx.o \
@@ -75,7 +74,6 @@ CFLAGS += -I$(KSRC)/include -I.
CFLAGS += -DMODVERSIONS -DEXPORT_SYMTAB -include $(KSRC)/include/linux/modversions.h
#Kernel 2.4.20
#CFLAGS += -D__NO_VERSION__ -DEXPORT_SYMTAB
-#CFLAGS += -DENABLE_DOT11D
SMP := $(shell $(CC) $(MODCFLAGS) -E -dM $(CONFIG_FILE) | \
grep CONFIG_SMP | awk '{print $$3}')
ifneq ($(SMP),1)
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.h b/drivers/staging/rtl8192u/ieee80211/dot11d.h
index 029c2ca..54f2b4c 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.h
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.h
@@ -3,7 +3,6 @@
#include "ieee80211.h"
-//#define ENABLE_DOT11D
//#define DOT11D_MAX_CHNL_NUM 83
On Mon, Nov 29, 2010 at 12:19:55AM +0300, Dan Carpenter wrote:
> On Sat, Nov 27, 2010 at 11:37:48PM +0100, David Chosrova wrote:
> > Hello,
> >
> > In this patch I have removed the #ifdef ENABLE_DOT11D.
> >
>
> Cool man. Looks good.
>
> There are several places where ENABLE_DOT11D is still there in the
> comments. Can do a: grep ENABLE_DOT11D drivers/staging/rtl8192u/ -R
> and remove all those?
>
> Then add an:
> Acked-by: Dan Carpenter <error27@xxxxxxxxx>
>
> When people apply patches they try to automate the process. They
> have scripts that automatically take an email and creates a kernel
> patch. So choose a good subject and write a patch description.
> I would normally write this:
>
> Subject: [patch] Staging: rtl8192u: remove dead code to disable dot11d
>
> This patch removes all the ENABLE_DOT11D ifdefs. It's always enabled
> for this driver. DOT11D has to do with regulatory domains.
>
> What prompted this patch was a warning message in Sparse:
>
> drivers/staging/rtl8192u/r8192U_core.c:247:1: warning: "eqMacAddr"
> redefined in file included from drivers/staging/rtl8192u/:81:81:
> drivers/staging/rtl8192u/dot11d.h:35:1: warning: this is the location
> of the previous definition
>
> Now there are no ifdefs around dot11d.h it made no sense to have this
> second definition, so I removed that macro as well.
>
> ---
> Edit that however you want. That's just an idea.
>
> Don't put the "Hello etc" into the message because Greg will have to
> strip those bits out of the patch description by hand.
>
> After the Signed-off-by: line put three dashes "---". Things below that
> line get stripped out of the patch description. That's where you can
> put the "Compile tested." or "Feedback requested" stuff if you want.
>
> Send your email to: gregkh@xxxxxxx
> CC these addresses: devel@xxxxxxxxxxxxxxxxxxxx, error27@xxxxxxxxx,
> andreamrl@xxxxxxxxxx, linux-wireless@xxxxxxxxxxxxxxx,
> kernel-janitors@xxxxxxxxxxxxxxx
>
> regards,
> dan carpenter
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
