* A diff between rfbuffer settings of turbo and non-turbo
modes indicates there is a bit on bank 2 related to turbo operation
(it's set on turbo modes). This bit is present on all radios except
RF5413 that seems to have a completely different bank 2. Also
since 2317 has the same rf-registers locations with 2425 and
since the bit exists on 2317 I assume it also exists on 2425/2417).
So in case we use turbo mode (40MHz) enable it on bank modification.
Signed-off-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
---
drivers/net/wireless/ath/ath5k/phy.c | 5 +++++
drivers/net/wireless/ath/ath5k/rfbuffer.h | 27 ++++++++++++++++++++++++---
2 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 61d3800..df5cd0f 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -824,6 +824,11 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
g_step = &go->go_step[ah->ah_gain.g_step_idx];
+ /* Set turbo mode (N/A on RF5413) */
+ if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
+ (ah->ah_radio != AR5K_RF5413))
+ ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_TURBO, false);
+
/* Bank Modifications (chip-specific) */
if (ah->ah_radio == AR5K_RF5111) {
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index 70356ba..16b67e8 100644
--- a/drivers/net/wireless/ath/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -79,8 +79,10 @@ struct ath5k_rf_reg {
* life easier by using an index for each register
* instead of a full rfb_field */
enum ath5k_rf_regs_idx {
+ /* BANK 2 */
+ AR5K_RF_TURBO = 0,
/* BANK 6 */
- AR5K_RF_OB_2GHZ = 0,
+ AR5K_RF_OB_2GHZ,
AR5K_RF_OB_5GHZ,
AR5K_RF_DB_2GHZ,
AR5K_RF_DB_5GHZ,
@@ -134,6 +136,9 @@ enum ath5k_rf_regs_idx {
* RF5111 (Sombrero) *
\*******************/
+/* BANK 2 len pos col */
+#define AR5K_RF5111_RF_TURBO { 1, 3, 0 }
+
/* BANK 6 len pos col */
#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 }
#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 }
@@ -158,6 +163,7 @@ enum ath5k_rf_regs_idx {
#define AR5K_RF5111_MAX_TIME { 2, 49, 0 }
static const struct ath5k_rf_reg rf_regs_5111[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5111_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ},
@@ -231,6 +237,9 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = {
* RF5112/RF2112 (Derby) *
\***********************/
+/* BANK 2 (Common) len pos col */
+#define AR5K_RF5112X_RF_TURBO { 1, 1, 2 }
+
/* BANK 7 (Common) len pos col */
#define AR5K_RF5112X_GAIN_I { 6, 14, 0 }
#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 }
@@ -262,6 +271,7 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = {
#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 }
static const struct ath5k_rf_reg rf_regs_5112[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ},
@@ -378,6 +388,7 @@ static const struct ath5k_ini_rfbuffer rfb_5112[] = {
#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 }
static const struct ath5k_rf_reg rf_regs_5112a[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ},
@@ -481,11 +492,15 @@ static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
* RF2413 (Griffin) *
\******************/
+/* BANK 2 len pos col */
+#define AR5K_RF2413_RF_TURBO { 1, 1, 2 }
+
/* BANK 6 len pos col */
#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 }
#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 }
static const struct ath5k_rf_reg rf_regs_2413[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2413_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ},
};
@@ -536,11 +551,15 @@ static const struct ath5k_ini_rfbuffer rfb_2413[] = {
* RF2315/RF2316 (Cobra SoC) *
\***************************/
+/* BANK 2 len pos col */
+#define AR5K_RF2316_RF_TURBO { 1, 1, 2 }
+
/* BANK 6 len pos col */
#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 }
#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 }
static const struct ath5k_rf_reg rf_regs_2316[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2316_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ},
};
@@ -665,17 +684,20 @@ static const struct ath5k_ini_rfbuffer rfb_5413[] = {
* AR2317 (Spider SoC) *
\***************************/
+/* BANK 2 len pos col */
+#define AR5K_RF2425_RF_TURBO { 1, 1, 2 }
+
/* BANK 6 len pos col */
#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 }
#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 }
static const struct ath5k_rf_reg rf_regs_2425[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2425_RF_TURBO},
{6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ},
};
/* Default mode specific settings
- * XXX: a/aTurbo ?
*/
static const struct ath5k_ini_rfbuffer rfb_2425[] = {
/* BANK / C.R. A/XR B G */
@@ -764,7 +786,6 @@ static const struct ath5k_ini_rfbuffer rfb_2317[] = {
/*
* TODO: Handle the few differences with swan during
* bank modification and get rid of this
- * XXX: a/aTurbo ?
*/
static const struct ath5k_ini_rfbuffer rfb_2417[] = {
/* BANK / C.R. A/XR B G */
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
