* Handle all usec parameters in one function. It's much cleaner
this way.
Signed-off-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 26 +++++--
drivers/net/wireless/ath/ath5k/phy.c | 1 -
drivers/net/wireless/ath/ath5k/qcu.c | 4 -
drivers/net/wireless/ath/ath5k/reset.c | 130 ++++++++++++++++++++++++++++----
4 files changed, 134 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index b1429da..c953544 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -242,14 +242,6 @@
#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
#define AR5K_INIT_TX_RETRY 10
-#define AR5K_INIT_TRANSMIT_LATENCY ( \
- (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
- (AR5K_INIT_USEC) \
-)
-#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
- (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
- (AR5K_INIT_USEC_TURBO) \
-)
#define AR5K_INIT_PROTO_TIME_CNTRL ( \
(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
(AR5K_INIT_PROG_IFS) \
@@ -259,6 +251,24 @@
(AR5K_INIT_PROG_IFS_TURBO) \
)
+/* Rx latency for 5 and 10MHz operation (max ?) */
+#define AR5K_INIT_RX_LAT_MAX 63
+/* Tx latencies from initvals (5212 only but no problem
+ * because we only tweak them on 5212) */
+#define AR5K_INIT_TX_LAT_A 54
+#define AR5K_INIT_TX_LAT_BG 384
+/* Tx latency for 40MHz (turbo) operation (min ?) */
+#define AR5K_INIT_TX_LAT_MIN 32
+
+/* Tx frame to Tx data start delay */
+#define AR5K_INIT_TXF2TXD_START_DEFAULT 14
+#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12
+#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13
+
+/* Default Tx/Rx latencies (same for 5211)*/
+#define AR5K_INIT_TX_LATENCY_5210 54
+#define AR5K_INIT_RX_LATENCY_5210 29
+
/* GENERIC CHIPSET DEFINITIONS */
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 02869c7..706fc46 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1235,7 +1235,6 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
}
ah->ah_current_channel = channel;
- ath5k_hw_set_clockrate(ah);
return 0;
}
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 778fb59..f89bc94 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -253,10 +253,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ?
AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
- /* Set Transmit Latency */
- ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ?
- AR5K_INIT_TRANSMIT_LATENCY_TURBO :
- AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
/* Set IFS0 */
if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index e4900e1..a013bdf 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -86,16 +86,21 @@ unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
}
/**
- * ath5k_hw_set_clockrate - Set common->clockrate for the current channel
+ * ath5k_hw_init_core_clock - Initialize core clock
*
- * @ah: The &struct ath5k_hw
+ * @ah The &struct ath5k_hw
+ *
+ * Initialize core clock parameters (usec, usec32, latencies etc).
*/
-void ath5k_hw_set_clockrate(struct ath5k_hw *ah)
+static void ath5k_hw_init_core_clock(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
struct ath_common *common = ath5k_hw_common(ah);
- int clock;
+ u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs;
+ /*
+ * Set core clock frequency
+ */
if (channel->hw_value & CHANNEL_5GHZ)
clock = 40; /* 802.11a */
else if (channel->hw_value & CHANNEL_CCK)
@@ -103,11 +108,109 @@ void ath5k_hw_set_clockrate(struct ath5k_hw *ah)
else
clock = 44; /* 802.11g */
- /* Clock rate in turbo modes is twice the normal rate */
- if (channel->hw_value & CHANNEL_TURBO)
+ /* Use clock multiplier for non-default
+ * bwmode */
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
clock *= 2;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ clock /= 2;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ clock /= 4;
+ break;
+ default:
+ break;
+ }
common->clockrate = clock;
+
+ /*
+ * Set USEC parameters
+ */
+ /* Set USEC counter on PCU*/
+ usec = clock - 1;
+ usec = AR5K_REG_SM(usec, AR5K_USEC_1);
+
+ /* Set usec duration on DCU */
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+ AR5K_DCU_GBL_IFS_MISC_USEC_DUR,
+ clock);
+
+ /* Set 32MHz USEC counter */
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413))
+ /* Remain on 40MHz clock ? */
+ sclock = 40 - 1;
+ else
+ sclock = 32 - 1;
+ sclock = AR5K_REG_SM(sclock, AR5K_USEC_32);
+
+ /*
+ * Set tx/rx latencies
+ */
+ usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+ txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211);
+
+ /*
+ * 5210 initvals don't include usec settings
+ * so we need to use magic values here for
+ * tx/rx latencies
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ /* same for turbo */
+ txlat = AR5K_INIT_TX_LATENCY_5210;
+ rxlat = AR5K_INIT_RX_LATENCY_5210;
+ }
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ /* 5311 has different tx/rx latency masks
+ * from 5211, since we deal 5311 the same
+ * as 5211 when setting initvals, shift
+ * values here to their proper locations
+ *
+ * Note: Initvals indicate tx/rx/ latencies
+ * are the same for turbo mode */
+ txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210);
+ rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210);
+ } else
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_10MHZ:
+ txlat = AR5K_REG_SM(txlat * 2,
+ AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ txlat = AR5K_REG_SM(txlat * 4,
+ AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ;
+ break;
+ case AR5K_BWMODE_40MHZ:
+ txlat = AR5K_INIT_TX_LAT_MIN;
+ rxlat = AR5K_REG_SM(rxlat / 2,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
+ break;
+ default:
+ break;
+ }
+
+ usec_reg = (usec | sclock | txlat | rxlat);
+ ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC);
+
+ /* On 5112 set tx frane to tx data start delay */
+ if (ah->ah_radio == AR5K_RF5112) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2,
+ AR5K_PHY_RF_CTL2_TXF2TXD_START,
+ txf2txs);
+ }
}
/*
@@ -122,7 +225,7 @@ void ath5k_hw_set_clockrate(struct ath5k_hw *ah)
static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 scal, spending, usec32;
+ u32 scal, spending;
/* Only set 32KHz settings if we have an external
* 32KHz crystal present */
@@ -179,6 +282,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+ /* Set DAC/ADC delays */
ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
@@ -201,13 +305,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
spending = 0x18;
ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
- if ((ah->ah_radio == AR5K_RF5112) ||
- (ah->ah_radio == AR5K_RF5413))
- usec32 = 39;
- else
- usec32 = 31;
- AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
-
+ /* Set up tsf increment on each cycle */
AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
}
}
@@ -822,6 +920,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
freq = 0;
mode = 0;
+
/*
* Stop PCU
*/
@@ -971,6 +1070,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
if (ret)
return ret;
+ /* Initialize core clock settings */
+ ath5k_hw_init_core_clock(ah);
+
/*
* Tweak initval settings for revised
* chipsets and add some more config
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
