Hi, We are running linux_2.6.35 on our pxa255 based embedded device. recently I am trying to bring up hostapd but so far not successful and I need your expert advice. hostapd(0.6.10) and libnl(2.0) are the versions I am using. hostapd.conf is as follows: interface=eth1 driver=nl80211 ssid=Testnet channel=8 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP I tried with 2 network interfaces (not simultaneously) and following is the error messages. 1. cisco 350 pcmcia wireless card - on running ./hostapd -dd hostapd.conf it gives failed to create interface mon.eth1. 2. realtek 8187 usb wireless card - ELOOP: remaining socket: sock=5 eloop_data=0x4c710 user_data=(nil) handler=0x2fb34 I was using wpa_supplicant to configure the interface in two cards and it is working fine. Please let me know, how to debug this issue further. Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
