Set the default led mode for different devices.
For the newer devices such as 6000g2a, 6000g2b and newer,
the default led mode is On/Off instead of blinking.
The led_mode still can be control through module parameter
0: system default
1: On/Off
2: blinking
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-1000.c | 4 ++++
drivers/net/wireless/iwlwifi/iwl-3945.c | 2 ++
drivers/net/wireless/iwlwifi/iwl-4965.c | 1 +
drivers/net/wireless/iwlwifi/iwl-5000.c | 7 +++++++
drivers/net/wireless/iwlwifi/iwl-6000.c | 18 ++++++++++++++++++
drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++
drivers/net/wireless/iwlwifi/iwl-led.c | 10 ++++++----
drivers/net/wireless/iwlwifi/iwl-led.h | 6 ++++--
8 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 068f1e1..e881b08 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -287,6 +287,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.ht_params = &iwl1000_ht_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl1000_bg_cfg = {
@@ -302,6 +303,7 @@ struct iwl_cfg iwl1000_bg_cfg = {
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl100_bgn_cfg = {
@@ -318,6 +320,7 @@ struct iwl_cfg iwl100_bgn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.ht_params = &iwl1000_ht_params,
+ .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl100_bg_cfg = {
@@ -333,6 +336,7 @@ struct iwl_cfg iwl100_bg_cfg = {
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
+ .led_mode = IWL_LED_RF_STATE,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index ebac04b..4503245 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2788,6 +2788,7 @@ static struct iwl_cfg iwl3945_bg_cfg = {
.ops = &iwl3945_ops,
.mod_params = &iwl3945_mod_params,
.base_params = &iwl3945_base_params,
+ .led_mode = IWL_LED_BLINK,
};
static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2800,6 +2801,7 @@ static struct iwl_cfg iwl3945_abg_cfg = {
.ops = &iwl3945_ops,
.mod_params = &iwl3945_mod_params,
.base_params = &iwl3945_base_params,
+ .led_mode = IWL_LED_BLINK,
};
DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index a172bd1..19da3e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2636,6 +2636,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
.ops = &iwl4965_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl4965_base_params,
+ .led_mode = IWL_LED_BLINK,
/*
* Force use of chains B and C for scan RX on 5 GHz band
* because the device has off-channel reception on chain A.
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index ad43f0f..b147580 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -536,6 +536,7 @@ struct iwl_cfg iwl5300_agn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_bgn_cfg = {
@@ -552,6 +553,7 @@ struct iwl_cfg iwl5100_bgn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_abg_cfg = {
@@ -567,6 +569,7 @@ struct iwl_cfg iwl5100_abg_cfg = {
.ops = &iwl5000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_agn_cfg = {
@@ -583,6 +586,7 @@ struct iwl_cfg iwl5100_agn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5350_agn_cfg = {
@@ -599,6 +603,7 @@ struct iwl_cfg iwl5350_agn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5150_agn_cfg = {
@@ -616,6 +621,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5150_abg_cfg = {
@@ -632,6 +638,7 @@ struct iwl_cfg iwl5150_abg_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index d8f9df6..9f835ac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -567,6 +567,7 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6000g2a_2abg_cfg = {
@@ -584,6 +585,7 @@ struct iwl_cfg iwl6000g2a_2abg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6000g2a_2bg_cfg = {
@@ -601,6 +603,7 @@ struct iwl_cfg iwl6000g2a_2bg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6000g2b_2agn_cfg = {
@@ -620,6 +623,7 @@ struct iwl_cfg iwl6000g2b_2agn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -640,6 +644,7 @@ struct iwl_cfg iwl6000g2b_2abg_cfg = {
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -661,6 +666,7 @@ struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -681,6 +687,7 @@ struct iwl_cfg iwl6000g2b_2bg_cfg = {
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -702,6 +709,7 @@ struct iwl_cfg iwl6000g2b_bgn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -722,6 +730,7 @@ struct iwl_cfg iwl6000g2b_bg_cfg = {
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -744,6 +753,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
@@ -760,6 +770,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
@@ -776,6 +787,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6050_2agn_cfg = {
@@ -793,6 +805,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6050g2_bgn_cfg = {
@@ -810,6 +823,7 @@ struct iwl_cfg iwl6050g2_bgn_cfg = {
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6050_2abg_cfg = {
@@ -826,6 +840,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000_3agn_cfg = {
@@ -843,6 +858,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl130_bgn_cfg = {
@@ -861,6 +877,7 @@ struct iwl_cfg iwl130_bgn_cfg = {
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
@@ -880,6 +897,7 @@ struct iwl_cfg iwl130_bg_cfg = {
.base_params = &iwl6000_coex_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
+ .led_mode = IWL_LED_RF_STATE,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 98b79f6..9035cd8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -363,6 +363,7 @@ struct iwl_ht_params {
* @need_dc_calib: need to perform init dc calibration
* @need_temp_offset_calib: need to perform temperature offset calibration
* @scan_antennas: available antenna for scan operation
+ * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -409,6 +410,7 @@ struct iwl_cfg {
const bool need_temp_offset_calib; /* if used set to true */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
+ enum iwl_led_mode led_mode;
};
/***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 5a91292..516e557 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -45,9 +45,8 @@
/* default: IWL_LED_BLINK(0) using blinking index table */
static int led_mode;
module_param(led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "led mode: 0=blinking, 1=On(RF On)/Off(RF Off), "
- "(default 0)");
-
+MODULE_PARM_DESC(led_mode, "led mode: 0=system default, "
+ "1=On(RF On)/Off(RF Off), 2=blinking");
static const struct {
u16 tpt; /* Mb/s */
@@ -128,7 +127,7 @@ EXPORT_SYMBOL(iwl_led_start);
int iwl_led_associate(struct iwl_priv *priv)
{
IWL_DEBUG_LED(priv, "Associated\n");
- if (led_mode == IWL_LED_BLINK)
+ if (priv->cfg->led_mode == IWL_LED_BLINK)
priv->allow_blinking = 1;
priv->last_blink_time = jiffies;
@@ -223,5 +222,8 @@ void iwl_leds_init(struct iwl_priv *priv)
priv->last_blink_rate = 0;
priv->last_blink_time = 0;
priv->allow_blinking = 0;
+ if (led_mode != IWL_LED_DEFAULT &&
+ led_mode != priv->cfg->led_mode)
+ priv->cfg->led_mode = led_mode;
}
EXPORT_SYMBOL(iwl_leds_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 49a70ba..9079b33 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -47,14 +47,16 @@ enum led_type {
/*
* LED mode
- * IWL_LED_BLINK: adjust led blink rate based on blink table
+ * IWL_LED_DEFAULT: use system default
* IWL_LED_RF_STATE: turn LED on/off based on RF state
* LED ON = RF ON
* LED OFF = RF OFF
+ * IWL_LED_BLINK: adjust led blink rate based on blink table
*/
enum iwl_led_mode {
- IWL_LED_BLINK,
+ IWL_LED_DEFAULT,
IWL_LED_RF_STATE,
+ IWL_LED_BLINK,
};
void iwl_leds_init(struct iwl_priv *priv);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
