On 12/11/10 13:06, Larry Finger wrote:
On 11/12/2010 05:06 AM, Robie Basak wrote:
On 2010-11-12, Larry Finger<Larry.Finger@xxxxxxxxxxxx> wrote:
On 11/11/2010 06:41 PM, Robie Basak wrote:
I'm getting a panic when I to turn off the wireless using the Fn-F2
combination on my Asus Eee PC 701SDX. Although I'm using Ubuntu 10.10,
I've tried it using the mainline kernel (as supplied by Ubuntu for
testing bugs against mainline). So far I've reproduced consistently
against Ubuntu's 2.6.35-22-generic-pae as well as Ubuntu-supplied
mainstream 2.6.35-02063504.201008271919 and
2.6.37-020637rc1.201011020905.
Is Fn-F2 the radio kill switch?
Yes, that's right.
At this point, I see no point in building a mainstream kernel.
Do you have another host that might be setup as a net console?
Yes, I managed to get net console working (eventually):
(the first four lines are from when I modprobed r8187se)
[ 941.787361] r8187se: module is from the staging directory, the quality is unknown, you have been warned.
[ 941.821968] rtl8180_init:Error channel plan! Set to default.
[ 941.825000] Dot11d_Init()
[ 941.877241] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[ 947.318002] ------------[ cut here ]------------
[ 947.321315] WARNING: at /home/kernel-ppa/COD/linux/fs/proc/generic.c:816 remove_proc_entry+0x1e5/0x240()
[ 947.328160] Hardware name: 701SDX
[ 947.331607] name 'wlan0'
[ 947.334987] Modules linked in: r8187se(C) netconsole eeprom_93cx6 parport_pc ppdev binfmt_misc snd_hda_codec_realtek snd_hda_intel i915 snd_hda_codec snd_hwdep snd_pcm drm_kms_helper joydev snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq drm snd_timer snd_seq_device intel_agp i2c_algo_bit intel_gtt snd psmouse eeepc_laptop video shpchp soundcore serio_raw agpgart sparse_keymap snd_page_alloc output led_class lp parport atl1e configfs [last unloaded: r8187se]
[ 947.354968] Pid: 1350, comm: kworker/0:2 Tainted: G WC 2.6.37-020637rc1-generic #201011020905
[ 947.363331] Call Trace:
[ 947.367541] [<c02700d5>] ? remove_proc_entry+0x1e5/0x240
--snip--
[ 947.491911] Kernel panic - not syncing: HwThreeWire(): CmdReg: 0XFF RE|WE bits are not clear!!
[ 947.491916]
[ 947.498375] Pid: 1350, comm: kworker/0:2 Tainted: G WC 2.6.37-020637rc1-generic #201011020905
[ 947.505177] Call Trace:
[ 947.508561] [<c014f90f>] panic+0x5f/0x190
[ 947.511965] [<e02ccd3f>] HwHSSIThreeWire+0x4f/0x270 [r8187se]
[ 947.515424] [<e02ccfd2>] RF_WriteReg+0x32/0x40 [r8187se]
[ 947.518877] [<e02cb29a>] rtl8225z2_rf_close+0x1a/0x50 [r8187se]
[ 947.522384] [<e02dd885>] rtl8180_pci_remove+0x45/0x107 [r8187se]
[ 947.525861] [<c0420206>] ? __pm_runtime_resume+0x46/0x60
[ 947.529347] [<c038372a>] pci_device_remove+0
Thanks for the netconsole output. That helps a lot.
The warning in remove_proc_entry() is essentially harmless. I'll take care of
that later.
The driver should never panic over a condition as trivial as the RE/WE bits are
not zero. I missed that when I worked on the original version of the driver. As
the bits are all 1, it appears that the device is partially disabled before this
code is reached. One thing I notice is that there is no lock around the
unregister_netdevice() call.
Attached are two patches. One changes the panic statements into log entries with
a stack dump, and the second provides a lock for the call noted above. The first
patch cannot cause any problems; however, the second may cause the machine to
freeze. At least with the first, the system will no longer crash.
While you are testing these, I'll try to sort out why there is a warning in
remove_proc_entry().
Larry
f
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
