From: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
CONFIG_RT2800PCI_PCI and CONFIG_RT2800PCI_SOC are strictly not needed
as we can check the dependent symbols directly in the rest of Kconfig
and the code, so clean up the Kconfig namespace a bit.
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/Kconfig | 16 ++-----------
drivers/net/wireless/rt2x00/rt2800pci.c | 34 +++++++++++++++---------------
2 files changed, 20 insertions(+), 30 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index a6939cc..ade3025 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -53,22 +53,12 @@ config RT61PCI
When compiled as a module, this driver will be called rt61pci.
-config RT2800PCI_PCI
- boolean
- depends on PCI
- default y
-
-config RT2800PCI_SOC
- boolean
- depends on RALINK_RT288X || RALINK_RT305X
- default y
-
config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
- depends on RT2800PCI_PCI || RT2800PCI_SOC
+ depends on PCI || RALINK_RT288X || RALINK_RT305X
select RT2800_LIB
- select RT2X00_LIB_PCI if RT2800PCI_PCI
- select RT2X00_LIB_SOC if RT2800PCI_SOC
+ select RT2X00_LIB_PCI if PCI
+ select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
select RT2X00_LIB_HT
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 97f4df6..b0946f8 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -84,7 +84,7 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
@@ -95,9 +95,9 @@ static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
}
-#endif /* CONFIG_RT2800PCI_SOC */
+#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
@@ -181,7 +181,7 @@ static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
{
}
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
/*
* Firmware functions
@@ -1031,7 +1031,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
/*
* RT2800pci module information.
*/
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -1061,19 +1061,19 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
#endif
{ 0, }
};
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
MODULE_FIRMWARE(FIRMWARE_RT2860);
MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
static int rt2800soc_probe(struct platform_device *pdev)
{
return rt2x00soc_probe(pdev, &rt2800pci_ops);
@@ -1090,9 +1090,9 @@ static struct platform_driver rt2800soc_driver = {
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};
-#endif /* CONFIG_RT2800PCI_SOC */
+#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
static struct pci_driver rt2800pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2800pci_device_table,
@@ -1101,21 +1101,21 @@ static struct pci_driver rt2800pci_driver = {
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
};
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
static int __init rt2800pci_init(void)
{
int ret = 0;
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
ret = platform_driver_register(&rt2800soc_driver);
if (ret)
return ret;
#endif
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
ret = pci_register_driver(&rt2800pci_driver);
if (ret) {
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
return ret;
@@ -1127,10 +1127,10 @@ static int __init rt2800pci_init(void)
static void __exit rt2800pci_exit(void)
{
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
pci_unregister_driver(&rt2800pci_driver);
#endif
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
}
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
