On Mon 2010-11-01 10:46:49, Pavel Machek wrote: > Hi! > > > > I'm testing driver from -wireless testing, cca 2.6.26-rc7. > > > > > > It seems to work (up to 802.11n speeds -- I've seen iwconfig claiming > > > 121 MB/sec), but disconnects rather quickly when under load: > > > > > > telnet 192.168.1.3 chargen > /dev/null > > > > > > The machine is powerpc mpc5200b board, with OHCI driver -- it is not > > > capable of USB2.0 speeds. > > > > So I tried with different AP, one not capable of 802.11n speeds. It > > fails in different way :-(. But this one is with my backport to > > 2.6.34... > > But it fails with wireless-testing tree, too :-(. > > Linux mpc5200b 2.6.36-rc8-wl-pma-48197-gdcae733-dirty #43 Tue Oct 26 > 12:06:21 CEST 2010 ppc It works "better" if I force AP to 1Mbps.... (Note that I have USB1.1 host only). Pavel Registered led device: carl9170-phy1::assoc usb 1-1: Atheros AR9170 is registered as 'phy1' ieee80211 phy1: device now idle ieee80211 phy1: device no longer idle - scanning wlan0: authenticate with 00:11:95:05:30:d7 (try 1) wlan0: authenticated ieee80211 phy1: device now idle ieee80211 phy1: device no longer idle - working wlan0: associate with 00:11:95:05:30:d7 (try 1) wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy1: Allocated STA 00:11:95:05:30:d7 ieee80211 phy1: Inserted STA 00:11:95:05:30:d7 ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET ieee80211 phy1: FW: MAC RESET -/bin/sh-3.00# -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
