Hello, I have a Olimex SAM9-L9260-Board (http://www.olimex.com/dev/sam9-L9260.html), which has an ARM-Processor. I used many devices on this hardware, mostly over usb (UMTS-Modems, Sticks...). Everything worked. I saw that i can use the ar9170usb-driver for wireless, so i bought a Netgear WN111v2 (http://linuxwireless.org/en/users/Drivers/ar9170). Then i installed the needed firmware. But it didnt work. This is the output: usb 1-1.3: new full speed USB device using at91_ohci and address 3 usb 1-1.3: New USB device found, idVendor=0846, idProduct=9001 usb 1-1.3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 usb 1-1.3: Product: USB2.0 WLAN usb 1-1.3: Manufacturer: ATHER usb 1-1.3: SerialNumber: 12345 cfg80211: Calling CRDA to update world regulatory domain usb 1-1.3: reset full speed USB device using at91_ohci and address 3 usbcore: registered new interface driver ar9170usb usb 1-1.3: firmware: requesting ar9170. fw usb 1-1.3: USB setup failed (-32). I searched everywhere the errormessage with the errorcode -32, but i didnt find a meaning. On the pc the wireless-stick works perfectly (with the same firmware). Has someone an idea what i can do? Thanks Best Regards -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
