Search Linux Wireless

Re: b43/SSB: SPROM revision problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



W dniu 22 paÅdziernika 2010 14:41 uÅytkownik RafaÅ MiÅecki
<zajec5@xxxxxxxxx> napisaÅ:
> W dniu 22 paÅdziernika 2010 13:23 uÅytkownik RafaÅ MiÅecki
> <zajec5@xxxxxxxxx> napisaÅ:
>> I've problem with initializing N radio (2055) on my Broadcom card.
>>
>> In case of my card simple workaround [1] for radio initialization is
>> needed. If I do not use workaround radio simply does not start. I
>> dumped MMIO operations of "wl" and it uses workaround for my card as
>> well.
>>
>> The problem is that workaround condition is SPROM-based. It looks like this:
>> if (sprom->revision < 4)
>> Â Â Â Âworkaround = (some_specific_card);
>> else
>> Â Â Â Âworkaround = ((sprom->boardflags_hi & B43_BFH_NOPA) == 0);
>>
>> So now goes the tricky part. My SSB has following SPROM:
>> [ 6208.080097] ssb: SPROM offset is 0x1000
>> [ 6208.089815] ssb: SPROM revision 5 detected.
>>
>> However in drivers/ssb/pci.c there are some translations, including
>> one for my card. My SPROM revision gets translated to 4. The result
>> is:
>> sprom->revision: 4
>> sprom->boardflags_hi: 0x1
>>
>> With that revision and boardflags workaround is not used and my radio
>> does not init. There are two possibilities:
>> 1) Specs are wrong
>> 2) We do SPROM translation incorrectly
>>
>> Any hints about that?
>>
>>
>> [1] http://bcm-v4.sipsolutions.net/802.11/Radio/2055/Init#Post_Init
>
> Ahhh, I should check for boardflags2! Expect patches soon ;)

Larry: could you check this and fix specs if I am right?

The way I understand this is following:
1) Workaround registers are:
a) 0x77: Core 1 RX Baseband Regulator
b) 0xa6: Core 2 RX Baseband Regulator
that really looks like regulatory-related
2) 0x00010000 BFL_NOPA has no PA
doesn't look like regulatory related
3) 0x00000001 BFL2_RXBB_INT_REG_DI external RX BB regulator present
looks like sth-related, so I guess we need to check for boardflags2

-- 
RafaÅ
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux