On Thu, Oct 14, 2010 at 10:32:05AM +0200, Stanislaw Gruszka wrote: > > Looks good, the only thing is if priv->tx_power_user_lmt == > > priv->tx_power_next, we don't even have to call set_tx_power, but I > > guess calling it won't hurt, so its your decision check or not. > > I'll will call iwl_set_tx_power( ... , false); what seems to be right > thing to do. Set tx power have to be forces. Without that I get iwlagn 0000:40:00.0: low ack count detected, restart firmware iwlagn 0000:40:00.0: On demand firmware reload iwlagn 0000:40:00.0: Stopping AGG while state not ON or starting iwlagn 0000:40:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 0 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 1 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 0 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 0 iwlagn 0000:40:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:40:00.0: low ack count detected, restart firmware iwlagn 0000:40:00.0: On demand firmware reload iwlagn 0000:40:00.0: Stopping AGG while state not ON or starting iwlagn 0000:40:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:40:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:40:00.0: low ack count detected, restart firmware iwlagn 0000:40:00.0: On demand firmware reload iwlagn 0000:40:00.0: Stopping AGG while state not ON or starting iwlagn 0000:40:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 4 iwlagn 0000:40:00.0: Aggregation not enabled for tid 0 because load = 0 on 5300 and device was unusable in general. Hence I will only comment that forcing send tx power after scan is needed. Stanislaw -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
