On 19/10/2010 17:18, Grazvydas Ignotas wrote:
I have also set the debug ALL mode to see if I get something that can help
you out on finding the problem.
When uploading only wl1251 nothing appears in dmesg. But when uploading
module spi, I got the following info: http://pastebin.com/ysdTSDnB
You need both wl1251 and spi. This is normal output, you should get
wlan0 interface at this point.
--
Yes, that is what I was expecting from the begining but although phy0
should appear in /sys/class/ieee80211, this directory is empty :(
It seems that it tries to do something but it is not finally done.
However, as you can see it seems there is no error (at least reported).
Could it be that spi_read buf is almost everytime reading 00 00 00 00?
Another issue is that I have to manually upload the spi module as by
default it only uploads wl1251 but not the spi. But this is not a big deal.
Again, thank you all for the help... You are almost there (I cannot say
we as I've been only following your advices).
TA
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
