Add 11n ability in scan, connection and using MCS rates.
The configuration is temporary due to the code incomplete and
still in testing process. That plans to be remove in the future.
Signed-off-by: Shahar Levi <shahar_levi@xxxxxx>
---
drivers/net/wireless/wl12xx/Kconfig | 10 +++
drivers/net/wireless/wl12xx/wl1271_main.c | 95 +++++++++++++++++++++++-----
drivers/net/wireless/wl12xx/wl1271_rx.c | 6 ++
drivers/net/wireless/wl12xx/wl1271_tx.c | 11 ++++
4 files changed, 103 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 4a8bb25..36deb6e 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -52,6 +52,16 @@ config WL1271
If you choose to build a module, it'll be called wl1271. Say N if
unsure.
+config WL1271_HT
+ bool "TI wl1271 802.11 HT support (EXPERIMENTAL)"
+ depends on WL1271 && EXPERIMENTAL
+ default n
+ ---help---
+ This will enable 802.11 HT support for TI wl1271 chipset.
+
+ That configuration is temporary due to the code incomplete and
+ still in testing process.
+
config WL1271_SPI
tristate "TI wl1271 SPI support"
depends on WL1271 && SPI_MASTER
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 1b4c970..88a1113 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -853,10 +853,23 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
/* peek into the rates configured in the STA entry */
spin_lock_irqsave(&wl->wl_lock, flags);
- if (sta && sta->supp_rates[conf->channel->band] != wl->sta_rate_set) {
+ if (sta &&
+ (sta->supp_rates[conf->channel->band] !=
+ (wl->sta_rate_set & HW_BG_RATES_MASK))) {
wl->sta_rate_set = sta->supp_rates[conf->channel->band];
set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
}
+
+ if (sta &&
+ sta->ht_cap.ht_supported &&
+ ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) !=
+ sta->ht_cap.mcs.rx_mask[0])) {
+ /* Clean MCS bits before setting them */
+ wl->sta_rate_set &= HW_BG_RATES_MASK;
+ wl->sta_rate_set |=
+ (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET);
+ set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
+ }
spin_unlock_irqrestore(&wl->wl_lock, flags);
/* queue the packet */
@@ -1709,6 +1721,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
{
enum wl1271_cmd_ps_mode mode;
struct wl1271 *wl = hw->priv;
+ struct ieee80211_sta *sta = ieee80211_find_sta(vif, bss_conf->bssid);
bool do_join = false;
bool set_assoc = false;
int ret;
@@ -1927,6 +1940,45 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
}
}
+ if (sta) {
+ /*
+ * Takes care of: New association with HT enable,
+ * HT information change in beacon.
+ */
+ if ((changed & BSS_CHANGED_HT) &&
+ (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
+ ret = wl1271_acx_set_ht_capabilities(wl,
+ &sta->ht_cap,
+ true);
+ if (ret < 0) {
+ wl1271_warning("Set ht cap true failed %d",
+ ret);
+ goto out_sleep;
+ }
+
+ ret = wl1271_acx_set_ht_information(wl,
+ bss_conf->ht_operation_mode);
+ if (ret < 0) {
+ wl1271_warning("Set ht information failed %d",
+ ret);
+ goto out_sleep;
+ }
+ }
+ /*
+ * Takes care of: New association without HT,
+ * Disassociate.
+ */
+ else if (changed & BSS_CHANGED_ASSOC) {
+ ret = wl1271_acx_set_ht_capabilities(wl,
+ &sta->ht_cap,
+ false);
+ if (ret < 0) {
+ wl1271_warning("Set ht cap false failed %d",
+ ret);
+ goto out_sleep;
+ }
+ }
+ }
+
if (changed & BSS_CHANGED_ARP_FILTER) {
__be32 addr = bss_conf->arp_addr_list[0];
WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
@@ -2107,14 +2158,14 @@ static struct ieee80211_channel wl1271_channels[] = {
/* mapping to indexes for wl1271_rates */
static const u8 wl1271_rate_to_idx_2ghz[] = {
/* MCS rates are used only with 11n */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+ 7, /* CONF_HW_RXTX_RATE_MCS7 */
+ 6, /* CONF_HW_RXTX_RATE_MCS6 */
+ 5, /* CONF_HW_RXTX_RATE_MCS5 */
+ 4, /* CONF_HW_RXTX_RATE_MCS4 */
+ 3, /* CONF_HW_RXTX_RATE_MCS3 */
+ 2, /* CONF_HW_RXTX_RATE_MCS2 */
+ 1, /* CONF_HW_RXTX_RATE_MCS1 */
+ 0, /* CONF_HW_RXTX_RATE_MCS0 */
11, /* CONF_HW_RXTX_RATE_54 */
10, /* CONF_HW_RXTX_RATE_48 */
@@ -2137,6 +2188,7 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
/* 11n STA capabilities */
#define HW_RX_HIGHEST_RATE 65
+#ifdef CONFIG_WL1271_HT
#define WL1271_HT_CAP { \
.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \
.ht_supported = true, \
@@ -2148,6 +2200,11 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
.tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
}, \
}
+#else
+#define WL1271_HT_CAP { \
+ .ht_supported = false, \
+}
+#endif
/* can't be const, mac80211 writes to this */
static struct ieee80211_supported_band wl1271_band_2ghz = {
@@ -2155,6 +2212,7 @@ static struct ieee80211_supported_band wl1271_band_2ghz = {
.n_channels = ARRAY_SIZE(wl1271_channels),
.bitrates = wl1271_rates,
.n_bitrates = ARRAY_SIZE(wl1271_rates),
+ .ht_cap = WL1271_HT_CAP,
};
/* 5 GHz data rates for WL1273 */
@@ -2237,14 +2295,14 @@ static struct ieee80211_channel wl1271_channels_5ghz[] = {
/* mapping to indexes for wl1271_rates_5ghz */
static const u8 wl1271_rate_to_idx_5ghz[] = {
/* MCS rates are used only with 11n */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+ 7, /* CONF_HW_RXTX_RATE_MCS7 */
+ 6, /* CONF_HW_RXTX_RATE_MCS6 */
+ 5, /* CONF_HW_RXTX_RATE_MCS5 */
+ 4, /* CONF_HW_RXTX_RATE_MCS4 */
+ 3, /* CONF_HW_RXTX_RATE_MCS3 */
+ 2, /* CONF_HW_RXTX_RATE_MCS2 */
+ 1, /* CONF_HW_RXTX_RATE_MCS1 */
+ 0, /* CONF_HW_RXTX_RATE_MCS0 */
7, /* CONF_HW_RXTX_RATE_54 */
6, /* CONF_HW_RXTX_RATE_48 */
@@ -2269,6 +2327,7 @@ static struct ieee80211_supported_band wl1271_band_5ghz = {
.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
.bitrates = wl1271_rates_5ghz,
.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
+ .ht_cap = WL1271_HT_CAP,
};
static const u8 *wl1271_band_rate_to_idx[] = {
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index bea133b..ac13f7d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -53,6 +53,12 @@ static void wl1271_rx_status(struct wl1271 *wl,
status->band = wl->band;
status->rate_idx = wl1271_rate_to_idx(wl, desc->rate);
+#ifdef CONFIG_WL1271_HT
+ /* 11n support */
+ if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
+ status->flag |= RX_FLAG_HT;
+#endif
+
status->signal = desc->rssi;
/*
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index e3dc13c..6a87633 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -201,6 +201,17 @@ u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
rate_set >>= 1;
}
+#ifdef CONFIG_WL1271_HT
+ /* MCS rates indication are on bits 16 - 23 */
+ rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates;
+
+ for (bit = 0; bit < 8; bit++) {
+ if (rate_set & 0x1)
+ enabled_rates |= (CONF_HW_BIT_RATE_MCS_0 << bit);
+ rate_set >>= 1;
+ }
+#endif
+
return enabled_rates;
}
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
