Search Linux Wireless

Re: Release of Maranello firmware source code for Broadcom cards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2010-10-10 at 18:49 +0200, francesco.gringoli@xxxxxxxxxxxx
wrote:

> yes, the firmware works in AP mode, it is the basic AP mode implemented
> by OpenFWWF. And yes, both AP and STA implement partial packet recovery.
> We tested both directions and in our testbed (and most importantly with
> the hardware we have... unfortunately not all 4318/06 are equal :-( )
> it was stable and we never experienced crashes.

So it is possible to disable the Maranello feature in that firmware
(via SHM parameter or possibly also compiletime switch) to run it in
standard mode?
I think that would get the firmware base a lot more testing coverage.

-- 
Greetings Michael.

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux