Search Linux Wireless

Re: [RFC v5]update broken web addresses in the kernel.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Sep 2010, Justin P. Mattock wrote:

> o.k... I'll make the changes to the arch patch, and combine the two, and 
> send it to jiri..

Why?

My advice is don't do it unless you want to waste reviewers' time.

> as for the names and signed offs is what is below fine or do I need to 
> change some of them?

If you combine patch 1 and patch 2 and submit that as patch 3, you will 
likely have to CC patch 3 to everyone to whom you sent patch 1 plus 
everyone to whom you sent patch 2. You must also change any "acked-by" to 
"Cc", since patch 3 is new.

Keep the same CC list since Jiri is already on it ("trivial@xxxxxxxxxx").

Finn

> > 
> > Looks good to me.
> > 
> > Finn
> > 
> > 
> > On Mon, 27 Sep 2010, Justin P. Mattock wrote:
> > 
> > > Below is an updated patch to fix broken web addresses in the kernel.
> > > Please let me know if I missed anything, and I'll go back and fix it.
> > > and lastly Thanks for all the help with this...
> > > 
> > > Signed-off-by: Justin P. Mattock<justinmattock@xxxxxxxxx>
> > > Cc: Maciej W. Rozycki<macro@xxxxxxxxxxxxxx>
> > > Cc: Geert Uytterhoeven<geert@xxxxxxxxxxxxxx>
> > > Cc: Finn Thain<fthain@xxxxxxxxxxxxxxxxxxx>
> > > Cc: Randy Dunlap<rdunlap@xxxxxxxxxxxx>
> > > Cc: Matt Turner<mattst88@xxxxxxxxx>
> > > Cc: Dimitry Torokhov<dmitry.torokhov@xxxxxxxxx>
> > > Cc: Mike Frysinger<vapier.adi@xxxxxxxxx>
> > > Acked-by: Ben Pfaff<blp@xxxxxxxxxxxxxxx>
> > > Acked-by: Hans J. Koch<hjk@xxxxxxxxxxxxx>
> > > 
> > > ---
> > >   drivers/ata/pata_it821x.c                       |    4 ++--
> > >   drivers/atm/Kconfig                             |    2 +-
> > >   drivers/char/agp/Kconfig                        |    2 +-
> > >   drivers/char/agp/i460-agp.c                     |    2 +-
> > >   drivers/char/apm-emulation.c                    |    4 ++--
> > >   drivers/char/ipmi/ipmi_bt_sm.c                  |    2 +-
> > >   drivers/char/ipmi/ipmi_si_intf.c                |    3 +--
> > >   drivers/char/n_r3964.c                          |    1 -
> > >   drivers/char/pcmcia/Kconfig                     |    4 ++--
> > >   drivers/char/tpm/Kconfig                        |    2 +-
> > >   drivers/char/tpm/tpm_infineon.c                 |    2 +-
> > >   drivers/edac/edac_device_sysfs.c                |    2 +-
> > >   drivers/edac/i82443bxgx_edac.c                  |    2 +-
> > >   drivers/firmware/Kconfig                        |    4 ++--
> > >   drivers/firmware/edd.c                          |    2 +-
> > >   drivers/firmware/pcdp.h                         |    4 ++--
> > >   drivers/gpu/drm/drm_modes.c                     |    2 +-
> > >   drivers/hwmon/adm1025.c                         |    2 +-
> > >   drivers/hwmon/adm1026.c                         |    2 +-
> > >   drivers/hwmon/f75375s.c                         |    4 ++--
> > >   drivers/hwmon/g760a.c                           |    2 +-
> > >   drivers/hwmon/hwmon-vid.c                       |    2 +-
> > >   drivers/ide/hpt366.c                            |    2 +-
> > >   drivers/ide/ht6560b.c                           |    1 -
> > >   drivers/infiniband/Kconfig                      |    4 ++--
> > >   drivers/infiniband/hw/cxgb3/Kconfig             |    2 +-
> > >   drivers/infiniband/hw/cxgb4/Kconfig             |    2 +-
> > >   drivers/infiniband/ulp/iser/Kconfig             |    2 +-
> > >   drivers/input/joystick/gamecon.c                |    3 +--
> > >   drivers/input/misc/cm109.c                      |    2 +-
> > >   drivers/input/mouse/Kconfig                     |    1 +
> > >   drivers/input/mouse/touchkit_ps2.c              |    4 ++--
> > >   drivers/input/touchscreen/mk712.c               |    2 +-
> > >   drivers/isdn/i4l/isdn_audio.c                   |    2 +-
> > >   drivers/macintosh/therm_adt746x.c               |    6 +++---
> > >   drivers/media/IR/keymaps/rc-manli.c             |    1 -
> > >   drivers/media/dvb/ttpci/av7110.c                |   10 ++--------
> > >   drivers/media/dvb/ttpci/av7110_av.c             |    2 +-
> > >   drivers/media/dvb/ttpci/av7110_ca.c             |    2 +-
> > >   drivers/media/dvb/ttpci/av7110_hw.c             |    2 +-
> > >   drivers/media/dvb/ttpci/av7110_v4l.c            |    2 +-
> > >   drivers/media/dvb/ttpci/budget-av.c             |    2 +-
> > >   drivers/media/dvb/ttpci/budget-ci.c             |    2 +-
> > >   drivers/media/dvb/ttpci/budget-core.c           |    2 +-
> > >   drivers/media/dvb/ttpci/budget-patch.c          |    2 +-
> > >   drivers/media/dvb/ttpci/budget.c                |    2 +-
> > >   drivers/media/radio/radio-maxiradio.c           |    2 +-
> > >   drivers/media/radio/radio-typhoon.c             |    2 --
> > >   drivers/media/video/Kconfig                     |    2 +-
> > >   drivers/media/video/cafe_ccic.c                 |    2 +-
> > >   drivers/media/video/cx18/cx18-cards.c           |    2 +-
> > >   drivers/media/video/cx23885/cx23885-417.c       |    2 +-
> > >   drivers/media/video/cx88/cx88-blackbird.c       |    2 +-
> > >   drivers/media/video/ivtv/ivtv-cards.c           |    2 +-
> > >   drivers/media/video/mxb.c                       |    2 +-
> > >   drivers/media/video/sn9c102/sn9c102_pas202bcb.c |    1 -
> > >   drivers/misc/Kconfig                            |    4 ++--
> > >   drivers/mtd/chips/cfi_cmdset_0002.c             |    4 ++--
> > >   drivers/mtd/devices/lart.c                      |    2 +-
> > >   drivers/mtd/ftl.c                               |    2 +-
> > >   drivers/mtd/maps/Kconfig                        |    4 ++--
> > >   drivers/mtd/nand/cafe_nand.c                    |    2 +-
> > >   drivers/net/Kconfig                             |   21
> > > ++++++++++-----------
> > >   drivers/net/appletalk/Kconfig                   |    2 +-
> > >   drivers/net/atp.c                               |    2 +-
> > >   drivers/net/epic100.c                           |    4 ++--
> > >   drivers/net/hamradio/Kconfig                    |    2 +-
> > >   drivers/net/ibmlana.c                           |    2 +-
> > >   drivers/net/irda/donauboe.h                     |    2 +-
> > >   drivers/net/pci-skeleton.c                      |    2 +-
> > >   drivers/net/pcmcia/3c574_cs.c                   |    2 +-
> > >   drivers/net/sc92031.c                           |    2 +-
> > >   drivers/net/tlan.c                              |    2 +-
> > >   drivers/net/tokenring/tms380tr.c                |    2 +-
> > >   drivers/net/tulip/Kconfig                       |    2 +-
> > >   drivers/net/usb/plusb.c                         |    2 +-
> > >   drivers/net/wan/Kconfig                         |    2 +-
> > >   drivers/net/wireless/ath/ath5k/ath5k.h          |    2 +-
> > >   drivers/net/wireless/ath/ath5k/reg.h            |    1 -
> > >   drivers/net/wireless/p54/Kconfig                |    6 +++---
> > >   drivers/net/wireless/prism54/islpci_hotplug.c   |    2 +-
> > >   drivers/parisc/README.dino                      |    3 +--
> > >   drivers/pci/quirks.c                            |    3 ++-
> > >   drivers/pcmcia/yenta_socket.c                   |    2 +-
> > >   drivers/pnp/pnpbios/proc.c                      |    1 -
> > >   drivers/scsi/Kconfig                            |    9 +++++----
> > >   drivers/serial/8250.c                           |    2 +-
> > >   drivers/serial/bfin_sport_uart.c                |    2 +-
> > >   drivers/serial/bfin_sport_uart.h                |    2 +-
> > >   drivers/serial/uartlite.c                       |    2 +-
> > >   drivers/staging/asus_oled/README                |    2 +-
> > >   drivers/staging/asus_oled/asus_oled.c           |    2 +-
> > >   drivers/staging/comedi/drivers/cb_pcimdas.c     |    2 +-
> > >   drivers/staging/comedi/drivers/daqboard2000.c   |    4 ++--
> > >   drivers/staging/comedi/drivers/ni_labpc.c       |    2 +-
> > >   drivers/staging/comedi/drivers/ni_mio_common.c  |    2 +-
> > >   drivers/staging/comedi/drivers/plx9080.h        |    2 +-
> > >   drivers/staging/comedi/drivers/rtd520.c         |    2 +-
> > >   drivers/staging/quickstart/quickstart.c         |    3 +--
> > >   drivers/uio/Kconfig                             |    6 +++---
> > >   drivers/usb/serial/Kconfig                      |    4 ++--
> > >   drivers/usb/serial/ftdi_sio_ids.h               |   12 ++++++------
> > >   drivers/usb/serial/keyspan.c                    |    2 +-
> > >   drivers/usb/serial/keyspan.h                    |    2 +-
> > >   drivers/usb/serial/mct_u232.h                   |    9 ++++-----
> > >   drivers/usb/storage/Kconfig                     |    2 +-
> > >   drivers/video/Kconfig                           |   10 +++++-----
> > >   drivers/video/arcfb.c                           |    1 -
> > >   drivers/video/epson1355fb.c                     |    2 +-
> > >   drivers/video/fbcvt.c                           |    2 +-
> > >   drivers/video/hecubafb.c                        |    2 +-
> > >   drivers/video/metronomefb.c                     |    2 +-
> > >   firmware/keyspan_pda/keyspan_pda.S              |    2 +-
> > >   firmware/keyspan_pda/xircom_pgs.S               |    2 +-
> > >   fs/hostfs/hostfs.h                              |    7 +------
> > >   fs/partitions/ldm.c                             |    2 +-
> > >   fs/partitions/ldm.h                             |    2 +-
> > >   fs/reiserfs/Kconfig                             |    6 ++++--
> > >   fs/reiserfs/README                              |    2 +-
> > >   include/crypto/gf128mul.h                       |    4 ++--
> > >   include/linux/fdreg.h                           |    2 +-
> > >   include/linux/if_infiniband.h                   |    2 +-
> > >   include/linux/n_r3964.h                         |    1 -
> > >   net/ax25/Kconfig                                |    8 ++++----
> > >   net/ipv4/Kconfig                                |    4 ++--
> > >   net/ipv4/cipso_ipv4.c                           |    2 +-
> > >   net/ipv4/fib_trie.c                             |    2 +-
> > >   net/ipv4/netfilter/Kconfig                      |    2 +-
> > >   net/ipv4/tcp_illinois.c                         |    2 +-
> > >   net/ipv4/tcp_input.c                            |    4 ++--
> > >   net/ipv4/tcp_veno.c                             |    2 +-
> > >   net/netfilter/nf_conntrack_proto_tcp.c          |    4 ++--
> > >   sound/oss/ac97_codec.c                          |    7 ++-----
> > >   sound/pci/ens1370.c                             |    2 +-
> > >   sound/pci/intel8x0.c                            |    2 +-
> > >   135 files changed, 184 insertions(+), 209 deletions(-)
> > > 
> > > diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
> > > index bf88f71..aa0e0c5 100644
> > > --- a/drivers/ata/pata_it821x.c
> > > +++ b/drivers/ata/pata_it821x.c
> > > @@ -15,8 +15,8 @@
> > >    *  May be copied or modified under the terms of the GNU General Public
> > > License
> > >    *  Based in part on the ITE vendor provided SCSI driver.
> > >    *
> > > - *  Documentation available from
> > > - * 	http://www.ite.com.tw/pc/IT8212F_V04.pdf
> > > + *  Documentation available from IT8212F_V04.pdf
> > > + *
> > > http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
> > >    *  Some other documents are NDA.
> > >    *
> > >    *  The ITE8212 isn't exactly a standard IDE controller. It has two
> > > diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
> > > index be7461c..31c6010 100644
> > > --- a/drivers/atm/Kconfig
> > > +++ b/drivers/atm/Kconfig
> > > @@ -301,7 +301,7 @@ config ATM_IA
> > >   	  control memory (128K-1KVC, 512K-4KVC), the size of the packet
> > >   	  memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
> > >   	  UTP155, UTP25, DS3 and E3). Go to:
> > > -	  	<http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
> > > +	  	<http://www.iphase.com/>
> > >   	for more info about the cards. Say Y (or M to compile as a module
> > >   	  named iphase) here if you have one of these cards.
> > > 
> > > diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
> > > index 4b66c69..c8ad619 100644
> > > --- a/drivers/char/agp/Kconfig
> > > +++ b/drivers/char/agp/Kconfig
> > > @@ -34,7 +34,7 @@ config AGP_ALI
> > >   	  X on the following ALi chipsets.  The supported chipsets
> > >   	  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
> > >   	  For the ALi-chipset question, ALi suggests you refer to
> > > -	<http://www.ali.com.tw/eng/support/index.shtml>.
> > > +	<http://www.ali.com.tw/>.
> > > 
> > >   	  The M1541 chipset can do AGP 1x and 2x, but note that there is an
> > >   	  acknowledged incompatibility with Matrox G200 cards. Due to
> > > diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
> > > index e763d33..75b763c 100644
> > > --- a/drivers/char/agp/i460-agp.c
> > > +++ b/drivers/char/agp/i460-agp.c
> > > @@ -1,7 +1,7 @@
> > >   /*
> > >    * For documentation on the i460 AGP interface, see Chapter 7 (AGP
> > > Subsystem) of
> > >    * the "Intel 460GTX Chipset Software Developer's Manual":
> > > - * http://developer.intel.com/design/itanium/downloads/24870401s.htm
> > > + * http://www.intel.com/design/archives/itanium/downloads/248704.htm
> > >    */
> > >   /*
> > >    * 460GX support by Chris Ahna<christopher.j.ahna@xxxxxxxxx>
> > > diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
> > > index 033e150..0848ca9 100644
> > > --- a/drivers/char/apm-emulation.c
> > > +++ b/drivers/char/apm-emulation.c
> > > @@ -7,8 +7,8 @@
> > >    *   Intel Corporation, Microsoft Corporation. Advanced Power Management
> > >    *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
> > >    *
> > > - * [This document is available from Microsoft at:
> > > - *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
> > > + * This document is available from Microsoft at:
> > > + *    http://www.microsoft.com/whdc/archive/amp_12.mspx
> > >    */
> > >   #include<linux/module.h>
> > >   #include<linux/poll.h>
> > > diff --git a/drivers/char/ipmi/ipmi_bt_sm.c
> > > b/drivers/char/ipmi/ipmi_bt_sm.c
> > > index 7b98c06..3ed20e8 100644
> > > --- a/drivers/char/ipmi/ipmi_bt_sm.c
> > > +++ b/drivers/char/ipmi/ipmi_bt_sm.c
> > > @@ -2,7 +2,7 @@
> > >    *  ipmi_bt_sm.c
> > >    *
> > >    *  The state machine for an Open IPMI BT sub-driver under ipmi_si.c,
> > > part
> > > - *  of the driver architecture at http://sourceforge.net/project/openipmi
> > > + *  of the driver architecture at
> > > http://sourceforge.net/projects/openipmi
> > >    *
> > >    *  Author:	Rocky Craig<first.last@xxxxxx>
> > >    *
> > > diff --git a/drivers/char/ipmi/ipmi_si_intf.c
> > > b/drivers/char/ipmi/ipmi_si_intf.c
> > > index 7bd7c45..3e94c37 100644
> > > --- a/drivers/char/ipmi/ipmi_si_intf.c
> > > +++ b/drivers/char/ipmi/ipmi_si_intf.c
> > > @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
> > > 
> > >   /*
> > >    * Defined at
> > > - * http://h21007.www2.hp.com/portal/download/files
> > > - * /unprot/hpspmi.pdf
> > > + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
> > >    */
> > >   struct SPMITable {
> > >   	s8	Signature[4];
> > > diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
> > > index a98290d..88dda0c 100644
> > > --- a/drivers/char/n_r3964.c
> > > +++ b/drivers/char/n_r3964.c
> > > @@ -4,7 +4,6 @@
> > >    * Copyright by
> > >    * Philips Automation Projects
> > >    * Kassel (Germany)
> > > - * http://www.pap-philips.de
> > >    * -----------------------------------------------------------
> > >    * This software may be used and distributed according to the terms of
> > >    * the GNU General Public License, incorporated herein by reference.
> > > diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
> > > index ffa0efc..6614416 100644
> > > --- a/drivers/char/pcmcia/Kconfig
> > > +++ b/drivers/char/pcmcia/Kconfig
> > > @@ -28,7 +28,7 @@ config CARDMAN_4000
> > > 
> > >   	  This kernel driver requires additional userspace support, either
> > >   	  by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
> > > -	  or via the cm4000 backend of OpenCT (http://www.opensc.com/).
> > > +	  or via the cm4000 backend of OpenCT
> > > (http://www.opensc-project.org/opensc).
> > > 
> > >   config CARDMAN_4040
> > >   	tristate "Omnikey CardMan 4040 support"
> > > @@ -41,7 +41,7 @@ config CARDMAN_4040
> > >   	  in I/O space.  To use the kernel driver, you will need either the
> > >   	  PC/SC ifdhandler provided from the Omnikey homepage
> > >   	  (http://www.omnikey.com/), or a current development version of
> > > OpenCT
> > > -	  (http://www.opensc.org/).
> > > +	  (http://www.opensc-project.org/opensc).
> > > 
> > >   config IPWIRELESS
> > >   	tristate "IPWireless 3G UMTS PCMCIA card support"
> > > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> > > index 4dc338f..f6595ab 100644
> > > --- a/drivers/char/tpm/Kconfig
> > > +++ b/drivers/char/tpm/Kconfig
> > > @@ -58,6 +58,6 @@ config TCG_INFINEON
> > >   	  To compile this driver as a module, choose M here; the module
> > >   	  will be called tpm_infineon.
> > >   	  Further information on this driver and the supported hardware
> > > -	  can be found at http://www.prosec.rub.de/tpm
> > > +	  can be found at
> > > http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
> > > 
> > >   endif # TCG_TPM
> > > diff --git a/drivers/char/tpm/tpm_infineon.c
> > > b/drivers/char/tpm/tpm_infineon.c
> > > index f584407..76da32e 100644
> > > --- a/drivers/char/tpm/tpm_infineon.c
> > > +++ b/drivers/char/tpm/tpm_infineon.c
> > > @@ -7,7 +7,7 @@
> > >    * Copyright (C) 2005, Marcel Selhorst<m.selhorst@xxxxxxxxxx>
> > >    * Sirrix AG - security technologies, http://www.sirrix.com and
> > >    * Applied Data Security Group, Ruhr-University Bochum, Germany
> > > - * Project-Homepage: http://www.prosec.rub.de/tpm
> > > + * Project-Homepage:
> > > http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
> > >    *
> > >    * This program is free software; you can redistribute it and/or
> > >    * modify it under the terms of the GNU General Public License as
> > > diff --git a/drivers/edac/edac_device_sysfs.c
> > > b/drivers/edac/edac_device_sysfs.c
> > > index 0709681..413f0df 100644
> > > --- a/drivers/edac/edac_device_sysfs.c
> > > +++ b/drivers/edac/edac_device_sysfs.c
> > > @@ -1,7 +1,7 @@
> > >   /*
> > >    * file for managing the edac_device class of devices for EDAC
> > >    *
> > > - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
> > > + * (C) 2007 SoftwareBitMaker
> > >    *
> > >    * This file may be distributed under the terms of the
> > >    * GNU General Public License.
> > > diff --git a/drivers/edac/i82443bxgx_edac.c
> > > b/drivers/edac/i82443bxgx_edac.c
> > > index a2fa1fe..678405a 100644
> > > --- a/drivers/edac/i82443bxgx_edac.c
> > > +++ b/drivers/edac/i82443bxgx_edac.c
> > > @@ -12,7 +12,7 @@
> > >    * 440GX fix by Jason Uhlenkott<juhlenko@xxxxxxxxxx>.
> > >    *
> > >    * Written with reference to 82443BX Host Bridge Datasheet:
> > > - * http://www.intel.com/design/chipsets/440/documentation.htm
> > > + * http://download.intel.com/design/chipsets/datashts/29063301.pdf
> > >    * references to this document given in [].
> > >    *
> > >    * This module doesn't support the 440LX, but it may be possible to
> > > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> > > index 280c9b5..32e67a1 100644
> > > --- a/drivers/firmware/Kconfig
> > > +++ b/drivers/firmware/Kconfig
> > > @@ -73,8 +73,8 @@ config EFI_PCDP
> > >   	  on how the driver discovers devices.
> > > 
> > >   	  You must also enable the appropriate drivers (serial, VGA, etc.)
> > > -
> > > -	  See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
> > > +	  See DIG64_HCDPv20_042804.pdf available from
> > > +	<http://www.dig64.org/specifications/>
> > > 
> > >   config DELL_RBU
> > >   	tristate "BIOS update support for DELL systems via sysfs"
> > > diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
> > > index f287fe7..96c25d9 100644
> > > --- a/drivers/firmware/edd.c
> > > +++ b/drivers/firmware/edd.c
> > > @@ -15,7 +15,7 @@
> > >    * made in setup.S, copied to safe structures in setup.c,
> > >    * and presents it in sysfs.
> > >    *
> > > - * Please see http://linux.dell.com/edd30/results.html for
> > > + * Please see http://linux.dell.com/edd/results.html for
> > >    * the list of BIOSs which have been reported to implement EDD.
> > >    *
> > >    * This program is free software; you can redistribute it and/or modify
> > > diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
> > > index ce910d6..e098c6e 100644
> > > --- a/drivers/firmware/pcdp.h
> > > +++ b/drivers/firmware/pcdp.h
> > > @@ -1,8 +1,8 @@
> > >   /*
> > >    * Definitions for PCDP-defined console devices
> > >    *
> > > - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
> > > - * v2.0:  http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
> > > + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0
> > > resp.),
> > > + * please see<http://www.dig64.org/specifications/>
> > >    *
> > >    * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
> > >    *	Khalid Aziz<khalid.aziz@xxxxxx>
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 949326d..58e65f9 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
> > >    * according to the hdisplay, vdisplay, vrefresh.
> > >    * It is based from the VESA(TM) Coordinated Video Timing Generator by
> > >    * Graham Loveridge April 9, 2003 available at
> > > - * http://www.vesa.org/public/CVT/CVTd6r1.xls
> > > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> > >    *
> > >    * And it is copied from xf86CVTmode in
> > > xserver/hw/xfree86/modes/xf86cvt.c.
> > >    * What I have done is to translate it by using integer calculation.
> > > diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
> > > index 251b631..60befc0 100644
> > > --- a/drivers/hwmon/adm1025.c
> > > +++ b/drivers/hwmon/adm1025.c
> > > @@ -12,7 +12,7 @@
> > >    * resolution of about 0.5% of the nominal value). Temperature values
> > > are
> > >    * reported with a 1 deg resolution and a 3 deg accuracy. Complete
> > >    * datasheet can be obtained from Analog's website at:
> > > - *
> > > http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
> > > + *   http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025
> > >    *
> > >    * This driver also supports the ADM1025A, which differs from the
> > > ADM1025
> > >    * only in that it has "open-drain VID inputs while the ADM1025 has
> > > diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
> > > index 65335b2..4bf969c 100644
> > > --- a/drivers/hwmon/adm1026.c
> > > +++ b/drivers/hwmon/adm1026.c
> > > @@ -6,7 +6,7 @@
> > > 
> > >       Chip details at:
> > > 
> > > -<http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
> > > +<http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>
> > > 
> > >       This program is free software; you can redistribute it and/or modify
> > >       it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
> > > index 9638d58..95cbfb3 100644
> > > --- a/drivers/hwmon/f75375s.c
> > > +++ b/drivers/hwmon/f75375s.c
> > > @@ -6,10 +6,10 @@
> > >    * Datasheets available at:
> > >    *
> > >    * f75375:
> > > - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
> > > + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
> > >    *
> > >    * f75373:
> > > - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
> > > + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
> > >    *
> > >    * This program is free software; you can redistribute it and/or modify
> > >    * it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
> > > index 1f63d1a..1d6a6fa 100644
> > > --- a/drivers/hwmon/g760a.c
> > > +++ b/drivers/hwmon/g760a.c
> > > @@ -5,7 +5,7 @@
> > >       Copyright (C) 2007  Herbert Valerio Riedel<hvr@xxxxxxx>
> > > 
> > >       Complete datasheet is available at GMT's website:
> > > -      http://www.gmt.com.tw/datasheet/g760a.pdf
> > > +      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
> > > 
> > >       This program is free software; you can redistribute it and/or modify
> > >       it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
> > > index bf0862a..897702d 100644
> > > --- a/drivers/hwmon/hwmon-vid.c
> > > +++ b/drivers/hwmon/hwmon-vid.c
> > > @@ -38,7 +38,7 @@
> > >    * available at http://developer.intel.com/.
> > >    *
> > >    * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
> > > - *
> > > http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
> > > + *
> > > http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx
> > >    * Table 74. VID Code Voltages
> > >    * This corresponds to an arbitrary VRM code of 24 in the functions
> > > below.
> > >    * These CPU models (K8 revision<= E) have 5 VID pins. See also:
> > > diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
> > > index 4516369..97d98fb 100644
> > > --- a/drivers/ide/hpt366.c
> > > +++ b/drivers/ide/hpt366.c
> > > @@ -12,7 +12,7 @@
> > >    *
> > >    *
> > >    * HighPoint has its own drivers (open source except for the RAID part)
> > > - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
> > > + * available from
> > > http://www.highpoint-tech.com/USA_new/service_support.htm
> > >    * This may be useful to anyone wanting to work on this driver, however
> > > do not
> > >    * trust  them too much since the code tends to become less and less
> > > meaningful
> > >    * as the time passes... :-/
> > > diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
> > > index d81e496..808bcdc 100644
> > > --- a/drivers/ide/ht6560b.c
> > > +++ b/drivers/ide/ht6560b.c
> > > @@ -10,7 +10,6 @@
> > >    *  Author:    Mikko Ala-Fossi<maf@xxxxxx>
> > >    *             Jan Evert van Grootheest<j.e.van.grootheest@xxxxxxxxx>
> > >    *
> > > - *  Try:  http://www.maf.iki.fi/~maf/ht6560b/
> > >    */
> > > 
> > >   #define DRV_NAME	"ht6560b"
> > > diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
> > > index 89d70de..6e35ecc 100644
> > > --- a/drivers/infiniband/Kconfig
> > > +++ b/drivers/infiniband/Kconfig
> > > @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
> > >   	  Userspace InfiniBand Management Datagram (MAD) support.  This
> > >   	  is the kernel side of the userspace MAD support, which allows
> > >   	  userspace processes to send and receive MADs. You will also
> > > -	  need libibumad from<http://www.openib.org>.
> > > +	  need libibumad
> > > from<http://www.openfabrics.org/downloads/management/>.
> > > 
> > >   config INFINIBAND_USER_ACCESS
> > >   	tristate "InfiniBand userspace access (verbs and CM)"
> > > @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
> > >   	  to set up connections and directly access InfiniBand
> > >   	  hardware for fast-path operations.  You will also need
> > >   	  libibverbs, libibcm and a hardware driver library from
> > > -	<http://www.openib.org>.
> > > +	<http://www.openfabrics.org/git/>.
> > > 
> > >   config INFINIBAND_USER_MEM
> > >   	bool
> > > diff --git a/drivers/infiniband/hw/cxgb3/Kconfig
> > > b/drivers/infiniband/hw/cxgb3/Kconfig
> > > index 2acec3f..2b6352b 100644
> > > --- a/drivers/infiniband/hw/cxgb3/Kconfig
> > > +++ b/drivers/infiniband/hw/cxgb3/Kconfig
> > > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
> > >   	  our website at<http://www.chelsio.com>.
> > > 
> > >   	  For customer support, please visit our customer support page at
> > > -	<http://www.chelsio.com/support.htm>.
> > > +	<http://www.chelsio.com/support.html>.
> > > 
> > >   	  Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > diff --git a/drivers/infiniband/hw/cxgb4/Kconfig
> > > b/drivers/infiniband/hw/cxgb4/Kconfig
> > > index ccb85ea..6b7e6c5 100644
> > > --- a/drivers/infiniband/hw/cxgb4/Kconfig
> > > +++ b/drivers/infiniband/hw/cxgb4/Kconfig
> > > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
> > >   	  our website at<http://www.chelsio.com>.
> > > 
> > >   	  For customer support, please visit our customer support page at
> > > -	<http://www.chelsio.com/support.htm>.
> > > +	<http://www.chelsio.com/support.html>.
> > > 
> > >   	  Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > diff --git a/drivers/infiniband/ulp/iser/Kconfig
> > > b/drivers/infiniband/ulp/iser/Kconfig
> > > index b411c51..d00af71 100644
> > > --- a/drivers/infiniband/ulp/iser/Kconfig
> > > +++ b/drivers/infiniband/ulp/iser/Kconfig
> > > @@ -9,4 +9,4 @@ config INFINIBAND_ISER
> > > 
> > >   	  The iSER protocol is defined by IETF.
> > >   	  See<http://www.ietf.org/rfc/rfc5046.txt>
> > > -	  and<http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
> > > +	  and<http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
> > > diff --git a/drivers/input/joystick/gamecon.c
> > > b/drivers/input/joystick/gamecon.c
> > > index 0ffaf2c..e68e497 100644
> > > --- a/drivers/input/joystick/gamecon.c
> > > +++ b/drivers/input/joystick/gamecon.c
> > > @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)
> > >    * PSX support
> > >    *
> > >    * See documentation at:
> > > - *	http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
> > > + *	http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt	
> > >    *	http://www.gamesx.com/controldata/psxcont/psxcont.htm
> > > - *	ftp://milano.usal.es/pablo/
> > >    *
> > >    */
> > > 
> > > diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
> > > index 2b0eba6..b09c7d1 100644
> > > --- a/drivers/input/misc/cm109.c
> > > +++ b/drivers/input/misc/cm109.c
> > > @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)
> > > 
> > >   /*
> > >    * Keymap for ATCom AU-100
> > > - * http://www.atcom.cn/En_products_AU100.html
> > > + * http://www.atcom.cn/products.html
> > >    * http://www.packetizer.com/products/au100/
> > >    * http://www.voip-info.org/wiki/view/AU-100
> > >    *
> > > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> > > index c714ca2..bf5fd7f 100644
> > > --- a/drivers/input/mouse/Kconfig
> > > +++ b/drivers/input/mouse/Kconfig
> > > @@ -30,6 +30,7 @@ config MOUSE_PS2
> > >   		<http://w1.894.telia.com/~u89404340/touchpad/index.html>
> > >   	and a new version of GPM at:
> > >   		<http://www.geocities.com/dt_or/gpm/gpm.html>
> > > +		<http://xorg.freedesktop.org/archive/individual/driver/>
> > >   	to take advantage of the advanced features of the touchpad.
> > > 
> > >   	  If unsure, say Y.
> > > diff --git a/drivers/input/mouse/touchkit_ps2.c
> > > b/drivers/input/mouse/touchkit_ps2.c
> > > index 88121c5..1fd8f5e 100644
> > > --- a/drivers/input/mouse/touchkit_ps2.c
> > > +++ b/drivers/input/mouse/touchkit_ps2.c
> > > @@ -21,8 +21,8 @@
> > >    *
> > >    * Based upon touchkitusb.c
> > >    *
> > > - * Vendor documentation is available in support section of:
> > > - * http://www.egalax.com.tw/
> > > + * Vendor documentation is available at:
> > > + *
> > > http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf
> > >    */
> > > 
> > >   #include<linux/kernel.h>
> > > diff --git a/drivers/input/touchscreen/mk712.c
> > > b/drivers/input/touchscreen/mk712.c
> > > index efd3aeb..36e57de 100644
> > > --- a/drivers/input/touchscreen/mk712.c
> > > +++ b/drivers/input/touchscreen/mk712.c
> > > @@ -17,7 +17,7 @@
> > >    * found in Gateway AOL Connected Touchpad computers.
> > >    *
> > >    * Documentation for ICS MK712 can be found at:
> > > - *	http://www.icst.com/pdf/mk712.pdf
> > > + *	http://www.idt.com/products/getDoc.cfm?docID=18713923
> > >    */
> > > 
> > >   /*
> > > diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
> > > index 861bdf3..d501393 100644
> > > --- a/drivers/isdn/i4l/isdn_audio.c
> > > +++ b/drivers/isdn/i4l/isdn_audio.c
> > > @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt,
> > > unsigned char *in,
> > > 
> > >   /*
> > >    * Goertzel algorithm.
> > > - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
> > > + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/
> > >    * for more info.
> > >    * Result is stored into an sk_buff and queued up for later
> > >    * evaluation.
> > > diff --git a/drivers/macintosh/therm_adt746x.c
> > > b/drivers/macintosh/therm_adt746x.c
> > > index d0d2213..9e3e2c5 100644
> > > --- a/drivers/macintosh/therm_adt746x.c
> > > +++ b/drivers/macintosh/therm_adt746x.c
> > > @@ -3,9 +3,9 @@
> > >    *
> > >    * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin
> > > Herrenschmidt
> > >    *
> > > - * Documentation from
> > > - *
> > > http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
> > > - *
> > > http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
> > > + * Documentation from 115254175ADT7467_pra.pdf and
> > > 3686221171167ADT7460_b.pdf
> > > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
> > > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
> > >    *
> > >    */
> > > 
> > > diff --git a/drivers/media/IR/keymaps/rc-manli.c
> > > b/drivers/media/IR/keymaps/rc-manli.c
> > > index 1e9fbfa..0f590b3 100644
> > > --- a/drivers/media/IR/keymaps/rc-manli.c
> > > +++ b/drivers/media/IR/keymaps/rc-manli.c
> > > @@ -13,7 +13,6 @@
> > >   #include<media/rc-map.h>
> > > 
> > >   /* Michael Tokarev<mjt@xxxxxxxxxx>
> > > -   http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
> > >      keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
> > >      least, and probably other cards too.
> > >      The "ascii-art picture" below (in comments, first row
> > > diff --git a/drivers/media/dvb/ttpci/av7110.c
> > > b/drivers/media/dvb/ttpci/av7110.c
> > > index a6be529..87279d9 100644
> > > --- a/drivers/media/dvb/ttpci/av7110.c
> > > +++ b/drivers/media/dvb/ttpci/av7110.c
> > > @@ -26,7 +26,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > > 
> > > @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
> > >   /* Budgetpatch note:
> > >    * Original hardware design by Roberto Deza:
> > >    * There is a DVB_Wiki at
> > > - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
> > > - * where is described this 'DVB TT Budget Patch', on Card Modding:
> > > - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
> > > - * On the short description there is also a link to a external file,
> > > - * with more details:
> > > - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
> > > - *
> > > + * http://www.linuxtv.org/
> > >    * New software triggering design by Emard that works on
> > >    * original Roberto Deza's hardware:
> > >    *
> > > diff --git a/drivers/media/dvb/ttpci/av7110_av.c
> > > b/drivers/media/dvb/ttpci/av7110_av.c
> > > index 13efba9..878da6a 100644
> > > --- a/drivers/media/dvb/ttpci/av7110_av.c
> > > +++ b/drivers/media/dvb/ttpci/av7110_av.c
> > > @@ -25,7 +25,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include<linux/types.h>
> > > diff --git a/drivers/media/dvb/ttpci/av7110_ca.c
> > > b/drivers/media/dvb/ttpci/av7110_ca.c
> > > index 4eba35a..7564c26 100644
> > > --- a/drivers/media/dvb/ttpci/av7110_ca.c
> > > +++ b/drivers/media/dvb/ttpci/av7110_ca.c
> > > @@ -25,7 +25,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include<linux/kernel.h>
> > > diff --git a/drivers/media/dvb/ttpci/av7110_hw.c
> > > b/drivers/media/dvb/ttpci/av7110_hw.c
> > > index e162691..f1cbfe5 100644
> > > --- a/drivers/media/dvb/ttpci/av7110_hw.c
> > > +++ b/drivers/media/dvb/ttpci/av7110_hw.c
> > > @@ -22,7 +22,7 @@
> > >    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
> > > USA.
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   /* for debugging ARM communication: */
> > > diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c
> > > b/drivers/media/dvb/ttpci/av7110_v4l.c
> > > index 8986d96..ac20c5b 100644
> > > --- a/drivers/media/dvb/ttpci/av7110_v4l.c
> > > +++ b/drivers/media/dvb/ttpci/av7110_v4l.c
> > > @@ -22,7 +22,7 @@
> > >    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
> > > USA.
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include<linux/kernel.h>
> > > diff --git a/drivers/media/dvb/ttpci/budget-av.c
> > > b/drivers/media/dvb/ttpci/budget-av.c
> > > index 983672a..97afc01 100644
> > > --- a/drivers/media/dvb/ttpci/budget-av.c
> > > +++ b/drivers/media/dvb/ttpci/budget-av.c
> > > @@ -30,7 +30,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include "budget.h"
> > > diff --git a/drivers/media/dvb/ttpci/budget-ci.c
> > > b/drivers/media/dvb/ttpci/budget-ci.c
> > > index 13ac9e3..a9c2c32 100644
> > > --- a/drivers/media/dvb/ttpci/budget-ci.c
> > > +++ b/drivers/media/dvb/ttpci/budget-ci.c
> > > @@ -26,7 +26,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include<linux/module.h>
> > > diff --git a/drivers/media/dvb/ttpci/budget-core.c
> > > b/drivers/media/dvb/ttpci/budget-core.c
> > > index ba18e56..0546613 100644
> > > --- a/drivers/media/dvb/ttpci/budget-core.c
> > > +++ b/drivers/media/dvb/ttpci/budget-core.c
> > > @@ -31,7 +31,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > > 
> > > diff --git a/drivers/media/dvb/ttpci/budget-patch.c
> > > b/drivers/media/dvb/ttpci/budget-patch.c
> > > index 9c92f9d..5798355 100644
> > > --- a/drivers/media/dvb/ttpci/budget-patch.c
> > > +++ b/drivers/media/dvb/ttpci/budget-patch.c
> > > @@ -27,7 +27,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include "av7110.h"
> > > diff --git a/drivers/media/dvb/ttpci/budget.c
> > > b/drivers/media/dvb/ttpci/budget.c
> > > index 874a10a..d238fb9 100644
> > > --- a/drivers/media/dvb/ttpci/budget.c
> > > +++ b/drivers/media/dvb/ttpci/budget.c
> > > @@ -31,7 +31,7 @@
> > >    * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> > >    *
> > >    *
> > > - * the project's page is at http://www.linuxtv.org/dvb/
> > > + * the project's page is at http://www.linuxtv.org/
> > >    */
> > > 
> > >   #include "budget.h"
> > > diff --git a/drivers/media/radio/radio-maxiradio.c
> > > b/drivers/media/radio/radio-maxiradio.c
> > > index 4349213..255d40d 100644
> > > --- a/drivers/media/radio/radio-maxiradio.c
> > > +++ b/drivers/media/radio/radio-maxiradio.c
> > > @@ -13,7 +13,7 @@
> > >    * anybody does please mail me.
> > >    *
> > >    * For the pdf file see:
> > > - * http://www.semiconductors.philips.com/pip/TEA5757H/V1
> > > + *
> > > http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
> > >    *
> > >    *
> > >    * CHANGES:
> > > diff --git a/drivers/media/radio/radio-typhoon.c
> > > b/drivers/media/radio/radio-typhoon.c
> > > index 0343928..a5363ed 100644
> > > --- a/drivers/media/radio/radio-typhoon.c
> > > +++ b/drivers/media/radio/radio-typhoon.c
> > > @@ -1,8 +1,6 @@
> > >   /* Typhoon Radio Card driver for radio support
> > >    * (c) 1999 Dr. Henrik Seidel<Henrik.Seidel@xxxxxx>
> > >    *
> > > - * Card manufacturer:
> > > - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
> > >    *
> > >    * Notes on the hardware
> > >    *
> > > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> > > index f6e4d04..d000522 100644
> > > --- a/drivers/media/video/Kconfig
> > > +++ b/drivers/media/video/Kconfig
> > > @@ -978,7 +978,7 @@ config USB_STKWEBCAM
> > >   	  Supported devices are typically found in some Asus laptops,
> > >   	  with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
> > >   	  may be supported by the stk11xx driver, from which this is
> > > -	  derived, see http://stk11xx.sourceforge.net
> > > +	  derived, see<http://sourceforge.net/projects/syntekdriver/>
> > > 
> > >   	To compile this driver as a module, choose M here: the
> > >   	  module will be called stkwebcam.
> > > diff --git a/drivers/media/video/cafe_ccic.c
> > > b/drivers/media/video/cafe_ccic.c
> > > index be35e69..9536f1a 100644
> > > --- a/drivers/media/video/cafe_ccic.c
> > > +++ b/drivers/media/video/cafe_ccic.c
> > > @@ -4,7 +4,7 @@
> > >    * sensor.
> > >    *
> > >    * The data sheet for this device can be found at:
> > > - *    http://www.marvell.com/products/pcconn/88ALP01.jsp
> > > + *    http://www.marvell.com/products/pc_connectivity/88alp01/
> > >    *
> > >    * Copyright 2006 One Laptop Per Child Association, Inc.
> > >    * Copyright 2006-7 Jonathan Corbet<corbet@xxxxxxx>
> > > diff --git a/drivers/media/video/cx18/cx18-cards.c
> > > b/drivers/media/video/cx18/cx18-cards.c
> > > index 6b805af..fe10909 100644
> > > --- a/drivers/media/video/cx18/cx18-cards.c
> > > +++ b/drivers/media/video/cx18/cx18-cards.c
> > > @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
> > >   	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
> > >   };
> > > 
> > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
> > > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
> > >      This keeps the PCI ID database up to date. Note that the entries
> > >      must be added under vendor 0x4444 (Conexant) as subsystem IDs.
> > >      New vendor IDs should still be added to the vendor ID list. */
> > > diff --git a/drivers/media/video/cx23885/cx23885-417.c
> > > b/drivers/media/video/cx23885/cx23885-417.c
> > > index abd64e8..53a6782 100644
> > > --- a/drivers/media/video/cx23885/cx23885-417.c
> > > +++ b/drivers/media/video/cx23885/cx23885-417.c
> > > @@ -7,7 +7,7 @@
> > >    *    (c) 2008 Steven Toth<stoth@xxxxxxxxxxx>
> > >    *      - CX23885/7/8 support
> > >    *
> > > - *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> > > + *  Includes parts from the ivtv
> > > driver<http://sourceforge.net/projects/ivtv/>
> > >    *
> > >    *  This program is free software; you can redistribute it and/or modify
> > >    *  it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/media/video/cx88/cx88-blackbird.c
> > > b/drivers/media/video/cx88/cx88-blackbird.c
> > > index e46e1ce..660b2a9 100644
> > > --- a/drivers/media/video/cx88/cx88-blackbird.c
> > > +++ b/drivers/media/video/cx88/cx88-blackbird.c
> > > @@ -9,7 +9,7 @@
> > >    *    (c) 2005-2006 Mauro Carvalho Chehab<mchehab@xxxxxxxxxxxxx>
> > >    *        - video_ioctl2 conversion
> > >    *
> > > - *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> > > + *  Includes parts from the ivtv
> > > driver<http://sourceforge.net/projects/ivtv/>
> > >    *
> > >    *  This program is free software; you can redistribute it and/or modify
> > >    *  it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/media/video/ivtv/ivtv-cards.c
> > > b/drivers/media/video/ivtv/ivtv-cards.c
> > > index ca1fd32..87afbbe 100644
> > > --- a/drivers/media/video/ivtv/ivtv-cards.c
> > > +++ b/drivers/media/video/ivtv/ivtv-cards.c
> > > @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {
> > > 
> > >   /********************** card configuration
> > > *******************************/
> > > 
> > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
> > > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
> > >      This keeps the PCI ID database up to date. Note that the entries
> > >      must be added under vendor 0x4444 (Conexant) as subsystem IDs.
> > >      New vendor IDs should still be added to the vendor ID list. */
> > > diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
> > > index ef0c817..b1dbcf1 100644
> > > --- a/drivers/media/video/mxb.c
> > > +++ b/drivers/media/video/mxb.c
> > > @@ -3,7 +3,7 @@
> > > 
> > >       Copyright (C) 1998-2006 Michael Hunold<michael@xxxxxxx>
> > > 
> > > -    Visit http://www.mihu.de/linux/saa7146/mxb/
> > > +    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
> > >       for further details about this card.
> > > 
> > >       This program is free software; you can redistribute it and/or modify
> > > diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> > > b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> > > index 2782f94..2e86fdc 100644
> > > --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> > > +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> > > @@ -4,7 +4,6 @@
> > >    *
> > > *
> > >    * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio
> > > *
> > >    *<medaglia@xxxxxxxxxxx>                             *
> > > - *                       http://cadu.homelinux.com:8080/
> > > *
> > >    *
> > > *
> > >    * Support for SN9C103, DAC Magnitude, exposure and green gain controls
> > > *
> > >    * added by Luca Risolia<luca.risolia@xxxxxxxxxxxxxxx>
> > > *
> > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > > index b743312..3b28933 100644
> > > --- a/drivers/misc/Kconfig
> > > +++ b/drivers/misc/Kconfig
> > > @@ -112,8 +112,8 @@ config IBM_ASM
> > > 
> > >   	  WARNING: This software may not be supported or function
> > >   	  correctly on your IBM server. Please consult the IBM ServerProven
> > > -	  website<http://www.pc.ibm.com/ww/eserver/xseries/serverproven>  for
> > > -	  information on the specific driver level and support statement
> > > +
> > > website<http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
> > > +	  for information on the specific driver level and support statement
> > >   	  for your IBM server.
> > > 
> > >   config PHANTOM
> > > diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c
> > > b/drivers/mtd/chips/cfi_cmdset_0002.c
> > > index 3e6c47b..ba29d2f 100644
> > > --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> > > +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> > > @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map,
> > > int primary)
> > > 
> > >   			/*
> > >   			 * Valid primary extension versions are: 1.0, 1.1,
> > > 1.2, 1.3, 1.4
> > > -			 * see:
> > > http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf,
> > > page 19
> > > -			 *
> > > http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
> > > +			 * see:
> > > http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19
> > > +			 *
> > > http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
> > >   			 *
> > > http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
> > >   			 */
> > >   			if (extp->MajorVersion != '1' ||
> > > diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
> > > index f4359fe..caf6041 100644
> > > --- a/drivers/mtd/devices/lart.c
> > > +++ b/drivers/mtd/devices/lart.c
> > > @@ -17,7 +17,7 @@
> > >    *           - January 2000
> > >    *
> > >    *    [2] MTD internal API documentation
> > > - *           - http://www.linux-mtd.infradead.org/tech/
> > > + *           - http://www.linux-mtd.infradead.org/
> > >    *
> > >    * Limitations:
> > >    *
> > > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
> > > index 4d6a64c..037b399 100644
> > > --- a/drivers/mtd/ftl.c
> > > +++ b/drivers/mtd/ftl.c
> > > @@ -51,7 +51,7 @@
> > > 
> > >       Use of the FTL format for non-PCMCIA applications may be an
> > >       infringement of these patents.  For additional information,
> > > -    contact M-Systems (http://www.m-sys.com) directly.
> > > +    contact M-Systems directly. M-Systems since acquired by Sandisk.
> > > 
> > >   ======================================================================*/
> > >   #include<linux/mtd/blktrans.h>
> > > diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
> > > index 701d942..9622126 100644
> > > --- a/drivers/mtd/maps/Kconfig
> > > +++ b/drivers/mtd/maps/Kconfig
> > > @@ -172,7 +172,7 @@ config MTD_OCTAGON
> > >   	  This provides a 'mapping' driver which supports the way in which
> > >   	  the flash chips are connected in the Octagon-5066 Single Board
> > >   	  Computer. More information on the board is available at
> > > -	<http://www.octagonsystems.com/CPUpages/5066.html>.
> > > +	<http://www.octagonsystems.com/products/5066.aspx>.
> > > 
> > >   config MTD_VMAX
> > >   	tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
> > > @@ -284,7 +284,7 @@ config MTD_TQM8XXL
> > >   	  chips, currently uses AMD one. This 'mapping' driver supports
> > >   	  that arrangement, allowing the CFI probe and command set driver
> > >   	  code to communicate with the chips on the TQM8xxL board. More at
> > > -	<http://www.denx.de/embedded-ppc-en.html>.
> > > +	<http://www.denx.de/wiki/PPCEmbedded/>.
> > > 
> > >   config MTD_RPXLITE
> > >   	tristate "CFI Flash device mapped on RPX Lite or CLLF"
> > > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
> > > index db1dfc5..e06c898 100644
> > > --- a/drivers/mtd/nand/cafe_nand.c
> > > +++ b/drivers/mtd/nand/cafe_nand.c
> > > @@ -2,7 +2,7 @@
> > >    * Driver for One Laptop Per Child âCAFÃâ controller, aka Marvell
> > > 88ALP01
> > >    *
> > >    * The data sheet for this device can be found at:
> > > - *    http://www.marvell.com/products/pcconn/88ALP01.jsp
> > > + *    http://wiki.laptop.org/go/Datasheets
> > >    *
> > >    * Copyright  2006 Red Hat, Inc.
> > >    * Copyright  2006 David Woodhouse<dwmw2@xxxxxxxxxxxxx>
> > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> > > index 2cc81a5..5b66842 100644
> > > --- a/drivers/net/Kconfig
> > > +++ b/drivers/net/Kconfig
> > > @@ -921,7 +921,7 @@ config SMC91X
> > >   	  including the SMC91C94 and the SMC91C111. Say Y if you want it
> > >   	  compiled into the kernel, and read the file
> > >   	<file:Documentation/networking/smc9.txt>   and the Ethernet-HOWTO,
> > > -	  available from<http://www.linuxdoc.org/docs.html#howto>.
> > > +	  available from<http://www.tldp.org/docs.html#howto>.
> > > 
> > >   	  This driver is also available as a module ( = code which can be
> > >   	  inserted in and removed from the running kernel whenever you want).
> > > @@ -1031,7 +1031,7 @@ config SMC911X
> > >   	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> > >   	  Say Y if you want it compiled into the kernel,
> > >   	  and read the Ethernet-HOWTO, available from
> > > -	<http://www.linuxdoc.org/docs.html#howto>.
> > > +	<http://www.tldp.org/docs.html#howto>.
> > > 
> > >   	  This driver is also available as a module. The module will be
> > >   	  called smc911x.  If you want to compile it as a module, say M
> > > @@ -1513,7 +1513,7 @@ config E100
> > > 
> > >   	  For the latest Intel PRO/100 network driver for Linux, see:
> > > 
> > > -	<http://appsr.intel.com/scripts-df/support_intel.asp>
> > > +	<http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
> > > 
> > >   	More specific information on configuring the driver is in
> > >   	<file:Documentation/networking/e100.txt>.
> > > @@ -1539,9 +1539,8 @@ config FEALNX
> > >   	select CRC32
> > >   	select MII
> > >   	help
> > > -	  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> > > -	  cards. Specifications and data at
> > > -	<http://www.myson.com.hk/mtd/datasheet/>.
> > > +	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
> > > +	  cards.<http://www.myson.com.tw/>
> > > 
> > >   config NATSEMI
> > >   	tristate "National Semiconductor DP8381x series PCI Ethernet support"
> > > @@ -1715,7 +1714,7 @@ config SMSC9420
> > >   	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
> > >   	  Say Y if you want it compiled into the kernel,
> > >   	  and read the Ethernet-HOWTO, available from
> > > -	<http://www.linuxdoc.org/docs.html#howto>.
> > > +	<http://www.tldp.org/docs.html#howto>.
> > > 
> > >   	  This driver is also available as a module. The module will be
> > >   	  called smsc9420.  If you want to compile it as a module, say M
> > > @@ -2550,7 +2549,7 @@ config CHELSIO_T1
> > >             our website at<http://www.chelsio.com>.
> > > 
> > >             For customer support, please visit our customer support page
> > > at
> > > -<http://www.chelsio.com/support.htm>.
> > > +<http://www.chelsio.com/support.html>.
> > > 
> > >             Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > @@ -2582,7 +2581,7 @@ config CHELSIO_T3
> > >   	  our website at<http://www.chelsio.com>.
> > > 
> > >   	  For customer support, please visit our customer support page at
> > > -	<http://www.chelsio.com/support.htm>.
> > > +	<http://www.chelsio.com/support.html>.
> > > 
> > >   	  Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > @@ -2607,7 +2606,7 @@ config CHELSIO_T4
> > >   	  our website at<http://www.chelsio.com>.
> > > 
> > >   	  For customer support, please visit our customer support page at
> > > -	<http://www.chelsio.com/support.htm>.
> > > +	<http://www.chelsio.com/support.html>.
> > > 
> > >   	  Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF
> > >   	  our website at<http://www.chelsio.com>.
> > > 
> > >   	  For customer support, please visit our customer support page at
> > > -	<http://www.chelsio.com/support.htm>.
> > > +	<http://www.chelsio.com/support.html>.
> > > 
> > >   	  Please send feedback to<linux-bugs@xxxxxxxxxxx>.
> > > 
> > > diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
> > > index 0a0e0cd..f5a8916 100644
> > > --- a/drivers/net/appletalk/Kconfig
> > > +++ b/drivers/net/appletalk/Kconfig
> > > @@ -18,7 +18,7 @@ config ATALK
> > > 
> > >   	  General information about how to connect Linux, Windows machines and
> > >   	  Macs is on the WWW at<http://www.eats.com/linux_mac_win.html>.  The
> > > -	  NET-3-HOWTO, available from
> > > +	  NET3-4-HOWTO, available from
> > >   	<http://www.tldp.org/docs.html#howto>, contains valuable
> > >   	  information as well.
> > > 
> > > diff --git a/drivers/net/atp.c b/drivers/net/atp.c
> > > index bd2f9d3..0eee044 100644
> > > --- a/drivers/net/atp.c
> > > +++ b/drivers/net/atp.c
> > > @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; 			/* The
> > > data transfer mode. */
> > > 
> > >   	In 1997 Realtek made available the documentation for the second
> > > generation
> > >   	RTL8012 chip, which has lead to several driver improvements.
> > > -	  http://www.realtek.com.tw/cn/cn.html
> > > +	  http://www.realtek.com.tw/
> > > 
> > >   					Theory of Operation
> > > 
> > > diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
> > > index 57c8ac0..c6e2571 100644
> > > --- a/drivers/net/epic100.c
> > > +++ b/drivers/net/epic100.c
> > > @@ -131,8 +131,8 @@ IIIa. Ring buffers
> > > 
> > >   IVb. References
> > > 
> > > -http://www.smsc.com/main/tools/discontinued/83c171.pdf
> > > -http://www.smsc.com/main/tools/discontinued/83c175.pdf
> > > +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
> > > +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
> > >   http://scyld.com/expert/NWay.html
> > >   http://www.national.com/pf/DP/DP83840A.html
> > > 
> > > diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
> > > index 62d5d5c..95dbcfd 100644
> > > --- a/drivers/net/hamradio/Kconfig
> > > +++ b/drivers/net/hamradio/Kconfig
> > > @@ -73,7 +73,7 @@ config DMASCC
> > >   	  certain parameters, such as channel access timing, clock mode, and
> > >   	  DMA channel. This is accomplished with a small utility program,
> > >   	  dmascc_cfg, available at
> > > -	<http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
> > > +	<http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
> > >   	  get at least version 1.27 of dmascc_cfg, as older versions will not
> > >   	  work with the current driver.
> > > 
> > > diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
> > > index 294ccfb..8de3273 100644
> > > --- a/drivers/net/ibmlana.c
> > > +++ b/drivers/net/ibmlana.c
> > > @@ -23,7 +23,7 @@ paper sources:
> > >     'LAN Technical Reference Ethernet Adapter Interface Version 1 Release
> > > 1.0
> > >      Document Number SC30-3661-00' by IBM for info on the adapter itself
> > > 
> > > -  Also see http://www.natsemi.com/
> > > +  Also see http://www.national.com/analog
> > > 
> > >   special acknowledgements to:
> > >     - Bob Eager for helping me out with documentation from IBM
> > > diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
> > > index 36c3060..4dc39e5 100644
> > > --- a/drivers/net/irda/donauboe.h
> > > +++ b/drivers/net/irda/donauboe.h
> > > @@ -54,7 +54,7 @@
> > >   /* anyone who has. HOWEVER the chip bears a striking resemblence */
> > >   /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
> > >   /* the documentation for this is freely available at             */
> > > -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
> > > +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
> > >   /* The mapping between the registers in that document and the    */
> > >   /* Registers in the 701 oboe chip are as follows    */
> > > 
> > > diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
> > > index 56f3fc4..627b619 100644
> > > --- a/drivers/net/pci-skeleton.c
> > > +++ b/drivers/net/pci-skeleton.c
> > > @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an
> > > alignment buffer.
> > > 
> > >   IVb. References
> > > 
> > > -http://www.realtek.com.tw/cn/cn.html
> > > +http://www.realtek.com.tw/
> > >   http://www.scyld.com/expert/NWay.html
> > > 
> > >   IVc. Errata
> > > diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
> > > index c683f77..e092679 100644
> > > --- a/drivers/net/pcmcia/3c574_cs.c
> > > +++ b/drivers/net/pcmcia/3c574_cs.c
> > > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
> > >   V. References
> > > 
> > >   http://www.scyld.com/expert/NWay.html
> > > -http://www.national.com/pf/DP/DP83840.html
> > > +http://www.national.com/opf/DP/DP83840A.html
> > > 
> > >   Thanks to Terry Murphy of 3Com for providing development information for
> > >   earlier 3Com products.
> > > diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
> > > index 8c4067a..12fb560 100644
> > > --- a/drivers/net/sc92031.c
> > > +++ b/drivers/net/sc92031.c
> > > @@ -15,7 +15,7 @@
> > >    *  Rewritten for 2.6 by Cesar Eduardo Barros
> > >    *
> > >    *  A datasheet for this chip can be found at
> > > - *  http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
> > > + *  http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf
> > >    */
> > > 
> > >   /* Note about set_mac_address: I don't know how to change the hardware
> > > diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
> > > index ccee3ed..ef000b2 100644
> > > --- a/drivers/net/tlan.c
> > > +++ b/drivers/net/tlan.c
> > > @@ -78,7 +78,7 @@
> > >    * 			     - Updated tlan.txt accordingly.
> > >    * 			     - Adjusted minimum/maximum frame length.
> > >    * 			     - There is now a TLAN website up at
> > > - * 			       http://tlan.kernel.dk
> > > + * 			       http://hp.sourceforge.net/
> > >    *
> > >    * 	v1.7 April 07, 2000  - Started to implement custom ioctls.
> > > Driver now
> > >    * 			       reports PHY information when used with
> > > Donald
> > > diff --git a/drivers/net/tokenring/tms380tr.c
> > > b/drivers/net/tokenring/tms380tr.c
> > > index 435ef7d..ccc16d6 100644
> > > --- a/drivers/net/tokenring/tms380tr.c
> > > +++ b/drivers/net/tokenring/tms380tr.c
> > > @@ -5,7 +5,7 @@
> > >    *  Originally sktr.c: Written 1997 by Christoph Goos
> > >    *
> > >    *  A fine result of the Linux Systems Network Architecture Project.
> > > - *  http://www.linux-sna.org
> > > + *  http://www.vanheusden.com/sna/
> > >    *
> > >    *  This software may be used and distributed according to the terms
> > >    *  of the GNU General Public License, incorporated herein by reference.
> > > diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
> > > index 516713f..14c02e1 100644
> > > --- a/drivers/net/tulip/Kconfig
> > > +++ b/drivers/net/tulip/Kconfig
> > > @@ -151,7 +151,7 @@ config ULI526X
> > >   	select CRC32
> > >   	---help---
> > >   	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
> > > -	  (<http://www.uli.com.tw/>).
> > > +	  (<http://www.nvidia.com/page/uli_drivers.html>).
> > > 
> > >   	  To compile this driver as a module, choose M here. The module will
> > >   	  be called uli526x.
> > > diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
> > > index 08555f8..08ad269 100644
> > > --- a/drivers/net/usb/plusb.c
> > > +++ b/drivers/net/usb/plusb.c
> > > @@ -32,7 +32,7 @@
> > > 
> > > 
> > >   /*
> > > - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
> > > + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
> > >    *
> > >    * The protocol and handshaking used here should be bug-compatible
> > >    * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
> > > diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
> > > index d08ce6a..423eb26 100644
> > > --- a/drivers/net/wan/Kconfig
> > > +++ b/drivers/net/wan/Kconfig
> > > @@ -409,7 +409,7 @@ config CYCLADES_SYNC
> > >   	tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
> > >   	depends on WAN_ROUTER_DRIVERS&&  (PCI || ISA)
> > >   	---help---
> > > -	  Cyclom 2X from Cyclades Corporation<http://www.cyclades.com/>  is an
> > > +	  Cyclom 2X from Cyclades Corporation<http://www.avocent.com/>  is an
> > >   	  intelligent multiprotocol WAN adapter with data transfer rates up to
> > >   	  512 Kbps. These cards support the X.25 and SNA related protocols.
> > > 
> > > diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h
> > > b/drivers/net/wireless/ath/ath5k/ath5k.h
> > > index ea6362a..97659a0 100644
> > > --- a/drivers/net/wireless/ath/ath5k/ath5k.h
> > > +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
> > > @@ -351,7 +351,7 @@ struct ath5k_srev_name {
> > >   /*
> > >    * Some of this information is based on Documentation from:
> > >    *
> > > - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
> > > + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
> > >    *
> > >    * Modulation for Atheros' eXtended Range - range enhancing extension
> > > that is
> > >    * supposed to double the distance an Atheros client device can keep a
> > > diff --git a/drivers/net/wireless/ath/ath5k/reg.h
> > > b/drivers/net/wireless/ath/ath5k/reg.h
> > > index 55b4ac6..69a9b34 100644
> > > --- a/drivers/net/wireless/ath/ath5k/reg.h
> > > +++ b/drivers/net/wireless/ath/ath5k/reg.h
> > > @@ -26,7 +26,6 @@
> > >    * Atheros presentations and papers like these:
> > >    *
> > >    * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
> > > - *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
> > >    *
> > >    * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
> > >    *
> > > diff --git a/drivers/net/wireless/p54/Kconfig
> > > b/drivers/net/wireless/p54/Kconfig
> > > index b0342a5..8e82379 100644
> > > --- a/drivers/net/wireless/p54/Kconfig
> > > +++ b/drivers/net/wireless/p54/Kconfig
> > > @@ -8,7 +8,7 @@ config P54_COMMON
> > >   	  also need to be enabled in order to support any devices.
> > > 
> > >   	  These devices require softmac firmware which can be found at
> > > -	  http://prism54.org/
> > > +	<http://wireless.kernel.org/en/users/Drivers/p54>
> > > 
> > >   	If you choose to build a module, it'll be called p54common.
> > > 
> > > @@ -20,7 +20,7 @@ config P54_USB
> > >   	  This driver is for USB isl38xx based wireless cards.
> > > 
> > >   	  These devices require softmac firmware which can be found at
> > > -	  http://prism54.org/
> > > +	<http://wireless.kernel.org/en/users/Drivers/p54>
> > > 
> > >   	If you choose to build a module, it'll be called p54usb.
> > > 
> > > @@ -34,7 +34,7 @@ config P54_PCI
> > >   	  supported by the fullmac driver/firmware.
> > > 
> > >   	  This driver requires softmac firmware which can be found at
> > > -	  http://prism54.org/
> > > +	<http://wireless.kernel.org/en/users/Drivers/p54>
> > > 
> > >   	If you choose to build a module, it'll be called p54pci.
> > > 
> > > diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c
> > > b/drivers/net/wireless/prism54/islpci_hotplug.c
> > > index dc14420..b5e64d7 100644
> > > --- a/drivers/net/wireless/prism54/islpci_hotplug.c
> > > +++ b/drivers/net/wireless/prism54/islpci_hotplug.c
> > > @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
> > >   /* In this order: vendor, device, subvendor, subdevice, class,
> > > class_mask,
> > >    * driver_data
> > >    * If you have an update for this please contact
> > > prism54-devel@xxxxxxxxxxx
> > > - * The latest list can be found at http://prism54.org/supported_cards.php
> > > */
> > > + * The latest list can be found at
> > > http://wireless.kernel.org/en/users/Drivers/p54 */
> > >   static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
> > >   	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
> > >   	{
> > > diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
> > > index 097324f..1627426 100644
> > > --- a/drivers/parisc/README.dino
> > > +++ b/drivers/parisc/README.dino
> > > @@ -10,8 +10,7 @@
> > >   ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
> > >   ** not affected."
> > >   **
> > > -** REVISIT: "go/pci_defect" link below is stale.
> > > -**	HP Internal can use<http://hpfcdma.fc.hp.com:80/Dino/>
> > > +**
> > > http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
> > >   **
> > >   **	Product		First Good Serial Number
> > >   **  C200/C240 (US)	US67350000
> > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > > index 89ed181..dcc333f 100644
> > > --- a/drivers/pci/quirks.c
> > > +++ b/drivers/pci/quirks.c
> > > @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,
> > > PCI_DEVICE_ID_INTEL_82439TX, 	quir
> > >    *	VIA Apollo KT133 needs PCI latency patch
> > >    *	Made according to a windows driver based patch by George E.
> > > Breese
> > >    *	see PCI Latency Adjust on
> > > http://www.viahardware.com/download/viatweak.shtm
> > > + *	and http://www.georgebreese.com/net/software/#PCI
> > >    *      Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
> > >    *      the info on which Mr Breese based his work.
> > >    *
> > > @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,	0x605,
> > > quirk_transparent_bridge)
> > >   /*
> > >    * Common misconfiguration of the MediaGX/Geode PCI master that will
> > >    * reduce PCI bandwidth from 70MB/s to 25MB/s.  See the GXM/GXLV/GX1
> > > - * datasheets found at http://www.national.com/ds/GX for info on what
> > > + * datasheets found at http://www.national.com/analog for info on what
> > >    * these bits do.<christer@xxxxxxxxxxx>
> > >    */
> > >   static void quirk_mediagx_master(struct pci_dev *dev)
> > > diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
> > > index 414d9a6..91a7225 100644
> > > --- a/drivers/pcmcia/yenta_socket.c
> > > +++ b/drivers/pcmcia/yenta_socket.c
> > > @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket
> > > *socket)
> > >    * invisible during PCI scans because of a misconfigured subordinate
> > > number
> > >    * of the parent brige - some BIOSes seem to be too lazy to set it
> > > right.
> > >    * Does the fixup carefully by checking how far it can go without
> > > conflicts.
> > > - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more
> > > information.
> > > + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more
> > > information.
> > >    */
> > >   static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
> > >   {
> > > diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
> > > index 2d8ac43..bc89f39 100644
> > > --- a/drivers/pnp/pnpbios/proc.c
> > > +++ b/drivers/pnp/pnpbios/proc.c
> > > @@ -11,7 +11,6 @@
> > >    *
> > >    * The .../escd file is utilized by the lsescd utility written by
> > >    * Gunther Mayer.
> > > - *     http://home.t-online.de/home/gunther.mayer/lsescd
> > >    *
> > >    * The .../legacy_device_resources file is not used yet.
> > >    *
> > > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> > > index bbf91ae..03453d4 100644
> > > --- a/drivers/scsi/Kconfig
> > > +++ b/drivers/scsi/Kconfig
> > > @@ -116,7 +116,7 @@ config CHR_DEV_OSST
> > >   	<http://www.tldp.org/docs.html#howto>   and
> > >   	<file:Documentation/scsi/osst.txt>   in the kernel source.
> > >   	  More info on the OnStream driver may be found on
> > > -	<http://linux1.onstream.nl/test/>
> > > +	<http://sourceforge.net/projects/osst/>
> > >   	Please also have a look at the standard st docu, as most of it
> > >   	  applies to osst as well.
> > > 
> > > @@ -156,9 +156,9 @@ config CHR_DEV_SG
> > >   	  directly, so you need some additional software which knows how to
> > >   	  talk to these devices using the SCSI protocol:
> > > 
> > > -	  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
> > > +	  For scanners, look at SANE (<http://www.sane-project.org/>). For CD
> > >   	  writer software look at Cdrtools
> > > -
> > > (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
> > > +	  (<http://cdrecord.berlios.de/private/cdrecord.html>)
> > >   	  and for burning a "disk at once": CDRDAO
> > >   	  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
> > >   	  quality digital reader of audio CDs
> > > (<http://www.xiph.org/paranoia/>).
> > > @@ -950,6 +950,7 @@ config SCSI_IPS
> > >   	---help---
> > >   	  This is support for the IBM ServeRAID hardware RAID controllers.
> > >   	  See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
> > > +
> > > and<http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
> > >   	for more information.  If this driver does not work correctly
> > >   	  without modification please contact the author by email at
> > >   	<ipslinux@xxxxxxxxxxx>.
> > > @@ -1609,7 +1610,7 @@ config SCSI_DEBUG
> > >   	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
> > >   	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
> > >   	  dummy disks are simulated, they share the same kernel RAM for
> > > -	  their storage. See<http://www.torque.net/sg/sdebug.html>  for more
> > > +	  their storage. See<http://sg.danny.cz/sg/sdebug26.html>  for more
> > >   	  information. This driver is primarily of use to those testing the
> > >   	  SCSI and block subsystems. If unsure, say N.
> > > 
> > > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> > > index 24110f6..131c95f 100644
> > > --- a/drivers/serial/8250.c
> > > +++ b/drivers/serial/8250.c
> > > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
> > >   	/*
> > >   	 * Exar ST16C2550 "A2" devices incorrectly detect as
> > >   	 * having an EFR, and report an ID of 0x0201.  See
> > > -	 * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
> > > +	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
> > >   	 */
> > >   	if (autoconfig_read_divisor_id(up) == 0x0201&&  size_fifo(up) == 16)
> > >   		return 1;
> > > diff --git a/drivers/serial/bfin_sport_uart.c
> > > b/drivers/serial/bfin_sport_uart.c
> > > index 5318dd3..feb62a8 100644
> > > --- a/drivers/serial/bfin_sport_uart.c
> > > +++ b/drivers/serial/bfin_sport_uart.c
> > > @@ -10,7 +10,7 @@
> > > 
> > >   /*
> > >    * This driver and the hardware supported are in term of EE-191 of ADI.
> > > - *
> > > http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
> > > + *
> > > http://www.analog.com/static/imported-files/application_notes/EE191.pdf
> > >    * This application note describe how to implement a UART on a Sharc
> > > DSP,
> > >    * but this driver is implemented on Blackfin Processor.
> > >    * Transmit Frame Sync is not used by this driver to transfer data out.
> > > diff --git a/drivers/serial/bfin_sport_uart.h
> > > b/drivers/serial/bfin_sport_uart.h
> > > index 9ce253e..6d06ce1 100644
> > > --- a/drivers/serial/bfin_sport_uart.h
> > > +++ b/drivers/serial/bfin_sport_uart.h
> > > @@ -10,7 +10,7 @@
> > > 
> > >   /*
> > >    * This driver and the hardware supported are in term of EE-191 of ADI.
> > > - *
> > > http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
> > > + *
> > > http://www.analog.com/static/imported-files/application_notes/EE191.pdf
> > >    * This application note describe how to implement a UART on a Sharc
> > > DSP,
> > >    * but this driver is implemented on Blackfin Processor.
> > >    * Transmit Frame Sync is not used by this driver to transfer data out.
> > > diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
> > > index 9b03d7b..3fa2e16 100644
> > > --- a/drivers/serial/uartlite.c
> > > +++ b/drivers/serial/uartlite.c
> > > @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
> > >    * Register definitions
> > >    *
> > >    * For register details see datasheet:
> > > - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
> > > + *
> > > http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
> > >    */
> > > 
> > >   #define ULITE_RX		0x00
> > > diff --git a/drivers/staging/asus_oled/README
> > > b/drivers/staging/asus_oled/README
> > > index 96b9717..0d82a6d 100644
> > > --- a/drivers/staging/asus_oled/README
> > > +++ b/drivers/staging/asus_oled/README
> > > @@ -2,7 +2,7 @@
> > >       Driver for Asus OLED display present in some Asus laptops.
> > > 
> > >       The code of this driver is based on 'asusoled' program taken from
> > > -    https://launchpad.net/asusoled/. I just wanted to have a simple
> > > +<http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple
> > >       kernel driver for controlling this device, but I didn't know how
> > >       to do that. Now I know ;) Also, that program can not be used
> > >       with usbhid loaded, which means no USB mouse/keyboard while
> > > diff --git a/drivers/staging/asus_oled/asus_oled.c
> > > b/drivers/staging/asus_oled/asus_oled.c
> > > index 5b279fb..8c95d8c 100644
> > > --- a/drivers/staging/asus_oled/asus_oled.c
> > > +++ b/drivers/staging/asus_oled/asus_oled.c
> > > @@ -24,7 +24,7 @@
> > >    *
> > >    *
> > >    *  Asus OLED support is based on asusoled program taken from
> > > - *  https://launchpad.net/asusoled/.
> > > + *<http://lapsus.berlios.de/asus_oled.html>.
> > >    *
> > >    *
> > >    */
> > > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c
> > > b/drivers/staging/comedi/drivers/cb_pcimdas.c
> > > index ced346a..78b1410 100644
> > > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
> > > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
> > > @@ -37,7 +37,7 @@ Configuration Options:
> > >   Developed from cb_pcidas and skel by Richard Bytheway
> > > (mocelet@xxxxxxxx).
> > >   Only supports DIO, AO and simple AI in it's present form.
> > >   No interrupts, multi channel or FIFO AI, although the card looks like it
> > > could support this.
> > > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf
> > > for more details.
> > > +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more
> > > details.
> > >   */
> > > 
> > >   #include "../comedidev.h"
> > > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c
> > > b/drivers/staging/comedi/drivers/daqboard2000.c
> > > index 6af6c83..82be77d 100644
> > > --- a/drivers/staging/comedi/drivers/daqboard2000.c
> > > +++ b/drivers/staging/comedi/drivers/daqboard2000.c
> > > @@ -50,8 +50,8 @@ Configuration options:
> > >      With some help from our swedish distributor, we got the Windows
> > > sourcecode
> > >      for the card, and here are the findings so far.
> > > 
> > > -   1. A good document that describes the PCI interface chip is found at:
> > > -      http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
> > > +   1. A good document that describes the PCI interface chip is
> > > 9080db-106.pdf
> > > +      available from http://www.plxtech.com/products/io/pci9080
> > > 
> > >      2. The initialization done so far is:
> > >           a. program the FPGA (windows code sans a lot of error messages)
> > > diff --git a/drivers/staging/comedi/drivers/ni_labpc.c
> > > b/drivers/staging/comedi/drivers/ni_labpc.c
> > > index 3acf7e6..1411dd8 100644
> > > --- a/drivers/staging/comedi/drivers/ni_labpc.c
> > > +++ b/drivers/staging/comedi/drivers/ni_labpc.c
> > > @@ -37,7 +37,7 @@ boards has not
> > >   yet been added to the driver, mainly due to the fact that
> > >   I don't know the device id numbers.  If you have one
> > >   of these boards,
> > > -please file a bug report at https://bugs.comedi.org/
> > > +please file a bug report at http://comedi.org/
> > >   so I can get the necessary information from you.
> > > 
> > >   The 1200 series boards have onboard calibration dacs for correcting
> > > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
> > > b/drivers/staging/comedi/drivers/ni_mio_common.c
> > > index bd16f91..986ef67 100644
> > > --- a/drivers/staging/comedi/drivers/ni_mio_common.c
> > > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
> > > @@ -34,7 +34,7 @@
> > >   	   340747b.pdf  AT-MIO E series Register Level Programmer Manual
> > >   	   341079b.pdf  PCI E Series RLPM
> > >   	   340934b.pdf  DAQ-STC reference manual
> > > -	67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
> > > +	67xx and 611x registers (from
> > > ftp://ftp.ni.com/support/daq/mhddk/documentation/)
> > >   	release_ni611x.pdf
> > >   	release_ni67xx.pdf
> > >   	Other possibly relevant info:
> > > diff --git a/drivers/staging/comedi/drivers/plx9080.h
> > > b/drivers/staging/comedi/drivers/plx9080.h
> > > index 485d63f..0d254a1 100644
> > > --- a/drivers/staging/comedi/drivers/plx9080.h
> > > +++ b/drivers/staging/comedi/drivers/plx9080.h
> > > @@ -13,7 +13,7 @@
> > >    *
> > >    ********************************************************************
> > >    *
> > > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
> > > + * Copyright (C) 1999 RG Studio s.c.
> > >    * Written by Krzysztof Halasa<khc@xxxxxxxxxxxxxxx>
> > >    *
> > >    * Portions (C) SBE Inc., used by permission.
> > > diff --git a/drivers/staging/comedi/drivers/rtd520.c
> > > b/drivers/staging/comedi/drivers/rtd520.c
> > > index 0367d2b..a49a7c5 100644
> > > --- a/drivers/staging/comedi/drivers/rtd520.c
> > > +++ b/drivers/staging/comedi/drivers/rtd520.c
> > > @@ -59,7 +59,7 @@ Configuration options:
> > >       Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
> > >       Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
> > >       Call them and ask for the register level manual.
> > > -    PCI chip: http://www.plxtech.com/products/toolbox/9080.htm
> > > +    PCI chip: http://www.plxtech.com/products/io/pci9080
> > > 
> > >       Notes:
> > >       This board is memory mapped.  There is some IO stuff, but it isn't
> > > needed.
> > > diff --git a/drivers/staging/quickstart/quickstart.c
> > > b/drivers/staging/quickstart/quickstart.c
> > > index 6612247..ba8f670 100644
> > > --- a/drivers/staging/quickstart/quickstart.c
> > > +++ b/drivers/staging/quickstart/quickstart.c
> > > @@ -5,8 +5,7 @@
> > >    *  Copyright (C) 2007-2010 Angelo Arrifano<miknix@xxxxxxxxx>
> > >    *
> > >    *  Information gathered from disassebled dsdt and from here:
> > > - *  "http://download.microsoft.com/download/9/c/5/
> > > - *  9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
> > > +
> > > *<http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx>
> > >    *
> > >    *  This program is free software; you can redistribute it and/or modify
> > >    *  it under the terms of the GNU General Public License as published by
> > > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > > index 1da73ec..bb44079 100644
> > > --- a/drivers/uio/Kconfig
> > > +++ b/drivers/uio/Kconfig
> > > @@ -17,9 +17,9 @@ config UIO_CIF
> > >   	depends on PCI
> > >   	help
> > >   	  Driver for Hilscher CIF DeviceNet and Profibus cards.  This
> > > -	  driver requires a userspace component that handles all of the
> > > -	  heavy lifting and can be found at:
> > > -	  	http://www.osadl.org/projects/downloads/UIO/user/cif-*
> > > +  	  driver requires a userspace component called cif that handles
> > > +	  all of the heavy lifting and can be found at:
> > > +	<http://www.osadl.org/projects/downloads/UIO/user/>
> > > 
> > >   	To compile this driver as a module, choose M here: the module
> > >   	  will be called uio_cif.
> > > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
> > > index 916b2b6..b71e309 100644
> > > --- a/drivers/usb/serial/Kconfig
> > > +++ b/drivers/usb/serial/Kconfig
> > > @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR
> > >   	help
> > >   	  Say Y here if you want to connect to your HandSpring Visor, Palm
> > >   	  m500 or m505 through its USB docking station. See
> > > -	<http://usbvisor.sourceforge.net/>  for more information on using this
> > > +	<http://usbvisor.sourceforge.net/index.php3>  for more information on
> > > using this
> > >   	  driver.
> > > 
> > >   	  To compile this driver as a module, choose M here: the
> > > @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN
> > >   	  and was developed with their support.  You must also include
> > >   	  firmware to support your particular device(s).
> > > 
> > > -	  See<http://misc.nu/hugh/keyspan.html>  for more information.
> > > +	  See<http://blemings.org/hugh/keyspan.html>  for more information.
> > > 
> > >   	  To compile this driver as a module, choose M here: the
> > >   	  module will be called keyspan.
> > > diff --git a/drivers/usb/serial/ftdi_sio_ids.h
> > > b/drivers/usb/serial/ftdi_sio_ids.h
> > > index 15a4583..28c640d 100644
> > > --- a/drivers/usb/serial/ftdi_sio_ids.h
> > > +++ b/drivers/usb/serial/ftdi_sio_ids.h
> > > @@ -46,7 +46,7 @@
> > >   #define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG
> > > lines */
> > > 
> > >   /* OOCDlink by Joern Kaipf<joernk@xxxxxx>
> > > - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink)
> > > */
> > > + * (http://www.joernonline.de/) */
> > >   #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
> > > 
> > >   /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
> > > @@ -335,7 +335,7 @@
> > >   #define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
> > > 
> > >   /* ACT Solutions HomePro ZWave interface
> > > -   (http://www.act-solutions.com/HomePro.htm) */
> > > +   (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
> > >   #define FTDI_ACTZWAVE_PID	0xF2D0
> > > 
> > >   /*
> > > @@ -366,7 +366,7 @@
> > >   #define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
> > > 
> > >   /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM
> > > chip */
> > > -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
> > > +/* http://www.usbuirt.com/ */
> > >   #define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
> > > 
> > >   /* CCS Inc. ICDU/ICDU40 product ID -
> > > @@ -395,7 +395,7 @@
> > >    */
> > >   #define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
> > > 
> > > -/* Inside Accesso contactless reader (http://www.insidefr.com) */
> > > +/* Inside Accesso contactless reader (http://www.insidecontactless.com/)
> > > */
> > >   #define INSIDE_ACCESSO		0xFAD0
> > > 
> > >   /*
> > > @@ -634,14 +634,14 @@
> > > 
> > >   /*
> > >    * JETI SPECTROMETER SPECBOS 1201
> > > - * http://www.jeti.com/products/sys/scb/scb1201.php
> > > + *
> > > http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
> > >    */
> > >   #define JETI_VID		0x0c6c
> > >   #define JETI_SPC1201_PID	0x04b2
> > > 
> > >   /*
> > >    * FTDI USB UART chips used in construction projects from the
> > > - * Elektor Electronics magazine (http://elektor-electronics.co.uk)
> > > + * Elektor Electronics magazine (http://www.elektor.com/)
> > >    */
> > >   #define ELEKTOR_VID		0x0C7D
> > >   #define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006
> > > */
> > > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
> > > index 297163c..0791778 100644
> > > --- a/drivers/usb/serial/keyspan.c
> > > +++ b/drivers/usb/serial/keyspan.c
> > > @@ -9,7 +9,7 @@
> > >     the Free Software Foundation; either version 2 of the License, or
> > >     (at your option) any later version.
> > > 
> > > -  See http://misc.nu/hugh/keyspan.html for more information.
> > > +  See http://blemings.org/hugh/keyspan.html for more information.
> > > 
> > >     Code in this driver inspired by and in a number of places taken
> > >     from Brian Warner's original Keyspan-PDA driver.
> > > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
> > > index bf3297d..2d8baf6 100644
> > > --- a/drivers/usb/serial/keyspan.h
> > > +++ b/drivers/usb/serial/keyspan.h
> > > @@ -9,7 +9,7 @@
> > >     the Free Software Foundation; either version 2 of the License, or
> > >     (at your option) any later version.
> > > 
> > > -  See http://misc.nu/hugh/keyspan.html for more information.
> > > +  See http://blemings.org/hugh/keyspan.html for more information.
> > > 
> > >     Code in this driver inspired by and in a number of places taken
> > >     from Brian Warner's original Keyspan-PDA driver.
> > > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> > > index 3a3f5e6..d325bb8 100644
> > > --- a/drivers/usb/serial/mct_u232.h
> > > +++ b/drivers/usb/serial/mct_u232.h
> > > @@ -10,10 +10,9 @@
> > >    *
> > >    * This driver is for the device MCT USB-RS232 Converter (25 pin, Model
> > > No.
> > >    * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
> > > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
> > > - * information. The properties of this device are listed at the end of
> > > this
> > > - * file. This device is available from various distributors. I know Hana,
> > > - * http://www.hana.de and D-Link,
> > > http://www.dlink.com/products/usb/dsbs25.
> > > + * Model No. U232-P9). See
> > > http://www.mct.com.tw/products/product_us232.html
> > > + * for further information. The properties of this device are listed at
> > > the end
> > > + * of this file. This device was used in the Dlink DSB-S25.
> > >    *
> > >    * All of the information about the device was acquired by using
> > > SniffUSB
> > >    * on Windows98. The technical details of the reverse engineering are
> > > @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct
> > > usb_serial *serial,
> > >    * embedded UART.  Exhaustive documentation for these is available at:
> > >    *
> > >    *   http://www.semiconductors.philips.com/pip/p87c52ubaa
> > > - *   http://www.semiconductors.philips.com/pip/pdiusbd12
> > > + *
> > > http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
> > >    *
> > >    * Thanks to Julian Highfield for the pointer to the Philips database.
> > >    *
> > > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
> > > index 8a372ba..b356e15 100644
> > > --- a/drivers/usb/storage/Kconfig
> > > +++ b/drivers/usb/storage/Kconfig
> > > @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
> > >   	depends on USB_STORAGE
> > >   	help
> > >   	  Support for certain Datafab CompactFlash readers.
> > > -	  Datafab has a web page at<http://www.datafabusa.com/>.
> > > +	  Datafab has a web page at<http://www.datafab.com/>.
> > > 
> > >   	  If this driver is compiled as a module, it will be named
> > > ums-datafab.
> > > 
> > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > > index 8b31fdf..dc06ff1 100644
> > > --- a/drivers/video/Kconfig
> > > +++ b/drivers/video/Kconfig
> > > @@ -49,7 +49,7 @@ menuconfig FB
> > >   	  You need an utility program called fbset to make full use of frame
> > >   	  buffer devices. Please read<file:Documentation/fb/framebuffer.txt>
> > >   	and the Framebuffer-HOWTO at
> > > -	<http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html>  for
> > > more
> > > +	<http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html>  for
> > > more
> > >   	  information.
> > > 
> > >   	  Say Y here and to the driver for your graphics board below if you
> > > @@ -955,7 +955,7 @@ config FB_EPSON1355
> > >   	  Build in support for the SED1355 Epson Research Embedded RAMDAC
> > >   	  LCD/CRT Controller (since redesignated as the S1D13505) as a
> > >   	  framebuffer.  Product specs at
> > > -	<http://www.erd.epson.com/vdc/html/products.htm>.
> > > +	<http://vdc.epson.com/>.
> > > 
> > >   config FB_S1D13XXX
> > >   	tristate "Epson S1D13XXX framebuffer support"
> > > @@ -966,7 +966,7 @@ config FB_S1D13XXX
> > >   	help
> > >   	  Support for S1D13XXX framebuffer device family (currently only
> > >   	  working with S1D13806). Product specs at
> > > -	<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
> > > +	<http://vdc.epson.com/>
> > > 
> > >   config FB_ATMEL
> > >   	tristate "AT91/AT32 LCD Controller support"
> > > @@ -1323,7 +1323,7 @@ config FB_RADEON
> > >   	  don't need to choose this to run the Radeon in plain VGA mode.
> > > 
> > >   	  There is a product page at
> > > -	  http://apps.ati.com/ATIcompare/
> > > +	  http://products.amd.com/en-us/GraphicCardResult.aspx
> > > 
> > >   config FB_RADEON_I2C
> > >   	bool "DDC/I2C for ATI Radeon support"
> > > @@ -1395,7 +1395,7 @@ config FB_ATY_CT
> > >   	  Say Y here to support use of ATI's 64-bit Rage boards (or other
> > >   	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> > >   	  framebuffer device.  The ATI product support page for these boards
> > > -	  is at<http://support.ati.com/products/pc/mach64/>.
> > > +	  is at<http://support.ati.com/products/pc/mach64/mach64.html>.
> > > 
> > >   config FB_ATY_GENERIC_LCD
> > >   	bool "Mach64 generic LCD support (EXPERIMENTAL)"
> > > diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
> > > index f3d7440..3ec4923 100644
> > > --- a/drivers/video/arcfb.c
> > > +++ b/drivers/video/arcfb.c
> > > @@ -2,7 +2,6 @@
> > >    * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
> > >    *
> > >    * Copyright (C) 2005, Jaya Kumar<jayalk@xxxxxxxxxxxx>
> > > - * http://www.intworks.biz/arclcd
> > >    *
> > >    * This file is subject to the terms and conditions of the GNU General
> > > Public
> > >    * License. See the file COPYING in the main directory of this archive
> > > for
> > > diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
> > > index db9713b..a268cbf 100644
> > > --- a/drivers/video/epson1355fb.c
> > > +++ b/drivers/video/epson1355fb.c
> > > @@ -4,7 +4,7 @@
> > >    * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
> > >    *   (previously known as SED1355)
> > >    *
> > > - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
> > > + * Cf. http://vdc.epson.com/
> > >    *
> > >    *
> > >    * Copyright (C) Hewlett-Packard Company.  All rights reserved.
> > > diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
> > > index 7293eac..7cb715d 100644
> > > --- a/drivers/video/fbcvt.c
> > > +++ b/drivers/video/fbcvt.c
> > > @@ -5,7 +5,7 @@
> > >    *
> > >    *      Based from the VESA(TM) Coordinated Video Timing Generator by
> > >    *      Graham Loveridge April 9, 2003 available at
> > > - *      http://www.vesa.org/public/CVT/CVTd6r1.xls
> > > + *      http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> > >    *
> > >    * This file is subject to the terms and conditions of the GNU General
> > > Public
> > >    * License.  See the file COPYING in the main directory of this archive
> > > diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
> > > index c77bcc6..e225c00 100644
> > > --- a/drivers/video/hecubafb.c
> > > +++ b/drivers/video/hecubafb.c
> > > @@ -10,7 +10,7 @@
> > >    *
> > >    * Layout is based on skeletonfb.c by James Simmons and Geert
> > > Uytterhoeven.
> > >    * This work was possible because of apollo display code from E-Ink's
> > > website
> > > - * http://support.eink.com/community
> > > + * http://eink.com/
> > >    * All information used to write this code is from public material made
> > >    * available by E-Ink on its support site. Some commands such as 0xA4
> > >    * were found by looping through cmd=0x00 thru 0xFF and supplying random
> > > diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
> > > index 9b3d6e4..63ed3b7 100644
> > > --- a/drivers/video/metronomefb.c
> > > +++ b/drivers/video/metronomefb.c
> > > @@ -10,7 +10,7 @@
> > >    * Layout is based on skeletonfb.c by James Simmons and Geert
> > > Uytterhoeven.
> > >    *
> > >    * This work was made possible by help and equipment support from E-Ink
> > > - * Corporation. http://support.eink.com/community
> > > + * Corporation. http://www.eink.com/
> > >    *
> > >    * This driver is written to be used with the Metronome display
> > > controller.
> > >    * It is intended to be architecture independent. A board specific
> > > driver
> > > diff --git a/firmware/keyspan_pda/keyspan_pda.S
> > > b/firmware/keyspan_pda/keyspan_pda.S
> > > index 418fe69..f3acc19 100644
> > > --- a/firmware/keyspan_pda/keyspan_pda.S
> > > +++ b/firmware/keyspan_pda/keyspan_pda.S
> > > @@ -74,7 +74,7 @@
> > >    *  recognizes the new device ID and glues it to the real serial driver
> > > code.
> > >    *
> > >    * USEFUL DOCS:
> > > - *  EzUSB Technical Reference Manual:<http://www.anchorchips.com>
> > > + *  EzUSB Technical Reference Manual:<http://www.cypress.com/>
> > >    *  8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB
> > > is
> > >    *   basically the Dallas enhanced 8051 code. Remember that the EzUSB IO
> > > ports
> > >    *   use totally different registers!
> > > diff --git a/firmware/keyspan_pda/xircom_pgs.S
> > > b/firmware/keyspan_pda/xircom_pgs.S
> > > index 05d99dd..0b79bbf 100644
> > > --- a/firmware/keyspan_pda/xircom_pgs.S
> > > +++ b/firmware/keyspan_pda/xircom_pgs.S
> > > @@ -74,7 +74,7 @@
> > >    *  recognizes the new device ID and glues it to the real serial driver
> > > code.
> > >    *
> > >    * USEFUL DOCS:
> > > - *  EzUSB Technical Reference Manual:<http://www.anchorchips.com>
> > > + *  EzUSB Technical Reference Manual:<http://www.cypress.com/>
> > >    *  8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB
> > > is
> > >    *   basically the Dallas enhanced 8051 code. Remember that the EzUSB IO
> > > ports
> > >    *   use totally different registers!
> > > diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
> > > index 6bbd75c..7c232c1 100644
> > > --- a/fs/hostfs/hostfs.h
> > > +++ b/fs/hostfs/hostfs.h
> > > @@ -28,12 +28,7 @@
> > >    * #define ATTR_KILL_SUID	2048
> > >    * #define ATTR_KILL_SGID	4096
> > >    *
> > > - * and this is because they were added in 2.5 development in this patch:
> > > - *
> > > - * http://linux.bkbits.net:8080/linux-2.5/
> > > - * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html
> > > - * |src/.|src/include|src/include/linux|related/include/linux/fs.h
> > > - *
> > > + * and this is because they were added in 2.5 development.
> > >    * Actually, they are not needed by most ->setattr() methods - they are
> > > set by
> > >    * callers of notify_change() to notify that the setuid/setgid bits must
> > > be
> > >    * dropped.
> > > diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
> > > index 5bf8a04..789c625 100644
> > > --- a/fs/partitions/ldm.c
> > > +++ b/fs/partitions/ldm.c
> > > @@ -5,7 +5,7 @@
> > >    * Copyright (c) 2001-2007 Anton Altaparmakov
> > >    * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi@xxxxxxxxx>
> > >    *
> > > - * Documentation is available at
> > > http://www.linux-ntfs.org/content/view/19/37/
> > > + * Documentation is available at
> > > http://www.linux-ntfs.org/doku.php?id=downloads
> > >    *
> > >    * This program is free software; you can redistribute it and/or modify
> > > it under
> > >    * the terms of the GNU General Public License as published by the Free
> > > Software
> > > diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
> > > index d1fb50b..374242c 100644
> > > --- a/fs/partitions/ldm.h
> > > +++ b/fs/partitions/ldm.h
> > > @@ -5,7 +5,7 @@
> > >    * Copyright (c) 2001-2007 Anton Altaparmakov
> > >    * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi@xxxxxxxxx>
> > >    *
> > > - * Documentation is available at
> > > http://www.linux-ntfs.org/content/view/19/37/
> > > + * Documentation is available at
> > > http://www.linux-ntfs.org/doku.php?id=downloads
> > >    *
> > >    * This program is free software; you can redistribute it and/or modify
> > > it
> > >    * under the terms of the GNU General Public License as published by the
> > > Free
> > > diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
> > > index 513f431..7cd4666 100644
> > > --- a/fs/reiserfs/Kconfig
> > > +++ b/fs/reiserfs/Kconfig
> > > @@ -10,7 +10,8 @@ config REISERFS_FS
> > > 
> > >   	  In general, ReiserFS is as fast as ext2, but is very efficient with
> > >   	  large directories and small files.  Additional patches are needed
> > > -	  for NFS and quotas, please see<http://www.namesys.com/>  for links.
> > > +	  for NFS and quotas, please see
> > > +	<https://reiser4.wiki.kernel.org/index.php/Main_Page>  for links.
> > > 
> > >   	  It is more easily extended to have features currently found in
> > >   	  database and keyword search systems than block allocation based file
> > > @@ -18,7 +19,8 @@ config REISERFS_FS
> > >   	  plugins consistent with our motto ``It takes more than a license to
> > >   	  make source code open.''
> > > 
> > > -	  Read<http://www.namesys.com/>  to learn more about reiserfs.
> > > +	  Read<https://reiser4.wiki.kernel.org/index.php/Main_Page>
> > > +	  to learn more about reiserfs.
> > > 
> > >   	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
> > > 
> > > diff --git a/fs/reiserfs/README b/fs/reiserfs/README
> > > index 14e8c9d..e2f7a26 100644
> > > --- a/fs/reiserfs/README
> > > +++ b/fs/reiserfs/README
> > > @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL
> > > version.)
> > >   [END LICENSING]
> > > 
> > >   Reiserfs is a file system based on balanced tree algorithms, which is
> > > -described at http://devlinux.com/namesys.
> > > +described at https://reiser4.wiki.kernel.org/index.php/Main_Page
> > > 
> > >   Stop reading here.  Go there, then return.
> > > 
> > > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
> > > index 4086b8e..da2530e 100644
> > > --- a/include/crypto/gf128mul.h
> > > +++ b/include/crypto/gf128mul.h
> > > @@ -54,8 +54,8 @@
> > > 
> > >   /* Comment by Rik:
> > >    *
> > > - * For some background on GF(2^128) see for example: http://-
> > > - *
> > > csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
> > > + * For some background on GF(2^128) see for example:
> > > + *
> > > http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
> > >    *
> > >    * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
> > >    * be mapped to computer memory in a variety of ways. Let's examine
> > > diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
> > > index c2eeb63..61ce641 100644
> > > --- a/include/linux/fdreg.h
> > > +++ b/include/linux/fdreg.h
> > > @@ -89,7 +89,7 @@
> > >   /* the following commands are new in the 82078. They are not used in the
> > >    * floppy driver, except the first three. These commands may be useful
> > > for apps
> > >    * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets
> > > at
> > > - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
> > > + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
> > > 
> > >   #define FD_PARTID		0x18	/* part id ("extended" version cmd) */
> > >   #define FD_SAVE			0x2e	/* save fdc regs for later
> > > restore */
> > > diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
> > > index 3e659ec..7d95847 100644
> > > --- a/include/linux/if_infiniband.h
> > > +++ b/include/linux/if_infiniband.h
> > > @@ -5,7 +5,7 @@
> > >    *<http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
> > >    * license, available in the LICENSE.TXT file accompanying this
> > >    * software.  These details are also available at
> > > - *<http://openib.org/license.html>.
> > > + *<http://www.openfabrics.org/software_license.htm>.
> > >    *
> > >    * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > >    * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
> > > index de24af7..54b8e0d 100644
> > > --- a/include/linux/n_r3964.h
> > > +++ b/include/linux/n_r3964.h
> > > @@ -4,7 +4,6 @@
> > >    * Copyright by
> > >    * Philips Automation Projects
> > >    * Kassel (Germany)
> > > - * http://www.pap-philips.de
> > >    * -----------------------------------------------------------
> > >    * This software may be used and distributed according to the terms of
> > >    * the GNU General Public License, incorporated herein by reference.
> > > diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
> > > index 2a72aa9..705e53e 100644
> > > --- a/net/ax25/Kconfig
> > > +++ b/net/ax25/Kconfig
> > > @@ -7,7 +7,7 @@ menuconfig HAMRADIO
> > >   	bool "Amateur Radio support"
> > >   	help
> > >   	  If you want to connect your Linux box to an amateur radio, answer Y
> > > -	  here. You want to read<http://www.tapr.org/tapr/html/pkthome.html>
> > > +	  here. You want to read<http://www.tapr.org/>
> > >   	and more specifically about AX.25 on Linux
> > >   	<http://www.linux-ax25.org/>.
> > > 
> > > @@ -42,7 +42,7 @@ config AX25
> > >   	  check out the file<file:Documentation/networking/ax25.txt>  in the
> > >   	  kernel source. More information about digital amateur radio in
> > >   	  general is on the WWW at
> > > -	<http://www.tapr.org/tapr/html/pkthome.html>.
> > > +	<http://www.tapr.org/>.
> > > 
> > >   	  To compile this driver as a module, choose M here: the
> > >   	  module will be called ax25.
> > > @@ -89,7 +89,7 @@ config NETROM
> > >   	<http://www.linux-ax25.org>. You also might want to check out the
> > >   	  file<file:Documentation/networking/ax25.txt>. More information about
> > >   	  digital amateur radio in general is on the WWW at
> > > -	<http://www.tapr.org/tapr/html/pkthome.html>.
> > > +	<http://www.tapr.org/>.
> > > 
> > >   	  To compile this driver as a module, choose M here: the
> > >   	  module will be called netrom.
> > > @@ -108,7 +108,7 @@ config ROSE
> > >   	<http://www.linux-ax25.org>.  You also might want to check out the
> > >   	  file<file:Documentation/networking/ax25.txt>. More information about
> > >   	  digital amateur radio in general is on the WWW at
> > > -	<http://www.tapr.org/tapr/html/pkthome.html>.
> > > +	<http://www.tapr.org/>.
> > > 
> > >   	  To compile this driver as a module, choose M here: the
> > >   	  module will be called rose.
> > > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> > > index 571f895..4123d5b 100644
> > > --- a/net/ipv4/Kconfig
> > > +++ b/net/ipv4/Kconfig
> > > @@ -84,7 +84,7 @@ config IP_FIB_TRIE
> > > 
> > >   	  An experimental study of compression methods for dynamic tries
> > >   	  Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> > > -	  http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> > > +	<http://www.csc.kth.se/~snilsson/software/dyntrie2/>
> > > 
> > >   endchoice
> > > 
> > > @@ -555,7 +555,7 @@ config TCP_CONG_VENO
> > >   	distinguishing to circumvent the difficult judgment of the packet loss
> > >   	type. TCP Veno cuts down less congestion window in response to random
> > >   	loss packets.
> > > -	See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> > > +	See<http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
> > > 
> > >   config TCP_CONG_YEAH
> > >   	tristate "YeAH TCP"
> > > diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
> > > index 3a92a76..094e150 100644
> > > --- a/net/ipv4/cipso_ipv4.c
> > > +++ b/net/ipv4/cipso_ipv4.c
> > > @@ -9,7 +9,7 @@
> > >    *
> > >    * The CIPSO draft specification can be found in the kernel's
> > > Documentation
> > >    * directory as well as the following URL:
> > > - *
> > > http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
> > > + *   http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
> > >    * The FIPS-188 specification can be found at the following URL:
> > >    *   http://www.itl.nist.gov/fipspubs/fip188.htm
> > >    *
> > > diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
> > > index 4a8e370..d9818c5 100644
> > > --- a/net/ipv4/fib_trie.c
> > > +++ b/net/ipv4/fib_trie.c
> > > @@ -16,7 +16,7 @@
> > >    *
> > >    * An experimental study of compression methods for dynamic tries
> > >    * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> > > - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> > > + * http://www.csc.kth.se/~snilsson/software/dyntrie2/
> > >    *
> > >    *
> > >    * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
> > > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
> > > index 1833bdb..d048275 100644
> > > --- a/net/ipv4/netfilter/Kconfig
> > > +++ b/net/ipv4/netfilter/Kconfig
> > > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
> > >   	  which can only be viewed through syslog.
> > > 
> > >   	  The appropriate userspace logging daemon (ulogd) may be obtained
> > > from
> > > -	<http://www.gnumonks.org/projects/ulogd/>
> > > +	<http://www.netfilter.org/projects/ulogd/index.html>
> > > 
> > >   	To compile it as a module, choose M here.  If unsure, say N.
> > > 
> > > diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
> > > index 1eba160..00ca688 100644
> > > --- a/net/ipv4/tcp_illinois.c
> > > +++ b/net/ipv4/tcp_illinois.c
> > > @@ -6,7 +6,7 @@
> > >    * The algorithm is described in:
> > >    * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
> > >    *  for High-Speed Networks"
> > > - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf
> > > + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
> > >    *
> > >    * Implemented from description in paper and ns-2 simulation.
> > >    * Copyright (C) 2007 Stephen Hemminger<shemminger@xxxxxxxxxxxxxxxxxxxx>
> > > diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
> > > index e663b78..bccce34 100644
> > > --- a/net/ipv4/tcp_input.c
> > > +++ b/net/ipv4/tcp_input.c
> > > @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss);
> > >    *
> > >    * The algorithm for RTT estimation w/o timestamps is based on
> > >    * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
> > > - *<http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps>
> > > + *<http://public.lanl.gov/radiant/pubs.html#DRS>
> > >    *
> > >    * More detail on this code can be found at
> > > - *<http://www.psc.edu/~jheffner/senior_thesis.ps>,
> > > + *<http://staff.psc.edu/jheffner/>,
> > >    * though this reference is out of date.  A new paper
> > >    * is pending.
> > >    */
> > > diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
> > > index b612acf..38bc0b5 100644
> > > --- a/net/ipv4/tcp_veno.c
> > > +++ b/net/ipv4/tcp_veno.c
> > > @@ -6,7 +6,7 @@
> > >    *    "TCP Veno: TCP Enhancement for Transmission over Wireless Access
> > > Networks."
> > >    *    IEEE Journal on Selected Areas in Communication,
> > >    *    Feb. 2003.
> > > - * 	See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> > > + * 	See
> > > http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
> > >    */
> > > 
> > >   #include<linux/mm.h>
> > > diff --git a/net/netfilter/nf_conntrack_proto_tcp.c
> > > b/net/netfilter/nf_conntrack_proto_tcp.c
> > > index c4c885d..3fb2b73 100644
> > > --- a/net/netfilter/nf_conntrack_proto_tcp.c
> > > +++ b/net/netfilter/nf_conntrack_proto_tcp.c
> > > @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct
> > > tcphdr *tcph)
> > >   /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
> > >      in IP Filter' by Guido van Rooij.
> > > 
> > > -   http://www.nluug.nl/events/sane2000/papers.html
> > > -   http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz
> > > +   http://www.sane.nl/events/sane2000/papers.html
> > > +   http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
> > > 
> > >      The boundaries and the conditions are changed according to RFC793:
> > >      the packet must intersect the window (i.e. segments may be
> > > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
> > > index 456a1b4..854c303 100644
> > > --- a/sound/oss/ac97_codec.c
> > > +++ b/sound/oss/ac97_codec.c
> > > @@ -21,11 +21,8 @@
> > >    *
> > >    **************************************************************************
> > >    *
> > > - * The Intel Audio Codec '97 specification is available at the Intel
> > > - * audio homepage:
> > > http://developer.intel.com/ial/scalableplatforms/audio/
> > > - *
> > > - * The specification itself is currently available at:
> > > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
> > > + * The Intel Audio Codec '97 specification is available at:
> > > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
> > >    *
> > >    **************************************************************************
> > >    *
> > > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
> > > index c7fba53..537cfba 100644
> > > --- a/sound/pci/ens1370.c
> > > +++ b/sound/pci/ens1370.c
> > > @@ -22,7 +22,7 @@
> > >   /* Power-Management-Code ( CONFIG_PM )
> > >    * for ens1371 only ( FIXME )
> > >    * derived from cs4281.c, atiixp.c and via82xx.c
> > > - * using
> > > http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
> > > + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
> > >    * by Kurt J. Bosch
> > >    */
> > > 
> > > diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
> > > index 4677492..400f9eb 100644
> > > --- a/sound/pci/intel8x0.c
> > > +++ b/sound/pci/intel8x0.c
> > > @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0
> > > *chip, struct ichdev *ich
> > >    * Intel 82443MX running a 100MHz processor system bus has a hardware
> > > bug,
> > >    * which aborts PCI busmaster for audio transfer.  A workaround is to
> > > set
> > >    * the pages as non-cached.  For details, see the errata in
> > > - *	http://www.intel.com/design/chipsets/specupdt/245051.htm
> > > + *	http://download.intel.com/design/chipsets/specupdt/24505108.pdf
> > >    */
> > >   static void fill_nocache(void *buf, int size, int nocache)
> > >   {
> 
> 

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux