Search Linux Wireless

Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Sep 23, 2010 at 03:20:03AM -0500, Luciano Coelho wrote:
static struct mtd_partition omap3beagle_nand_partitions[] = {
@@ -163,12 +168,25 @@ static void __init beagle_display_init(void)

#include "sdram-micron-mt46h32m32lf-6.h"

+struct wl12xx_platform_data omap_beagle_wlan_data __initdata = {
+	.irq = OMAP_GPIO_IRQ(OMAP_BEAGLE_WLAN_IRQ_GPIO),

can you pass IRQ as a struct resource ?

+	.board_ref_clock = 2, /* 38.4 MHz */
+};
+
static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		.wires		= 8,
		.gpio_wp	= 29,
	},
+	{
+		.name           = "wl1271",
+		.mmc            = 2,
+		.wires          = 4,
+		.gpio_wp        = -EINVAL,
+		.gpio_cd        = -EINVAL,
+		.nonremovable   = true,
+	},
	{}	/* Terminator */
};

@@ -176,10 +194,43 @@ static struct regulator_consumer_supply beagle_vmmc1_supply = {
	.supply			= "vmmc",
};

+static struct regulator_consumer_supply beagle_vmmc2_supply = {
+	.supply         = "vmmc",
+	.dev_name       = "mmci-omap-hs.1",
+};

this should be:

static struct regulator_consume_supply beagle_vmmc2_supplies = {
	{
		.supply		= "vmmc",
		.dev_name	= "mmci-omap-hs.1",
	},
};

+static struct regulator_init_data beagle_vmmc2 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &beagle_vmmc2_supply,

please tabify, it's easier for reading, same for all below:

	constrants	= {
		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc2_supplies),
	.consumer_supplies	= beagle_vmmc2_supplies,

@@ -464,9 +528,14 @@ static struct omap_musb_board_data musb_board_data = {
static void __init omap3_beagle_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	if (wl12xx_set_platform_data(&omap_beagle_wlan_data))
+		pr_err("error setting wl12xx data\n");
+
	omap3_beagle_i2c_init();
	platform_add_devices(omap3_beagle_devices,
			ARRAY_SIZE(omap3_beagle_devices));
+	platform_device_register(&omap_vwlan_device);
+

trailing blank line. Also, you could just add omap_vwlan_device to
omap3_beagle_devices.

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 4134f44..8bb028e 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -60,7 +60,7 @@ enum {
	DEBUG_ALL	= ~0,
};

-#define DEBUG_LEVEL (DEBUG_NONE)
+#define DEBUG_LEVEL (DEBUG_MAC80211 | DEBUG_CMD | DEBUG_ACX | DEBUG_BOOT)

some debugging trash came into commit ??

--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux