> Also i got firmware 2.13.0.0.a.13.14.arm from linux-wireles. After > loading module with proper command line, I see message > > cx3110x spi1.0: firmware boot failed > > and no other error/warning message presents. SPI signals like good. > > > phy0: p54 detected a LM20 firmware > p54: rx_mtu reduced from 3240 to 2376 > phy0: FW rev 2.13.0.0.a.13.14 - Softmac protocol 5.6 > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > cx3110x spi1.0: loading user eeprom... Looks like you have custom eeprom image... > phy0: hwaddr 00:02:ee:c0:ff:ee, MAC:isl3820 RF:Longbc > x3110x spi1.0: firmware boot failed ...and this eeprom image has wrong format. > What's trouble? Incorrect firmware? Unsupported (so slow) SPI rate? > > I try load another firmware from 2.13... series - result: firmware > boot failed. I also try load firmware cutted from Sagrad source > (version 2.19....) result is same: firmware boot failed. > > What is my next step for this idea? I'd suggest removing file 3826.eeprom and trying to boot without it. -- Max -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
