Initialise wl_info::tasklet early so that it's safe to tasklet_kill()
it in wl_free().
Remove assertions from wl_free() that may not be true in case of
initialisation failure.
Call wl_release_fw() in case of failure after wl_request_fw().
Don't rely on wl_firmware::fw_cnt in wl_release_fw().
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
This is compile-tested only; I don't have any of the supported hardware
myself.
Ben.
drivers/staging/brcm80211/TODO | 1 -
drivers/staging/brcm80211/sys/wl_mac80211.c | 25 ++++++++++++-------------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index aa38d49..5870bca 100644
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -25,7 +25,6 @@ Bugs
- Various occasional asserts/hangs
- Scanning during data transfer sometimes causes major slowdowns. Sometimes
revcovers when scan is done, other times not.
-- Driver does not handle missing firmware gracefully.
- Mac80211 API not completely implemented (ie ops_bss_info_changed,
ops_get_stats, etc)
diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c
index d73ec44..3e0c450 100644
--- a/drivers/staging/brcm80211/sys/wl_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wl_mac80211.c
@@ -837,6 +837,9 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
wl->osh = osh;
atomic_set(&wl->callbacks, 0);
+ /* setup the bottom half handler */
+ tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl);
+
#ifdef WLC_HIGH_ONLY
wl->rpc_th = bcm_rpc_tp_attach(osh, NULL);
if (wl->rpc_th == NULL) {
@@ -905,17 +908,16 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
#endif
/* common load-time initialization */
- if (!
- (wl->wlc =
- wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh,
- wl->regsva, wl->bcm_bustype, btparam, &err))) {
+ wl->wlc = wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh,
+ wl->regsva, wl->bcm_bustype, btparam, &err);
+#ifndef WLC_HIGH_ONLY
+ wl_release_fw(wl);
+#endif
+ if (!wl->wlc) {
printf("%s: %s driver failed with code %d\n", KBUILD_MODNAME,
EPI_VERSION_STR, err);
goto fail;
}
-#ifndef WLC_HIGH_ONLY
- wl_release_fw(wl);
-#endif
wl->pub = wlc_pub(wl->wlc);
wl->pub->ieee_hw = hw;
@@ -942,9 +944,6 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
wlc_iovar_setint(wl->wlc, "sd_drivestrength", sd_drivestrength);
#endif
- /* setup the bottom half handler */
- tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl);
-
#ifdef WLC_LOW
/* register our interrupt handler */
if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
@@ -1710,11 +1709,9 @@ void wl_free(wl_info_t * wl)
ASSERT(wl);
#ifndef WLC_HIGH_ONLY
- ASSERT(wl->irq); /* bmac does not use direct interrupt */
/* free ucode data */
if (wl->fw.fw_cnt)
wl_ucode_data_free();
- ASSERT(wl->wlc);
if (wl->irq)
free_irq(wl->irq, wl);
#endif
@@ -2509,6 +2506,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev)
status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
if (status) {
printf("fail to request firmware %s\n", fw_name);
+ wl_release_fw(wl);
return status;
}
WL_NONE(("request fw %s\n", fw_name));
@@ -2517,6 +2515,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev)
status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
if (status) {
printf("fail to request firmware %s\n", fw_name);
+ wl_release_fw(wl);
return status;
}
wl->fw.hdr_num_entries[i] =
@@ -2539,7 +2538,7 @@ void wl_ucode_free_buf(void *p)
static void wl_release_fw(wl_info_t * wl)
{
int i;
- for (i = 0; i < wl->fw.fw_cnt; i++) {
+ for (i = 0; i < WL_MAX_FW; i++) {
release_firmware(wl->fw.fw_bin[i]);
release_firmware(wl->fw.fw_hdr[i]);
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
