Enable runtime PM for SDIO functions.
SDIO functions are initialized with a disabled runtime PM status,
and are set active (and their usage count is incremented)
only before potential drivers are probed.
SDIO function drivers that support runtime PM should call
pm_runtime_put_noidle() in their probe routine, and
pm_runtime_get_noresume() in their remove routine (very
similarly to PCI drivers).
In case a matching driver does not support runtime PM, power will
always be on (since the usage count is positive).
Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
---
drivers/mmc/core/sdio.c | 5 +++++
drivers/mmc/core/sdio_bus.c | 30 ++++++++++++++++++++++++++++--
2 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index a5a76a8..c4022da 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -732,6 +732,11 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
err = sdio_init_func(host->card, i + 1);
if (err)
goto remove;
+
+ /*
+ * Enable Runtime PM for this func
+ */
+ pm_runtime_enable(&card->sdio_func[i]->dev);
}
mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 256a968..d55a592 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -126,15 +126,34 @@ static int sdio_bus_probe(struct device *dev)
if (!id)
return -ENODEV;
+ /* Unbound SDIO functions are always suspended.
+ * During probe, the function is set active and the usage count
+ * is incremented. If the driver supports runtime PM,
+ * it should call pm_runtime_put_noidle() in its probe routine and
+ * pm_runtime_get_noresume() in its remove routine.
+ */
+ ret = pm_runtime_get_sync(dev);
+ if (ret)
+ goto out;
+
/* Set the default block size so the driver is sure it's something
* sensible. */
sdio_claim_host(func);
ret = sdio_set_block_size(func, 0);
sdio_release_host(func);
if (ret)
- return ret;
+ goto disable_runtimepm;
+
+ ret = drv->probe(func, id);
+ if (ret)
+ goto disable_runtimepm;
+
+ return 0;
- return drv->probe(func, id);
+disable_runtimepm:
+ pm_runtime_put_noidle(dev);
+out:
+ return ret;
}
static int sdio_bus_remove(struct device *dev)
@@ -142,6 +161,8 @@ static int sdio_bus_remove(struct device *dev)
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
+ pm_runtime_get_sync(dev);
+
drv->remove(func);
if (func->irq_handler) {
@@ -152,6 +173,11 @@ static int sdio_bus_remove(struct device *dev)
sdio_release_host(func);
}
+ pm_runtime_put_noidle(dev);
+
+ /* Undo the runtime PM settings in sdio_bus_probe() */
+ pm_runtime_put_noidle(dev);
+
return 0;
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
