Search Linux Wireless

Re: rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out, invoke forced tx handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Is this why the rt307x chips experience considerable amount of packet loss  in managed mode, when connected to an AP? With the rt2870sta drivers and a rt3070 device I experience no packet loss whatsoever. When rt2800usb is being utilized, large amount of packet loss occurs between the client and AP as well as duplicate packets.

Walt

> It is being worked on, but it cannot be fully resolved. It
> is
> currently simply a fact
> that the DMA can lockup in the device even the official
> Ralink driver
> has a watchdog
> function which resets the TX queue whenever it detects the
> lockup.
>
> I am currently working on improving the detection, since
> there can be
> a DMA timeout
> and a TX status report timeout. (Where the latter occurs
> much more
> often then the DMA
> timeout). This should decrease the packet loss somewhat,
> but will not
> prevent the
> problems to occur.
>
> Ivo


      
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux