From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Signed-off-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800.h | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 5c006a7..70a5cb8 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1953,6 +1953,8 @@ struct mac_iveiv_entry {
* TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
* BW: Channel bandwidth 20MHz or 40 MHz
* STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will
+ * aggregate consecutive frames with the same RA and QoS TID.
*/
#define TXWI_W0_FRAG FIELD32(0x00000001)
#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
@@ -1976,7 +1978,9 @@ struct mac_iveiv_entry {
* WIRELESS_CLI_ID: Client ID for WCID table access
* MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame
* PACKETID: Will be latched into the TX_STA_FIFO register once the according
- * frame was processed. 0: Don't report tx status for this frame.
+ * frame was processed. If multiple frames are aggregated together
+ * (AMPDU==1) the reported tx status will always contain the packet
+ * id of the first frame. 0: Don't report tx status for this frame.
*/
#define TXWI_W1_ACK FIELD32(0x00000001)
#define TXWI_W1_NSEQ FIELD32(0x00000002)
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
