From: Johannes Berg <johannes.berg@xxxxxxxxx>
Define the new host commands and notifications
REPLY_WIPAN_PARAMS
REPLY_WIPAN_RXON
REPLY_WIPAN_RXON_TIMING
REPLY_WIPAN_RXON_ASSOC
REPLY_WIPAN_QOS_PARAM
REPLY_WIPAN_WEPKEY
REPLY_WIPAN_P2P_CHANNEL_SWITCH
REPLY_WIPAN_NOA_NOTIFICATION
and their corresponding structures along with the PAN
station flag, the PAN AP sta ID and new dev types for
the second context.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-commands.h | 109 ++++++++++++++++++++++++++-
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 8 ++
2 files changed, 116 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 55779bf..3e4ba31 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -180,6 +180,16 @@ enum {
REPLY_BT_COEX_PROFILE_NOTIF = 0xce,
REPLY_BT_COEX_SCO = 0xcf,
+ /* PAN commands */
+ REPLY_WIPAN_PARAMS = 0xb2,
+ REPLY_WIPAN_RXON = 0xb3, /* use REPLY_RXON structure */
+ REPLY_WIPAN_RXON_TIMING = 0xb4, /* use REPLY_RXON_TIMING structure */
+ REPLY_WIPAN_RXON_ASSOC = 0xb6, /* use REPLY_RXON_ASSOC structure */
+ REPLY_WIPAN_QOS_PARAM = 0xb7, /* use REPLY_QOS_PARAM structure */
+ REPLY_WIPAN_WEPKEY = 0xb8, /* use REPLY_WEPKEY structure */
+ REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9,
+ REPLY_WIPAN_NOA_NOTIFICATION = 0xbc,
+
REPLY_MAX = 0xff
};
@@ -607,6 +617,9 @@ enum {
RXON_DEV_TYPE_ESS = 3,
RXON_DEV_TYPE_IBSS = 4,
RXON_DEV_TYPE_SNIFFER = 6,
+ RXON_DEV_TYPE_CP = 7,
+ RXON_DEV_TYPE_2STA = 8,
+ RXON_DEV_TYPE_P2P = 9,
};
@@ -823,7 +836,8 @@ struct iwl_rxon_time_cmd {
__le16 atim_window;
__le32 beacon_init_val;
__le16 listen_interval;
- __le16 reserved;
+ u8 dtim_period;
+ u8 delta_cp_bss_tbtts;
} __packed;
/*
@@ -960,11 +974,13 @@ struct iwl_qosparam_cmd {
/* Special, dedicated locations within device's station table */
#define IWL_AP_ID 0
+#define IWL_AP_ID_PAN 1
#define IWL_STA_ID 2
#define IWL3945_BROADCAST_ID 24
#define IWL3945_STATION_COUNT 25
#define IWL4965_BROADCAST_ID 31
#define IWL4965_STATION_COUNT 32
+#define IWLAGN_PAN_BCAST_ID 14
#define IWLAGN_BROADCAST_ID 15
#define IWLAGN_STATION_COUNT 16
@@ -973,6 +989,7 @@ struct iwl_qosparam_cmd {
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
+#define STA_FLG_PAN_STATION cpu_to_le32(1 << 13)
#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
@@ -4309,4 +4326,94 @@ struct iwl_rx_packet {
int iwl_agn_check_rxon_cmd(struct iwl_priv *priv);
+/*
+ * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification)
+ */
+
+/**
+ * struct iwl_wipan_slot
+ * @width: Time in TU
+ * @type:
+ * 0 - BSS
+ * 1 - PAN
+ */
+struct iwl_wipan_slot {
+ __le16 width;
+ u8 type;
+ u8 reserved;
+} __packed;
+
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_CTS BIT(1) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_QUIET BIT(2) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE BIT(3) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_FILTER_BEACON_NOTIF BIT(4)
+#define IWL_WIPAN_PARAMS_FLG_FULL_SLOTTED_MODE BIT(5)
+
+/**
+ * struct iwl_wipan_params_cmd
+ * @flags:
+ * bit0: reserved
+ * bit1: CP leave channel with CTS
+ * bit2: CP leave channel qith Quiet
+ * bit3: slotted mode
+ * 1 - work in slotted mode
+ * 0 - work in non slotted mode
+ * bit4: filter beacon notification
+ * bit5: full tx slotted mode. if this flag is set,
+ * uCode will perform leaving channel methods in context switch
+ * also when working in same channel mode
+ * @num_slots: 1 - 10
+ */
+struct iwl_wipan_params_cmd {
+ __le16 flags;
+ u8 reserved;
+ u8 num_slots;
+ struct iwl_wipan_slot slots[10];
+} __packed;
+
+/*
+ * REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9
+ *
+ * TODO: Figure out what this is used for,
+ * it can only switch between 2.4 GHz
+ * channels!!
+ */
+
+struct iwl_wipan_p2p_channel_switch_cmd {
+ __le16 channel;
+ __le16 reserved;
+};
+
+/*
+ * REPLY_WIPAN_NOA_NOTIFICATION = 0xbc
+ *
+ * This is used by the device to notify us of the
+ * NoA schedule it determined so we can forward it
+ * to userspace for inclusion in probe responses.
+ *
+ * In beacons, the NoA schedule is simply appended
+ * to the frame we give the device.
+ */
+
+struct iwl_wipan_noa_descriptor {
+ u8 count;
+ __le32 duration;
+ __le32 interval;
+ __le32 starttime;
+} __packed;
+
+struct iwl_wipan_noa_attribute {
+ u8 id;
+ __le16 length;
+ u8 index;
+ u8 ct_window;
+ struct iwl_wipan_noa_descriptor descr0, descr1;
+ u8 reserved;
+} __packed;
+
+struct iwl_wipan_noa_notification {
+ u32 noa_active;
+ struct iwl_wipan_noa_attribute noa_attribute;
+} __packed;
+
#endif /* __iwl_commands_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 9fb2035..c373b53 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -100,6 +100,14 @@ const char *get_cmd_string(u8 cmd)
IWL_CMD(REPLY_BT_COEX_PROFILE_NOTIF);
IWL_CMD(REPLY_BT_COEX_PRIO_TABLE);
IWL_CMD(REPLY_BT_COEX_PROT_ENV);
+ IWL_CMD(REPLY_WIPAN_PARAMS);
+ IWL_CMD(REPLY_WIPAN_RXON);
+ IWL_CMD(REPLY_WIPAN_RXON_TIMING);
+ IWL_CMD(REPLY_WIPAN_RXON_ASSOC);
+ IWL_CMD(REPLY_WIPAN_QOS_PARAM);
+ IWL_CMD(REPLY_WIPAN_WEPKEY);
+ IWL_CMD(REPLY_WIPAN_P2P_CHANNEL_SWITCH);
+ IWL_CMD(REPLY_WIPAN_NOA_NOTIFICATION);
default:
return "UNKNOWN";
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
