Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@xxxxxxxxxx Signed-off-by: Vivek Natarajan <vnatarajan@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index ebed9d1..7d09b4b 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -366,7 +366,8 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv, caps = WLAN_RC_HT_FLAG; if (sta->ht_cap.mcs.rx_mask[1]) caps |= WLAN_RC_DS_FLAG; - if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) && + (conf_is_ht40(&priv->hw->conf))) caps |= WLAN_RC_40_FLAG; if (conf_is_ht40(&priv->hw->conf) && (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)) -- 1.7.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
