On 08/01/2010 11:17 AM, David Cozatt wrote: > Accessing http://wireless.kernel.org/en/users/Drivers/p54 shows in unsupported > > * early PrismGT cards (e.g.: Netgear WG511v1, SMC 2802W) > > There are 2 revisions of this model > > random david # lspci -vv | grep SMC > Subsystem: Standard Microsystems Corp [SMC] SMC2802W Wireless PCI Adapter > random david # lspci -vv | grep Wireless > Subsystem: Standard Microsystems Corp [SMC] SMC2802W Wireless PCI Adapter > random david # dmesg | grep phy0 > > phy0: p54 detected a LM86 firmware > phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > phy0: hwaddr 00:04:e2:63:c2:67, MAC:isl3890 RF:Duette3 > phy0: Selected rate control algorithm 'minstrel' > p54pci 0000:00:0a.0: is registered as 'phy0' > > Part numbers: > 99-012084-164 > 99-012084-285 > > You can verify this with choosing the 2802W from the drop down boxes > @http://www.smc.com/index.cfm?event=downloads.searchCriteria&localeCode=EN_USA&knowsPartNumber=false&productCategory=5&modelNumber=536&downloadType=0&os=0 > > Mine is the -164 version. Anything else needed to confirm working properly? If I understand correctly, the device is working - only the wiki is wrong. For my info, what does 'lspci -nnk | grep 2802' show? Larry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
