Hi, just for future reference, here is my report: > Chances are that your device will work in PIO mode -- you can try > building a kernel w/ CONFIG_B43_FORCE_PIO. I tried that and it solved the original problem. This wasn't very helpful though, since subsequently I ran into the "No probe response from AP" bug, probably similar to: https://lists.berlios.de/pipermail/bcm43xx-dev/2010-January/006762.html Therefore I finally made the switch to 2.6.34 which solved this issue, too. Thanks a lot for your advice and keep up the good work!!! Regards, Ferdinand -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
