Don't you need something to make it beacon? On Thu, Jul 29, 2010 at 06:35:45PM +0300, Kirill Zut wrote: > --- > This patch makes ad-hoc mode available on RTL8187 > > Signed-off-by: Kirill Zut <kirill.zut@xxxxxxxxxxx> > --- > --- linux-2.6.x/drivers/net/wireless/rtl818x/rtl8187_dev.c.orig 2010-07-29 14:40:09.000000000 +0300 > +++ linux-2.6.x/drivers/net/wireless/rtl818x/rtl8187_dev.c 2010-07-29 14:59:39.000000000 +0300 > @@ -1032,6 +1032,7 @@ static int rtl8187_add_interface(struct > > switch (vif->type) { > case NL80211_IFTYPE_STATION: > + case NL80211_IFTYPE_ADHOC: > break; > default: > goto exit; > @@ -1178,7 +1179,10 @@ static void rtl8187_bss_info_changed(str > reg = 0; > > if (is_valid_ether_addr(info->bssid)) { > - reg |= RTL818X_MSR_INFRA; > + if (vif->type == NL80211_IFTYPE_ADHOC) > + reg |= RTL818X_MSR_ADHOC; > + else > + reg |= RTL818X_MSR_INFRA; > rtl818x_iowrite8(priv, &priv->map->MSR, reg); > } else { > reg |= RTL818X_MSR_NO_LINK; > @@ -1502,7 +1506,8 @@ static int __devinit rtl8187_probe(struc > * XXX: Once this driver supports anything that requires > * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ. > */ > - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); > + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | > + BIT(NL80211_IFTYPE_ADHOC); > > if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) > printk(KERN_INFO "rtl8187: inconsistency between id with OEM" > -- John W. Linville Someday the world will need a hero, and you linville@xxxxxxxxxxxxx might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html