From: Ivo van Doorn <IvDoorn@xxxxxxxxx> IEEE80211_HT_CAP_RX_STBC is a 2 bit flag, and should thus never be set as normal flag. Instead we must read the number of RX paths from the EEPROM and set the IEEE80211_HT_CAP_RX_STBC with the correct value (using the same logic as the number of TX streams). Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2800lib.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 5125315..2d0a216 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2572,12 +2572,15 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | - IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_RX_STBC; + IEEE80211_HT_CAP_SGI_40; if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) >= 2) spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC; + spec->ht.cap |= + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) << + IEEE80211_HT_CAP_RX_STBC_SHIFT; + spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = -- 1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
