From: Ivo van Doorn <ivdoorn@xxxxxxxxx> For the Master mode case, we initialized the BSSID as the MAC address, but never wrote it into the registers. This causes Hardware crypto to break in Master mode when receiving frames which require the BSSID to be filled in. This is safe for STA mode since the BSSID will be initialized to 00:00:00:00:00 at this point, but will be set to the correct value later when the device associates. Signed-off-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx> Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx> Acked-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2x00mac.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index abbd857..2071cf3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -282,7 +282,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * has been initialized. Otherwise the device can reset * the MAC registers. */ - rt2x00lib_config_intf(rt2x00dev, intf, vif->type, intf->mac, NULL); + rt2x00lib_config_intf(rt2x00dev, intf, vif->type, + intf->mac, intf->bssid); /* * Some filters depend on the current working mode. We can force -- 1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
