I booted now with 'pcie_aspm=force': # dmesg | grep -i aspm [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3-iniza-686-kms root=UUID=b1333729-42ce-4a1b-9669-41c14c42bb81 ro nomodeset 3 pcie_aspm=force [ 0.000000] PCIe ASPM is forcedly enabled # lspci -vvvv -s 10:00.0 | grep -i aspm LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ Full dmesg and lspci for iwl3945 outputs are attached. - Sedat - On Tue, Jun 22, 2010 at 12:44 PM, Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx> wrote: > Hi, > > yesterday, I was playing with PowerTop and my iwl3945 still is in the > TOP 3 of energy user. > > Inspired by the recently published ASPM doc from Luis [2] I played a > bit with ASPM. > > Currently, I am using a 2.6.35-rc3 Linux-kernel with latest > acpi-2.6/release fixes. > > # dmesg | grep -i aspm > [ 0.226963] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > [ 0.227629] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > [ 0.228205] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > > # for i in 01:00.0 08:00.0 10:00.0 ; do lspci -v | grep $i ; done > 01:00.0 VGA compatible controller: ATI Technologies Inc M52 [Mobility > Radeon X1300] (prog-if 00 [VGA controller]) > 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M > Gigabit Ethernet PCI Express (rev 21) > 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG > [Golan] Network Connection (rev 02) > > # lspci -vvvv -s 10:00.0 | grep -i aspm > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <128ns, L1 <64us > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > Before I will try 'pcie_aspm=force' cheat-code I wanted to ask about > the status of iwlwifi and ASPM. > Is there code available. yet? Which kernel has it - linux-next, > wireless-testing GIT, iwlwifi GIT? > Which user-space apps are required? > IIRC iw [3] from GIT has already "iw: add set/get power_save commands" [4]. > Anyone tested ASPM with iwlwifi hardware? Experiences? > > Beyond ASPM code, what is the actual status on power-mangement for > wifi-hardware in general? > IIRC it was turned off by default (with 2.6.33?)? > > Thanks for any help in advance. > > > Kind Regards, > - Sedat - > > > [1] http://wireless.kernel.org/en/users/Documentation/ASPM > [2] http://marc.info/?l=linux-wireless&m=127716115227206&w=2 > [3] http://git.sipsolutions.net/?p=iw.git > [4] http://git.sipsolutions.net/?p=iw.git;a=commit;h=cf40ef379fd6c74a01092d1dfdd936385ea402b0 >
00000] ACPI: RSDP 000f7870 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 7ffe57c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 7ffe5684 000F4 (v04 HP 30AC 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 7ffe5acc 104BB (v01 HP nc6400 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fff7e80 00040 [ 0.000000] ACPI: SLIC 7ffe5844 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 7ffe59bc 00038 (v01 HP 30AC 00000001 HP 00000001) [ 0.000000] ACPI: APIC 7ffe59f4 00068 (v01 HP 30AC 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 7ffe5a5c 0003C (v01 HP 30AC 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 7ffe5a98 00032 (v02 HP 30AC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 7fff5f87 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 7fff5fe0 0032D (v01 HP HPQSAT 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 7fff6b62 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 7fff6dc1 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 7fff6e67 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] early_res array is doubled to 64 at [8000 - 87ff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] On node 0 totalpages: 524142 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294594 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 128 at [8800 - 97ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @c2400000 s29696 r0 d23552 u2097152 [ 0.000000] pcpu-alloc: s29696 r0 d23552 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520046 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3-iniza-686-kms root=UUID=b1333729-42ce-4a1b-9669-41c14c42bb81 ro nomodeset 3 pcie_aspm=force [ 0.000000] PCIe ASPM is forcedly enabled [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (76 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0001000000 - 00013e60d4] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [00013e7000 - 00013ed140] BRK [ 0.000000] #5 [0000002000 - 0000003000] TRAMPOLINE [ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE [ 0.000000] #8 [0000100000 - 0000a6a000] NEW RAMDISK [ 0.000000] #9 [00013ee000 - 00013ef000] BOOTMEM [ 0.000000] #10 [00013e6200 - 00013e6300] BOOTMEM [ 0.000000] #11 [00013ef000 - 000146f000] BOOTMEM [ 0.000000] #12 [000146f000 - 00014ef000] BOOTMEM [ 0.000000] #13 [00014ef000 - 000156f000] BOOTMEM [ 0.000000] #14 [000156f000 - 00015ef000] BOOTMEM [ 0.000000] #15 [00015ef000 - 000166f000] BOOTMEM [ 0.000000] #16 [000166f000 - 00016ef000] BOOTMEM [ 0.000000] #17 [00016ef000 - 000176f000] BOOTMEM [ 0.000000] #18 [000176f000 - 00017ef000] BOOTMEM [ 0.000000] #19 [00017ef000 - 000186f000] BOOTMEM [ 0.000000] #20 [000186f000 - 00018ef000] BOOTMEM [ 0.000000] #21 [00018ef000 - 000196f000] BOOTMEM [ 0.000000] #22 [000196f000 - 00019ef000] BOOTMEM [ 0.000000] #23 [00019ef000 - 0001a6f000] BOOTMEM [ 0.000000] #24 [0001a6f000 - 0001aef000] BOOTMEM [ 0.000000] #25 [0001aef000 - 0001b6f000] BOOTMEM [ 0.000000] #26 [0001b6f000 - 0001bef000] BOOTMEM [ 0.000000] #27 [0001bef000 - 0001c6f000] BOOTMEM [ 0.000000] #28 [0001c6f000 - 0001cef000] BOOTMEM [ 0.000000] #29 [0001cef000 - 0001d6f000] BOOTMEM [ 0.000000] #30 [0001d6f000 - 0001def000] BOOTMEM [ 0.000000] #31 [0001def000 - 0001e6f000] BOOTMEM [ 0.000000] #32 [0001e6f000 - 0001eef000] BOOTMEM [ 0.000000] #33 [0001eef000 - 0001f6f000] BOOTMEM [ 0.000000] #34 [0001f6f000 - 0001fef000] BOOTMEM [ 0.000000] #35 [0001fef000 - 000206f000] BOOTMEM [ 0.000000] #36 [000206f000 - 00020ef000] BOOTMEM [ 0.000000] #37 [00020ef000 - 000216f000] BOOTMEM [ 0.000000] #38 [000216f000 - 00021ef000] BOOTMEM [ 0.000000] #39 [00021ef000 - 000226f000] BOOTMEM [ 0.000000] #40 [000226f000 - 00022ef000] BOOTMEM [ 0.000000] #41 [00022ef000 - 000236f000] BOOTMEM [ 0.000000] #42 [000236f000 - 00023ef000] BOOTMEM [ 0.000000] #43 [00013e6100 - 00013e61c0] BOOTMEM [ 0.000000] #44 [00023ef000 - 00023f2000] BOOTMEM [ 0.000000] #45 [00023f2000 - 00023f8000] BOOTMEM [ 0.000000] #46 [00013e61c0 - 00013e61e5] BOOTMEM [ 0.000000] #47 [00013e6300 - 00013e6327] BOOTMEM [ 0.000000] #48 [00013e6340 - 00013e64c8] BOOTMEM [ 0.000000] #49 [00013e6500 - 00013e6540] BOOTMEM [ 0.000000] #50 [00013e6540 - 00013e6580] BOOTMEM [ 0.000000] #51 [00013e6580 - 00013e65c0] BOOTMEM [ 0.000000] #52 [00013e65c0 - 00013e6600] BOOTMEM [ 0.000000] #53 [00013e6600 - 00013e6640] BOOTMEM [ 0.000000] #54 [00013e6640 - 00013e6680] BOOTMEM [ 0.000000] #55 [00013e6680 - 00013e66c0] BOOTMEM [ 0.000000] #56 [00013e66c0 - 00013e6700] BOOTMEM [ 0.000000] #57 [00013e6700 - 00013e6740] BOOTMEM [ 0.000000] #58 [00013e6740 - 00013e6780] BOOTMEM [ 0.000000] #59 [00013e6780 - 00013e67c0] BOOTMEM [ 0.000000] #60 [00013e67c0 - 00013e6800] BOOTMEM [ 0.000000] #61 [00013e6800 - 00013e6840] BOOTMEM [ 0.000000] #62 [00013e6840 - 00013e6850] BOOTMEM [ 0.000000] #63 [00013e6880 - 00013e6900] BOOTMEM [ 0.000000] #64 [00013e6900 - 00013e6980] BOOTMEM [ 0.000000] #65 [0002400000 - 000240d000] BOOTMEM [ 0.000000] #66 [0002600000 - 000260d000] BOOTMEM [ 0.000000] #67 [00013e6980 - 00013e6984] BOOTMEM [ 0.000000] #68 [00013e69c0 - 00013e69c4] BOOTMEM [ 0.000000] #69 [00013e6a00 - 00013e6a08] BOOTMEM [ 0.000000] #70 [00013e6a40 - 00013e6a48] BOOTMEM [ 0.000000] #71 [00013e6a80 - 00013e6b28] BOOTMEM [ 0.000000] #72 [00013e6b40 - 00013e6ba8] BOOTMEM [ 0.000000] #73 [00023f8000 - 00023fc000] BOOTMEM [ 0.000000] #74 [000240d000 - 000248d000] BOOTMEM [ 0.000000] #75 [000248d000 - 00024cd000] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0) [ 0.000000] Memory: 2065564k/2096960k available (2205k kernel code, 31004k reserved, 1056k data, 368k init, 1187656k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1330000 - 0xc138c000 ( 368 kB) [ 0.000000] .data : 0xc122741b - 0xc132f598 (1056 kB) [ 0.000000] .text : 0xc1000000 - 0xc122741b (2205 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.329 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.65 BogoMIPS (lpj=1995329) [ 0.002004] pid_max: default: 32768 minimum: 301 [ 0.002324] Security Framework initialized [ 0.002631] SELinux: Disabled at boot. [ 0.003009] Mount-cache hash table entries: 512 [ 0.003446] Initializing cgroup subsys ns [ 0.003749] Initializing cgroup subsys cpuacct [ 0.004006] Initializing cgroup subsys devices [ 0.004310] Initializing cgroup subsys freezer [ 0.004612] Initializing cgroup subsys net_cls [ 0.005029] CPU: Physical Processor ID: 0 [ 0.005331] CPU: Processor Core ID: 0 [ 0.005635] mce: CPU supports 6 MCE banks [ 0.006009] CPU0: Thermal monitoring handled by SMI [ 0.006013] using mwait in idle threads. [ 0.006322] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.007003] PEBS disabled due to CPU errata. [ 0.007309] ... version: 2 [ 0.007612] ... bit width: 40 [ 0.008003] ... generic registers: 2 [ 0.008304] ... value mask: 000000ffffffffff [ 0.008608] ... max period: 000000007fffffff [ 0.008912] ... fixed-purpose events: 3 [ 0.009003] ... event mask: 0000000700000003 [ 0.010502] ACPI: Core revision 20100428 [ 0.028050] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028733] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.039138] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.044020] Booting Node 0, Processors #1 Ok. [ 0.001999] Initializing CPU#1 [ 0.001999] CPU1: Thermal monitoring handled by SMI [ 0.116024] Brought up 2 CPUs [ 0.116629] Total of 2 processors activated (7980.48 BogoMIPS). [ 0.118102] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.118554] regulator: core version 0.5 [ 0.119053] NET: Registered protocol family 16 [ 0.119375] ACPI: bus type pci registered [ 0.120053] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.120560] PCI: not using MMCONFIG [ 0.122485] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 [ 0.122790] PCI: Using configuration type 1 for base access [ 0.124035] bio: create slab <bio-0> at 0 [ 0.127365] ACPI: EC: Look up EC in DSDT [ 0.188922] ACPI: SSDT 7fff63d5 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.190215] ACPI: Dynamic OEM Table Load: [ 0.190584] ACPI: SSDT (null) 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.191586] ACPI: SSDT 7fff6697 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.193086] ACPI: Dynamic OEM Table Load: [ 0.193590] ACPI: SSDT (null) 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.194421] ACPI: SSDT 7fff630d 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.195865] ACPI: Dynamic OEM Table Load: [ 0.196402] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.197139] ACPI: SSDT 7fff6612 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.198558] ACPI: Dynamic OEM Table Load: [ 0.199001] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.214142] ACPI: Interpreter enabled [ 0.214450] ACPI: (supports S0 S3 S4 S5) [ 0.215003] ACPI: Using IOAPIC for interrupt routing [ 0.215362] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.217294] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.217799] PCI: Using MMCONFIG for extended config space [ 0.218150] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.234083] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.235207] ACPI: Power Resource [C1F5] (on) [ 0.235667] ACPI: Power Resource [C1FC] (on) [ 0.236050] ACPI: Power Resource [C219] (on) [ 0.236399] ACPI: Power Resource [C221] (on) [ 0.236799] ACPI: Power Resource [C32A] (off) [ 0.237092] ACPI: Power Resource [C32B] (off) [ 0.237487] ACPI: Power Resource [C32C] (off) [ 0.237882] ACPI: Power Resource [C32D] (off) [ 0.238092] ACPI: Power Resource [C32E] (off) [ 0.238484] ACPI: Power Resource [C32F] (off) [ 0.239115] ACPI: Power Resource [C330] (off) [ 0.239508] ACPI: Power Resource [C331] (off) [ 0.239899] ACPI: Power Resource [C332] (off) [ 0.240091] ACPI: Power Resource [C333] (off) [ 0.240435] ACPI: Power Resource [C334] (off) [ 0.241381] ACPI: No dock devices found. [ 0.241686] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.246741] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 0.256052] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.256056] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.256059] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.256063] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfedfffff] (ignored) [ 0.256066] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) [ 0.256069] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.256158] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.256161] pci 0000:00:01.0: PME# disabled [ 0.256244] pci 0000:00:1b.0: reg 10: [mem 0xe0700000-0xe0703fff 64bit] [ 0.256307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.256312] pci 0000:00:1b.0: PME# disabled [ 0.256413] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.256418] pci 0000:00:1c.0: PME# disabled [ 0.256522] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.256527] pci 0000:00:1c.1: PME# disabled [ 0.256632] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.256637] pci 0000:00:1c.3: PME# disabled [ 0.256704] pci 0000:00:1d.0: reg 20: [io 0x5000-0x501f] [ 0.256770] pci 0000:00:1d.1: reg 20: [io 0x5020-0x503f] [ 0.256836] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f] [ 0.256902] pci 0000:00:1d.3: reg 20: [io 0x5060-0x507f] [ 0.256964] pci 0000:00:1d.7: reg 10: [mem 0xe0704000-0xe07043ff] [ 0.257033] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.257039] pci 0000:00:1d.7: PME# disabled [ 0.257206] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.257713] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 0.258004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.258509] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f) [ 0.259005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) [ 0.259558] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.259566] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.259574] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.259583] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.259591] pci 0000:00:1f.1: reg 20: [io 0x5080-0x508f] [ 0.259651] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7] [ 0.259660] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7] [ 0.259668] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377] [ 0.259676] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577] [ 0.259684] pci 0000:00:1f.2: reg 20: [io 0x50b0-0x50bf] [ 0.259693] pci 0000:00:1f.2: reg 24: [mem 0xe0705000-0xe07053ff] [ 0.259731] pci 0000:00:1f.2: PME# supported from D3hot [ 0.259736] pci 0000:00:1f.2: PME# disabled [ 0.259825] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref] [ 0.259836] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff] [ 0.259847] pci 0000:01:00.0: reg 18: [mem 0xe0600000-0xe060ffff] [ 0.259878] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.259920] pci 0000:01:00.0: supports D1 D2 [ 0.261022] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.261328] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.261332] pci 0000:00:01.0: bridge window [mem 0xe0600000-0xe06fffff] [ 0.261338] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.261593] pci 0000:08:00.0: reg 10: [mem 0xe0100000-0xe010ffff 64bit] [ 0.261883] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.261897] pci 0000:08:00.0: PME# disabled [ 0.264077] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.264386] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.264392] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe01fffff] [ 0.264400] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.264600] pci 0000:10:00.0: reg 10: [mem 0xe0000000-0xe0000fff] [ 0.264845] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.264858] pci 0000:10:00.0: PME# disabled [ 0.266075] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.266383] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.266388] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] [ 0.266397] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.266459] pci 0000:00:1c.3: PCI bridge to [bus 20-20] [ 0.266767] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff] [ 0.266773] pci 0000:00:1c.3: bridge window [mem 0xdc000000-0xdfffffff] [ 0.266781] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.266863] pci 0000:02:06.0: reg 10: [mem 0xe0200000-0xe0200fff] [ 0.266894] pci 0000:02:06.0: supports D1 D2 [ 0.266896] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot [ 0.266903] pci 0000:02:06.0: PME# disabled [ 0.266950] pci 0000:02:06.2: reg 10: [mem 0xe0208000-0xe0208fff] [ 0.267030] pci 0000:02:06.2: supports D1 D2 [ 0.267032] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 0.267038] pci 0000:02:06.2: PME# disabled [ 0.267083] pci 0000:02:06.3: reg 10: [mem 0xe0209000-0xe02090ff] [ 0.267160] pci 0000:02:06.3: supports D1 D2 [ 0.267162] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 0.267168] pci 0000:02:06.3: PME# disabled [ 0.267213] pci 0000:02:06.4: reg 10: [mem 0xe020a000-0xe020afff] [ 0.267223] pci 0000:02:06.4: reg 14: [mem 0xe020b000-0xe020bfff] [ 0.267292] pci 0000:02:06.4: supports D1 D2 [ 0.267295] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot [ 0.267301] pci 0000:02:06.4: PME# disabled [ 0.267368] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) [ 0.267678] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.267683] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe05fffff] [ 0.267692] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.267695] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.267698] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.267756] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.268032] pci_bus 0000:00: on NUMA node 0 [ 0.268037] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.268252] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C084._PRT] [ 0.268317] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C099._PRT] [ 0.268453] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C102._PRT] [ 0.268547] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C112._PRT] [ 0.268639] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C118._PRT] [ 0.297166] ACPI: PCI Interrupt Link [C10E] (IRQs *10 11) [ 0.298212] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11) [ 0.299201] ACPI: PCI Interrupt Link [C110] (IRQs 10 *11) [ 0.300200] ACPI: PCI Interrupt Link [C111] (IRQs 10 11) *5 [ 0.301201] ACPI: PCI Interrupt Link [C124] (IRQs *10 11) [ 0.302231] ACPI: PCI Interrupt Link [C125] (IRQs *10 11) [ 0.303153] ACPI: PCI Interrupt Link [C126] (IRQs 10 *11) [ 0.303953] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20100428/pci_link-185) [ 0.304704] HEST: Table is not found! [ 0.305038] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.305542] vgaarb: loaded [ 0.306034] PCI: Using ACPI for IRQ routing [ 0.307692] PCI: pci_cache_line_size set to 64 bytes [ 0.307984] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.307987] reserve RAM buffer: 000000007ffd0000 - 000000007fffffff [ 0.308072] NetLabel: Initializing [ 0.308343] NetLabel: domain hash size = 128 [ 0.308647] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.309020] NetLabel: unlabeled traffic allowed by default [ 0.309329] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.309640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.310401] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.313019] Switching to clocksource tsc [ 0.313326] pnp: PnP ACPI init [ 0.313337] ACPI: bus type pnp registered [ 0.323609] alloc irq_desc for 23 on node -1 [ 0.323612] alloc kstat_irqs on node -1 [ 0.325451] pnp: PnP ACPI: found 16 devices [ 0.325759] ACPI: ACPI bus type pnp unregistered [ 0.326064] PnPBIOS: Disabled by ACPI PNP [ 0.326374] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.326689] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.326995] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.327308] system 00:0c: [io 0x0500-0x055f] has been reserved [ 0.327614] system 00:0c: [io 0x0800-0x080f] has been reserved [ 0.327923] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.328227] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.328537] system 00:0e: [io 0x04d0-0x04d1] has been reserved [ 0.328846] system 00:0e: [io 0x1000-0x107f] has been reserved [ 0.329151] system 00:0e: [io 0x1100-0x113f] has been reserved [ 0.329456] system 00:0e: [io 0x1200-0x121f] has been reserved [ 0.329763] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.330071] system 00:0e: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.330378] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.330686] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.330992] system 00:0e: [mem 0xfed90000-0xfed9afff] has been reserved [ 0.331302] system 00:0f: [mem 0x000cfc00-0x000cffff] has been reserved [ 0.331607] system 00:0f: [mem 0xfeda0000-0xfedbffff] has been reserved [ 0.331917] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.367292] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.367802] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref] [ 0.368309] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref] [ 0.368820] pci 0000:00:1c.3: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref] [ 0.369329] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff] [ 0.369637] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff] [ 0.369945] pci 0000:00:1e.0: BAR 13: assigned [io 0x8000-0x8fff] [ 0.370252] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0620000-0xe063ffff pref] [ 0.370759] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.371063] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.371370] pci 0000:00:01.0: bridge window [mem 0xe0600000-0xe06fffff] [ 0.371679] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.372186] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.372490] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.372803] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe01fffff] [ 0.373113] pci 0000:00:1c.0: bridge window [mem 0x84000000-0x841fffff 64bit pref] [ 0.378184] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.378490] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.378802] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] [ 0.379111] pci 0000:00:1c.1: bridge window [mem 0x84200000-0x843fffff 64bit pref] [ 0.379620] pci 0000:00:1c.3: PCI bridge to [bus 20-20] [ 0.379929] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff] [ 0.380239] pci 0000:00:1c.3: bridge window [mem 0xdc000000-0xdfffffff] [ 0.380548] pci 0000:00:1c.3: bridge window [mem 0x84400000-0x845fffff 64bit pref] [ 0.381060] pci 0000:02:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.381564] pci 0000:02:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] [ 0.381872] pci 0000:02:06.0: BAR 13: assigned [io 0x8000-0x80ff] [ 0.382178] pci 0000:02:06.0: BAR 14: assigned [io 0x8400-0x84ff] [ 0.382483] pci 0000:02:06.0: CardBus bridge to [bus 03-06] [ 0.382790] pci 0000:02:06.0: bridge window [io 0x8000-0x80ff] [ 0.383098] pci 0000:02:06.0: bridge window [io 0x8400-0x84ff] [ 0.383408] pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.383916] pci 0000:02:06.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.384226] pci 0000:00:1e.0: PCI bridge to [bus 02-03] [ 0.384536] pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff] [ 0.384849] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe05fffff] [ 0.385162] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.385681] alloc irq_desc for 16 on node -1 [ 0.385683] alloc kstat_irqs on node -1 [ 0.385688] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.385999] pci 0000:00:01.0: setting latency timer to 64 [ 0.386009] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.386322] pci 0000:00:1c.0: setting latency timer to 64 [ 0.386332] alloc irq_desc for 17 on node -1 [ 0.386334] alloc kstat_irqs on node -1 [ 0.386338] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.386650] pci 0000:00:1c.1: setting latency timer to 64 [ 0.386661] alloc irq_desc for 19 on node -1 [ 0.386663] alloc kstat_irqs on node -1 [ 0.386667] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.386975] pci 0000:00:1c.3: setting latency timer to 64 [ 0.386984] pci 0000:00:1e.0: setting latency timer to 64 [ 0.386997] alloc irq_desc for 18 on node -1 [ 0.386999] alloc kstat_irqs on node -1 [ 0.387003] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.387314] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.387316] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.387319] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.387321] pci_bus 0000:01: resource 1 [mem 0xe0600000-0xe06fffff] [ 0.387324] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.387327] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] [ 0.387329] pci_bus 0000:08: resource 1 [mem 0xe0100000-0xe01fffff] [ 0.387332] pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref] [ 0.387335] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff] [ 0.387337] pci_bus 0000:10: resource 1 [mem 0xe0000000-0xe00fffff] [ 0.387340] pci_bus 0000:10: resource 2 [mem 0x84200000-0x843fffff 64bit pref] [ 0.387342] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] [ 0.387345] pci_bus 0000:20: resource 1 [mem 0xdc000000-0xdfffffff] [ 0.387348] pci_bus 0000:20: resource 2 [mem 0x84400000-0x845fffff 64bit pref] [ 0.387350] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff] [ 0.387353] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe05fffff] [ 0.387355] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.387358] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.387360] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.387363] pci_bus 0000:03: resource 0 [io 0x8000-0x80ff] [ 0.387365] pci_bus 0000:03: resource 1 [io 0x8400-0x84ff] [ 0.387368] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.387370] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff] [ 0.387399] NET: Registered protocol family 2 [ 0.387758] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.388294] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389183] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.389679] TCP: Hash tables configured (established 131072 bind 65536) [ 0.389984] TCP reno registered [ 0.390286] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.390598] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.390974] NET: Registered protocol family 1 [ 0.391412] pci 0000:01:00.0: Boot video device [ 0.391528] PCI: CLS 64 bytes, default 64 [ 0.391572] Unpacking initramfs... [ 0.676574] Freeing initrd memory: 9640k freed [ 0.683460] audit: initializing netlink socket (disabled) [ 0.683787] type=2000 audit(1277211503.682:1): initialized [ 0.684282] highmem bounce pool size: 64 pages [ 0.684618] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.687920] VFS: Disk quotas dquot_6.5.2 [ 0.688321] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.688821] msgmni has been set to 1733 [ 0.689360] alg: No test for stdrng (krng) [ 0.690091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.690600] io scheduler noop registered [ 0.690903] io scheduler deadline registered [ 0.691215] io scheduler cfq registered (default) [ 0.691645] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.691674] alloc irq_desc for 40 on node -1 [ 0.691676] alloc kstat_irqs on node -1 [ 0.691687] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.691814] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.691861] alloc irq_desc for 41 on node -1 [ 0.691863] alloc kstat_irqs on node -1 [ 0.691872] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.692068] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.692115] alloc irq_desc for 42 on node -1 [ 0.692117] alloc kstat_irqs on node -1 [ 0.692126] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.692319] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.692366] alloc irq_desc for 43 on node -1 [ 0.692368] alloc kstat_irqs on node -1 [ 0.692377] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.692978] ERST: Table is not found! [ 0.693282] EINJ: Table is not found! [ 0.693620] isapnp: Scanning for PnP cards... [ 1.051508] isapnp: No Plug & Play device found [ 1.055576] Linux agpgart interface v0.103 [ 1.055935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.056569] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 1.057535] Fixed MDIO Bus: probed [ 1.057970] PNP: PS/2 Controller [PNP0303:C216,PNP0f13:C217] at 0x60,0x64 irq 1,12 [ 1.060126] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.061151] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.061464] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.061772] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.062079] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.062390] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.062841] mice: PS/2 mouse device common for all mice [ 1.063205] cpuidle: using governor ladder [ 1.063544] cpuidle: using governor menu [ 1.064132] TCP cubic registered [ 1.064499] Using IPI No-Shortcut mode [ 1.064953] registered taskstats version 1 [ 1.065863] Freeing unused kernel memory: 368k freed [ 1.066379] Write protecting the kernel text: 2208k [ 1.066714] Write protecting the kernel read-only data: 856k [ 1.084749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.273028] usbcore: registered new interface driver usbfs [ 1.273611] usbcore: registered new interface driver hub [ 1.274951] SCSI subsystem initialized [ 1.276048] tg3.c:v3.110 (April 9, 2010) [ 1.276528] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.276903] tg3 0000:08:00.0: setting latency timer to 64 [ 1.296170] usbcore: registered new device driver usb [ 1.326360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.326933] alloc irq_desc for 20 on node -1 [ 1.326936] alloc kstat_irqs on node -1 [ 1.326944] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.327538] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.327542] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.327867] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.327923] tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:16:d4:be:36:66 [ 1.327927] tg3 0000:08:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.327930] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.327933] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.329382] sdhci: Secure Digital Host Controller Interface driver [ 1.329384] sdhci: Copyright(c) Pierre Ossman [ 1.330675] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0) [ 1.330731] alloc irq_desc for 22 on node -1 [ 1.330733] alloc kstat_irqs on node -1 [ 1.330742] sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.330868] Registered led device: mmc0:: [ 1.330948] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 1.332119] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.332129] ACPI: Thermal Zone [TZ0] (80 C) [ 1.332924] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.333258] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.337466] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.337482] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0704000 [ 1.344018] libata version 3.00 loaded. [ 1.347010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.347376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.347522] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.347531] ACPI: Thermal Zone [TZ1] (81 C) [ 1.348343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.348860] usb usb1: Product: EHCI Host Controller [ 1.349176] usb usb1: Manufacturer: Linux 2.6.35-rc3-iniza-686-kms ehci_hcd [ 1.349494] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.349973] hub 1-0:1.0: USB hub found [ 1.350295] hub 1-0:1.0: 8 ports detected [ 1.352503] ata_piix 0000:00:1f.1: version 2.13 [ 1.352517] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.352868] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.353166] uhci_hcd: USB Universal Host Controller Interface driver [ 1.353531] scsi0 : ata_piix [ 1.353958] scsi1 : ata_piix [ 1.359907] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14 [ 1.360220] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15 [ 1.360562] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.360875] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.360879] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.361213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.361766] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000 [ 1.362116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.362432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.362959] usb usb2: Product: UHCI Host Controller [ 1.363394] usb usb2: Manufacturer: Linux 2.6.35-rc3-iniza-686-kms uhci_hcd [ 1.363710] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.364178] hub 2-0:1.0: USB hub found [ 1.364495] hub 2-0:1.0: 2 ports detected [ 1.364863] thermal LNXTHERM:03: registered as thermal_zone2 [ 1.364953] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.365084] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.365090] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.365103] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.365188] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020 [ 1.365239] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.365242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.365244] usb usb3: Product: UHCI Host Controller [ 1.365246] usb usb3: Manufacturer: Linux 2.6.35-rc3-iniza-686-kms uhci_hcd [ 1.365247] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.365392] hub 3-0:1.0: USB hub found [ 1.365397] hub 3-0:1.0: 2 ports detected [ 1.365537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.365554] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.365560] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.365567] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.365647] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 1.365706] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.365709] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.365711] usb usb4: Product: UHCI Host Controller [ 1.365713] usb usb4: Manufacturer: Linux 2.6.35-rc3-iniza-686-kms uhci_hcd [ 1.365714] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.365859] hub 4-0:1.0: USB hub found [ 1.365863] hub 4-0:1.0: 2 ports detected [ 1.366011] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.366033] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.366039] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.366047] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.366169] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060 [ 1.366225] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.366228] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.366230] usb usb5: Product: UHCI Host Controller [ 1.366232] usb usb5: Manufacturer: Linux 2.6.35-rc3-iniza-686-kms uhci_hcd [ 1.366234] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.366380] hub 5-0:1.0: USB hub found [ 1.366384] hub 5-0:1.0: 2 ports detected [ 1.381326] ACPI: Thermal Zone [TZ2] (79 C) [ 1.381808] ata2: port disabled. ignoring. [ 1.396403] thermal LNXTHERM:04: registered as thermal_zone3 [ 1.396718] ACPI: Thermal Zone [TZ3] (59 C) [ 1.405736] thermal LNXTHERM:05: registered as thermal_zone4 [ 1.406054] ACPI: Thermal Zone [TZ4] (31 C) [ 1.410410] thermal LNXTHERM:06: registered as thermal_zone5 [ 1.410726] ACPI: Thermal Zone [TZ5] (64 C) [ 1.535506] ata1.00: ATAPI: MATSHITADVD-RAM UJ-842S, 1.01, max MWDMA2 [ 1.541423] ata1.00: configured for MWDMA2 [ 1.543968] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842S 1.01 PQ: 0 ANSI: 5 [ 1.547261] ahci 0000:00:1f.2: version 3.0 [ 1.547279] alloc irq_desc for 21 on node -1 [ 1.547281] alloc kstat_irqs on node -1 [ 1.547288] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.547635] alloc irq_desc for 44 on node -1 [ 1.547637] alloc kstat_irqs on node -1 [ 1.547647] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.547701] ahci: SSS flag set, parallel bus scan disabled [ 1.548032] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.548544] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.549053] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.549789] scsi2 : ahci [ 1.550236] scsi3 : ahci [ 1.550642] scsi4 : ahci [ 1.551165] scsi5 : ahci [ 1.551577] ata3: SATA max UDMA/133 abar m1024@0xe0705000 port 0xe0705100 irq 44 [ 1.552086] ata4: DUMMY [ 1.552392] ata5: DUMMY [ 1.552696] ata6: DUMMY [ 1.559984] ACPI: Fan [C335] (off) [ 1.560500] ACPI: Fan [C336] (off) [ 1.561001] ACPI: Fan [C337] (off) [ 1.568527] ACPI: Fan [C338] (off) [ 1.569034] ACPI: Fan [C339] (off) [ 1.569550] ACPI: Fan [C33A] (off) [ 1.570047] ACPI: Fan [C33B] (off) [ 1.570547] ACPI: Fan [C33C] (off) [ 1.571044] ACPI: Fan [C33D] (off) [ 1.571545] ACPI: Fan [C33E] (off) [ 1.571945] ACPI: Fan [C33F] (off) [ 1.908261] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 2.038845] usb 1-5: New USB device found, idVendor=152d, idProduct=2329 [ 2.039158] usb 1-5: New USB device strings: Mfr=10, Product=11, SerialNumber=3 [ 2.039666] usb 1-5: Product: Storagebird 35EV821 [ 2.039973] usb 1-5: Manufacturer: 0123456 [ 2.040283] usb 1-5: SerialNumber: 000000000340 [ 2.047993] Initializing USB Mass Storage driver... [ 2.048389] scsi6 : usb-storage 1-5:1.0 [ 2.048766] usbcore: registered new interface driver usb-storage [ 2.049080] USB Mass Storage support registered. [ 2.247010] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 2.318018] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.320790] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.321305] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.321963] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.321967] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.323194] ata3.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7BP, max UDMA/100 [ 2.323502] ata3.00: 156301488 sectors, multi 16: LBA48 [ 2.326426] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.326931] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.327591] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.327595] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.328840] ata3.00: configured for UDMA/100 [ 2.341682] ata3.00: configured for UDMA/100 [ 2.341986] ata3: EH complete [ 2.353111] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 [ 2.361195] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.361772] sd 2:0:0:0: [sda] Write Protect is off [ 2.362079] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.362105] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.362869] sda: [ 2.396944] usb 2-2: New USB device found, idVendor=03f0, idProduct=1e1d [ 2.397555] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.397862] usb 2-2: Product: HP hs2300 HSDPA Broadband Wireless Module [ 2.398170] usb 2-2: Manufacturer: HP [ 2.661009] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.748602] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.795175] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.803342] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.803844] Uniform CD-ROM driver Revision: 3.20 [ 2.804243] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.808621] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.809334] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.815001] usb 3-1: New USB device found, idVendor=08ff, idProduct=2580 [ 2.815348] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.815678] usb 3-1: Product: Fingerprint Sensor [ 3.025012] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 3.091322] scsi 6:0:0:0: Direct-Access WDC WD10 EAVS-00D7B0 PQ: 0 ANSI: 2 CCS [ 3.092393] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.093062] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.094306] sd 6:0:0:0: [sdb] Write Protect is off [ 3.094613] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 3.094616] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.096745] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.097063] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 3.188040] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.188359] sd 6:0:0:0: [sdb] Attached SCSI disk [ 3.188937] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e [ 3.189248] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.189559] usb 3-2: Product: USB-PS/2 Optical Mouse [ 3.189865] usb 3-2: Manufacturer: Logitech [ 3.202533] usbcore: registered new interface driver hiddev [ 3.214166] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1 [ 3.214728] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 3.215267] usbcore: registered new interface driver usbhid [ 3.215577] usbhid: USB HID core driver [ 4.186807] device-mapper: uevent: version 1.0.3 [ 4.187464] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx [ 4.193246] PM: Starting manual resume from disk [ 4.274501] EXT3-fs: barriers not enabled [ 4.288789] kjournald starting. Commit interval 5 seconds [ 4.288810] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 7.009454] udev: starting version 157 [ 7.532988] ACPI: acpi_idle registered with cpuidle [ 7.539611] Monitor-Mwait will be used to enter C-1 state [ 7.539641] Monitor-Mwait will be used to enter C-2 state [ 7.539648] Marking TSC unstable due to TSC halts in idle [ 7.540684] Switching to clocksource hpet [ 7.722477] ACPI: Battery Slot [C1BA] (battery present) [ 7.723071] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 7.723621] ACPI: Sleep Button [C242] [ 7.723979] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 7.724598] ACPI: Lid Switch [C23A] [ 7.724967] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.725764] ACPI: AC Adapter [C1B8] (on-line) [ 7.726110] ACPI: Power Button [PWRF] [ 7.726633] ACPI: Battery Slot [C1B9] (battery absent) [ 7.957801] NET: Registered protocol family 23 [ 8.207527] ACPI: WMI: Mapper loaded [ 8.401630] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 8.535155] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.619343] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 8.619978] [Firmware Bug]: _BCQ is used instead of _BQC [ 8.621492] acpi device:02: registered as cooling_device13 [ 8.622180] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6 [ 8.622696] ACPI: Video Device [C12F] (multi-head: yes rom: no post: no) [ 8.764824] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227 [ 8.765195] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 7, mode: 0x0e [ 8.765708] smsc_ircc_present: can't get sir_base of 0x3e8 [ 8.863984] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 [ 8.864549] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 8.868920] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 8.907953] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 8.966249] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227 [ 8.971555] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 7, mode: 0x0e [ 8.972213] smsc_ircc_present: can't get sir_base of 0x3e8 [ 9.346961] usbcore: registered new interface driver usbserial [ 9.347426] USB Serial support registered for generic [ 9.347783] usbcore: registered new interface driver usbserial_generic [ 9.348129] usbserial: USB Serial Driver core [ 9.446567] rtc_cmos 00:08: RTC can wake from S4 [ 9.446929] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 9.447300] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 9.448788] parport_pc 00:03: reported by Plug and Play ACPI [ 9.449186] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 9.455164] cfg80211: Calling CRDA to update world regulatory domain [ 9.594548] iTCO_vendor_support: vendor-support=0 [ 9.919108] USB Serial support registered for Sierra USB modem [ 9.919489] sierra 2-2:1.0: Sierra USB modem converter detected [ 9.921245] usb 2-2: Sierra USB modem converter now attached to ttyUSB0 [ 9.921622] usb 2-2: Sierra USB modem converter now attached to ttyUSB1 [ 9.921970] usb 2-2: Sierra USB modem converter now attached to ttyUSB2 [ 9.922315] usbcore: registered new interface driver sierra [ 9.922653] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems [ 10.187671] tifm_7xx1 0000:02:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.241568] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 10.241967] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 10.242596] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.323781] lis3lv02d: hardware type NC64x0 found. [ 10.328011] lis3lv02d: 12 bits sensor found [ 10.503271] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 [ 10.504473] Registered led device: hp::hddprotect [ 10.504674] lis3lv02d driver loaded. [ 10.736435] intel_rng: FWH not detected [ 10.767884] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ac] [ 10.768239] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 10.768756] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 10.769286] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 10.769619] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 [ 10.992721] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18 [ 10.993042] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 10.993369] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 10.993893] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x8000-0x8fff] [ 10.994409] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff: excluding 0x8000-0x80ff 0x8400-0x84ff [ 11.002976] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe05fffff] [ 11.003520] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe05fffff: excluding 0xe0200000-0xe023ffff [ 11.004367] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] [ 11.004887] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff [ 11.040706] [drm] Initialized drm 1.1.0 20060810 [ 11.451788] psmouse serio5: ID: 10 00 64 [ 11.544905] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x370-0x37f [ 11.548311] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3f7 0x4d0-0x4d7 [ 11.550177] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 11.551579] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 11.553087] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 11.554084] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 11.554768] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 11.555689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 11.641622] [drm] VGACON disable radeon kernel modesetting. [ 11.642567] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.642890] pci 0000:01:00.0: setting latency timer to 64 [ 11.643134] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 11.901191] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 11.901734] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 11.902154] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.902527] iwl3945 0000:10:00.0: setting latency timer to 64 [ 11.957102] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 11.957609] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 11.958052] alloc irq_desc for 45 on node -1 [ 11.958054] alloc kstat_irqs on node -1 [ 11.958088] iwl3945 0000:10:00.0: irq 45 for MSI/MSI-X [ 12.075517] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 12.866876] cfg80211: World regulatory domain updated: [ 12.867196] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.867714] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.868042] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.868350] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.868671] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.868979] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.103663] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 13.104025] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 13.104347] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.104927] alloc irq_desc for 46 on node -1 [ 13.104930] alloc kstat_irqs on node -1 [ 13.104943] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 13.104981] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.104986] hda-intel: chipset global capabilities = 0x4401 [ 13.114034] hda-intel: codec_mask = 0x3 [ 13.114498] hda-intel: codec #0 probed OK [ 13.114889] hda-intel: codec #1 probed OK [ 13.145611] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 13.146175] hda_codec: model 'hp' is selected for config 103c:0 (HP nx) [ 14.150801] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input11 [ 17.088742] EXT3-fs (sda2): using internal journal [ 20.327044] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 20.437288] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 20.637894] fuse init (API version 7.14) [ 23.379176] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9 [ 23.540589] NET: Registered protocol family 17 [ 24.178740] NET: Registered protocol family 10 [ 24.179605] lo: Disabled Privacy Extensions [ 24.180686] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.032024] lp0: using parport0 (interrupt-driven). [ 28.032586] lp0: console ready [ 28.164594] ppdev: user-space parallel port driver [ 31.828263] wlan0: direct probe to 00:04:0e:e4:00:3d (try 1) [ 31.831083] wlan0: direct probe responded [ 31.835036] wlan0: authenticate with 00:04:0e:e4:00:3d (try 1) [ 31.836746] wlan0: authenticated [ 31.837393] wlan0: associate with 00:04:0e:e4:00:3d (try 1) [ 31.840997] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 31.841018] wlan0: associated [ 31.844164] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 31.923996] padlock: VIA PadLock not detected. [ 33.229107] Bluetooth: Core ver 2.15 [ 33.229482] NET: Registered protocol family 31 [ 33.229814] Bluetooth: HCI device and connection manager initialized [ 33.230133] Bluetooth: HCI socket layer initialized [ 33.279299] Bluetooth: L2CAP ver 2.14 [ 33.279617] Bluetooth: L2CAP socket layer initialized [ 33.289400] Bluetooth: RFCOMM TTY layer initialized [ 33.289728] Bluetooth: RFCOMM socket layer initialized [ 33.290047] Bluetooth: RFCOMM ver 1.11 [ 33.379614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.379940] Bluetooth: BNEP filters: protocol multicast [ 33.503660] Bridge firewalling registered [ 33.602425] Bluetooth: SCO (Voice Link) ver 0.6 [ 33.602953] Bluetooth: SCO socket layer initialized [ 36.692556] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 36.694288] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 42.546040] wlan0: no IPv6 routers present [ 48.166198] [drm] Module unloaded [ 51.258984] [drm] Initialized drm 1.1.0 20060810 [ 51.302362] [drm] radeon kernel modesetting enabled. [ 51.302758] radeon 0000:01:00.0: setting latency timer to 64 [ 51.304327] [drm] initializing kernel modesetting (RV515 0x1002:0x714A). [ 51.306121] [drm] register mmio base: 0xE0600000 [ 51.306436] [drm] register mmio size: 65536 [ 51.307070] ATOM BIOS: M52T [ 51.307487] [drm] Generation 2 PCI interface, using max accessible memory [ 51.307803] radeon 0000:01:00.0: VRAM: 64M 0x00000000 - 0x03FFFFFF (64M used) [ 51.308126] radeon 0000:01:00.0: GTT: 512M 0x04000000 - 0x23FFFFFF [ 51.308645] alloc irq_desc for 47 on node -1 [ 51.308649] alloc kstat_irqs on node -1 [ 51.308673] radeon 0000:01:00.0: irq 47 for MSI/MSI-X [ 51.308692] [drm] radeon: using MSI. [ 51.309093] [drm] radeon: irq initialized. [ 51.310690] [drm] Detected VRAM RAM=64M, BAR=64M [ 51.311057] [drm] RAM width 64bits DDR [ 51.311472] [TTM] Zone kernel: Available graphics memory: 443958 kiB. [ 51.311783] [TTM] Zone highmem: Available graphics memory: 1037786 kiB. [ 51.312145] [TTM] Initializing pool allocator. [ 51.312488] [drm] radeon: 64M of VRAM memory ready [ 51.312797] [drm] radeon: 512M of GTT memory ready. [ 51.313191] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 51.315081] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 51.316900] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 51.317508] [drm] Loading R500 Microcode [ 51.361451] [drm] radeon: ring at 0x0000000004000000 [ 51.361832] [drm] ring test succeeded in 4 usecs [ 51.362428] [drm] radeon: ib pool ready. [ 51.362904] [drm] ib test succeeded in 0 usecs [ 51.363264] [drm] Default TV standard: NTSC [ 51.363608] [drm] Default TV standard: NTSC [ 51.364410] [drm] Default TV standard: NTSC [ 51.364798] [drm] Radeon Display Connectors [ 51.365574] [drm] Connector 0: [ 51.365991] [drm] VGA [ 51.367817] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 51.368550] [drm] Encoders: [ 51.368857] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 51.369175] [drm] Connector 1: [ 51.369530] [drm] LVDS [ 51.369832] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c [ 51.370355] [drm] Encoders: [ 51.370694] [drm] LCD1: INTERNAL_LVTM1 [ 51.370998] [drm] Connector 2: [ 51.371315] [drm] S-video [ 51.371661] [drm] Encoders: [ 51.371963] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 51.372280] [drm] Connector 3: [ 51.372636] [drm] DVI-I [ 51.372938] [drm] HPD1 [ 51.373252] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 51.373793] [drm] Encoders: [ 51.374106] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 51.443368] [drm] radeon: power management initialized [ 51.796427] [drm] fb mappable at 0xD80C0000 [ 51.796733] [drm] vram apper at 0xD8000000 [ 51.797049] [drm] size 4096000 [ 51.797378] [drm] fb depth is 24 [ 51.797692] [drm] pitch is 5120 [ 51.798224] fbcon: radeondrmfb (fb0) is primary device [ 51.944520] Console: switching to colour frame buffer device 160x50 [ 51.949476] fb0: radeondrmfb frame buffer device [ 51.949520] drm: registered panic notifier [ 51.949562] Slow work thread pool: Starting up [ 51.949703] Slow work thread pool: Ready [ 51.949750] [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0 [ 67.890005] CE: hpet increased min_delta_ns to 7500 nsec
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
