Avoid using <foo>_debug function name because that is most commonly
used to emit logging messages.
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/wireless/b43/debugfs.c | 2 +-
drivers/net/wireless/b43/debugfs.h | 4 ++--
drivers/net/wireless/b43/dma.c | 10 +++++-----
drivers/net/wireless/b43/lo.c | 6 +++---
drivers/net/wireless/b43/main.c | 16 ++++++++--------
drivers/net/wireless/b43/phy_g.c | 8 ++++----
6 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 307802c..a9f8d48 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -645,7 +645,7 @@ B43_DEBUGFS_FOPS(restart, NULL, restart_write_file);
B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL);
-bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature)
+bool b43_debugging(struct b43_wldev *dev, enum b43_dyndbg feature)
{
bool enabled;
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index 822aad8..f34da88 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -73,7 +73,7 @@ struct b43_dfsentry {
struct dentry *dyn_debug_dentries[__B43_NR_DYNDBG];
};
-bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature);
+bool b43_debugging(struct b43_wldev *dev, enum b43_dyndbg feature);
void b43_debugfs_init(void);
void b43_debugfs_exit(void);
@@ -84,7 +84,7 @@ void b43_debugfs_log_txstat(struct b43_wldev *dev,
#else /* CONFIG_B43_DEBUG */
-static inline bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature)
+static inline bool b43_debugging(struct b43_wldev *dev, enum b43_dyndbg feature)
{
return 0;
}
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index a6d15c4..6343378 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -265,7 +265,7 @@ static void update_max_used_slots(struct b43_dmaring *ring,
if (current_used_slots <= ring->max_used_slots)
return;
ring->max_used_slots = current_used_slots;
- if (b43_debug(ring->dev, B43_DBG_DMAVERBOSE)) {
+ if (b43_debugging(ring->dev, B43_DBG_DMAVERBOSE)) {
b43_dbg(ring->dev->wl,
"max_used_slots increased to %d on %s ring %d\n",
ring->max_used_slots,
@@ -1264,7 +1264,7 @@ out_unmap_hdr:
static inline int should_inject_overflow(struct b43_dmaring *ring)
{
#ifdef CONFIG_B43_DEBUG
- if (unlikely(b43_debug(ring->dev, B43_DBG_DMAOVERFLOW))) {
+ if (unlikely(b43_debugging(ring->dev, B43_DBG_DMAOVERFLOW))) {
/* Check if we should inject another ringbuffer overflow
* to test handling of this situation in the stack. */
unsigned long next_overflow;
@@ -1340,7 +1340,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
* Because of a race, one packet may be queued after
* the queue is stopped, thus we got called when we shouldn't.
* For now, just refuse the transmit. */
- if (b43_debug(dev, B43_DBG_DMAVERBOSE))
+ if (b43_debugging(dev, B43_DBG_DMAVERBOSE))
b43_err(dev->wl, "Packet after queue stopped\n");
err = -ENOSPC;
goto out;
@@ -1376,7 +1376,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
/* This TX ring is full. */
ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
ring->stopped = 1;
- if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
+ if (b43_debugging(dev, B43_DBG_DMAVERBOSE)) {
b43_dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
}
}
@@ -1494,7 +1494,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
ieee80211_wake_queue(dev->wl->hw, ring->queue_prio);
ring->stopped = 0;
- if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
+ if (b43_debugging(dev, B43_DBG_DMAVERBOSE)) {
b43_dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
}
}
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index c16c35c..b047edd 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -774,7 +774,7 @@ struct b43_lo_calib *b43_calibrate_lo_setting(struct b43_wldev *dev,
lo_measure_restore(dev, &saved_regs);
b43_mac_enable(dev);
- if (b43_debug(dev, B43_DBG_LO)) {
+ if (b43_debugging(dev, B43_DBG_LO)) {
b43_dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) "
"=> I=%d Q=%d\n",
bbatt->att, rfatt->att, rfatt->with_padmix,
@@ -971,7 +971,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
B43_WARN_ON(current_item_expired);
current_item_expired = 1;
}
- if (b43_debug(dev, B43_DBG_LO)) {
+ if (b43_debugging(dev, B43_DBG_LO)) {
b43_dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), "
"I=%d, Q=%d expired\n",
cal->bbatt.att, cal->rfatt.att,
@@ -983,7 +983,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
}
if (current_item_expired || unlikely(list_empty(&lo->calib_list))) {
/* Recalibrate currently used LO setting. */
- if (b43_debug(dev, B43_DBG_LO))
+ if (b43_debugging(dev, B43_DBG_LO))
b43_dbg(dev->wl, "LO: Recalibrating current LO setting\n");
cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt);
if (cal) {
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6343873..3d2c655 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -839,9 +839,9 @@ static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
index -= pairwise_keys_start;
B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
- if (b43_debug(dev, B43_DBG_KEYS)) {
+ if (b43_debugging(dev, B43_DBG_KEYS)) {
b43_dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
- index, iv32);
+ index, iv32);
}
/* Write the key to the RX tkip shared mem */
offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
@@ -1014,7 +1014,7 @@ static void b43_dump_keymemory(struct b43_wldev *dev)
u64 hf;
struct b43_key *key;
- if (!b43_debug(dev, B43_DBG_KEYS))
+ if (!b43_debugging(dev, B43_DBG_KEYS))
return;
hf = b43_hf_read(dev);
@@ -1857,7 +1857,7 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
#if B43_DEBUG
- if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ if (b43_debugging(dev, B43_DBG_VERBOSESTATS)) {
dev->irq_count++;
for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
if (reason & (1 << i))
@@ -2587,7 +2587,7 @@ static void b43_gpio_cleanup(struct b43_wldev *dev)
/* http://bcm-specs.sipsolutions.net/EnableMac */
void b43_mac_enable(struct b43_wldev *dev)
{
- if (b43_debug(dev, B43_DBG_FIRMWARE)) {
+ if (b43_debugging(dev, B43_DBG_FIRMWARE)) {
u16 fwstate;
fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
@@ -2944,7 +2944,7 @@ static void b43_periodic_every15sec(struct b43_wldev *dev)
wmb();
#if B43_DEBUG
- if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ if (b43_debugging(dev, B43_DBG_VERBOSESTATS)) {
unsigned int i;
b43_dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
@@ -2993,14 +2993,14 @@ static void b43_periodic_work_handler(struct work_struct *work)
if (unlikely(b43_status(dev) != B43_STAT_STARTED))
goto out;
- if (b43_debug(dev, B43_DBG_PWORK_STOP))
+ if (b43_debugging(dev, B43_DBG_PWORK_STOP))
goto out_requeue;
do_periodic_work(dev);
dev->periodic_state++;
out_requeue:
- if (b43_debug(dev, B43_DBG_PWORK_FAST))
+ if (b43_debugging(dev, B43_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
delay = round_jiffies_relative(HZ * 15);
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index acadae6..ef539a5 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -236,7 +236,7 @@ static void b43_set_txpower_g(struct b43_wldev *dev,
gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX);
memmove(&gphy->bbatt, bbatt, sizeof(*bbatt));
- if (b43_debug(dev, B43_DBG_XMITPOWER)) {
+ if (b43_debugging(dev, B43_DBG_XMITPOWER)) {
b43_dbg(dev->wl, "Tuning TX-power to bbatt(%u), "
"rfatt(%u), tx_control(0x%02X), "
"tx_bias(0x%02X), tx_magn(0x%02X)\n",
@@ -2862,7 +2862,7 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
gphy->rfatt.att = rfatt;
gphy->bbatt.att = bbatt;
- if (b43_debug(dev, B43_DBG_XMITPOWER))
+ if (b43_debugging(dev, B43_DBG_XMITPOWER))
b43_dbg(dev->wl, "Adjusting TX power\n");
/* Adjust the hardware */
@@ -2929,7 +2929,7 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
desired_pwr = INT_TO_Q52(phy->desired_txpower);
/* And limit it. max_pwr already is Q5.2 */
desired_pwr = clamp_val(desired_pwr, 0, max_pwr);
- if (b43_debug(dev, B43_DBG_XMITPOWER)) {
+ if (b43_debugging(dev, B43_DBG_XMITPOWER)) {
b43_dbg(dev->wl,
"[TX power] current = " Q52_FMT
" dBm, desired = " Q52_FMT
@@ -2958,7 +2958,7 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
bbatt_delta -= 4 * rfatt_delta;
#if B43_DEBUG
- if (b43_debug(dev, B43_DBG_XMITPOWER)) {
+ if (b43_debugging(dev, B43_DBG_XMITPOWER)) {
int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust;
b43_dbg(dev->wl,
"[TX power deltas] %s" Q52_FMT " dBm => "
--
1.7.1.337.g6068.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
