Some vendors require the LED to be ON always irrespective of any
radio activity. Introducing a module parameter to enable this,
so that one can choose between always on or led blink during
activity.
Signed-off-by: Vivek Natarajan <vnatarajan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/gpio.c | 9 ++++++---
drivers/net/wireless/ath/ath9k/init.c | 4 ++++
drivers/net/wireless/ath/ath9k/main.c | 4 +++-
4 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8d163ae..3a14630 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -628,6 +628,7 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
extern struct ieee80211_ops ath9k_ops;
extern int modparam_nohwcrypt;
+extern int led_blink;
irqreturn_t ath_isr(int irq, void *dev);
int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 0ee75e7..3a8ee99 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -76,7 +76,8 @@ static void ath_led_brightness(struct led_classdev *led_cdev,
case LED_FULL:
if (led->led_type == ATH_LED_ASSOC) {
sc->sc_flags |= SC_OP_LED_ASSOCIATED;
- ieee80211_queue_delayed_work(sc->hw,
+ if (led_blink)
+ ieee80211_queue_delayed_work(sc->hw,
&sc->ath_led_blink_work, 0);
} else if (led->led_type == ATH_LED_RADIO) {
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
@@ -143,7 +144,8 @@ void ath_init_leds(struct ath_softc *sc)
/* LED off, active low */
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
- INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
+ if (led_blink)
+ INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
trigger = ieee80211_get_radio_led_name(sc->hw);
snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
@@ -180,7 +182,8 @@ void ath_init_leds(struct ath_softc *sc)
return;
fail:
- cancel_delayed_work_sync(&sc->ath_led_blink_work);
+ if (led_blink)
+ cancel_delayed_work_sync(&sc->ath_led_blink_work);
ath_deinit_leds(sc);
}
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 514a401..b2bf0e8 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -33,6 +33,10 @@ int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
+int led_blink;
+module_param_named(blink, led_blink, int, 0444);
+MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+
/* We use the hw_value as an index into our private channel structure */
#define CHAN2G(_freq, _idx) { \
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c8de50f..5af2596 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1241,7 +1241,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
aphy->state = ATH_WIPHY_INACTIVE;
- cancel_delayed_work_sync(&sc->ath_led_blink_work);
+ if (led_blink)
+ cancel_delayed_work_sync(&sc->ath_led_blink_work);
+
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_work_sync(&sc->paprd_work);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
