From: Johannes Berg <johannes.berg@xxxxxxxxx> When we detect that not all antennas are properly connected, we simply disable the associated chains, but never notify the user at all. Print out a warning so it is obvious that happened and we know where to start looking for related issues. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx> --- drivers/net/wireless/iwlwifi/iwl-calib.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index 7e82277..22fa947 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -846,6 +846,13 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, } } + if (active_chains != priv->hw_params.valid_rx_ant && + active_chains != priv->chain_noise_data.active_chains) + IWL_WARN(priv, + "Detected that not all antennas are connected! " + "Connected: %#x, valid: %#x.\n", + active_chains, priv->hw_params.valid_rx_ant); + /* Save for use within RXON, TX, SCAN commands, etc. */ priv->chain_noise_data.active_chains = active_chains; IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n", -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html