All AR9003 devices are PCI-E only, the extra delay here is not required and only reduces the delay for loading the initial register values by at least 14ms. Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 9 --------- 1 files changed, 0 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index d5e6b08..27feb08 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -543,15 +543,6 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah, u32 val = INI_RA(iniArr, i, column); REG_WRITE(ah, reg, val); - - /* - * Determine if this is a shift register value, and insert the - * configured delay if so. - */ - if (reg >= 0x16000 && reg < 0x17000 - && ah->config.analog_shiftreg) - udelay(100); - DO_DELAY(regWrites); } } -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
