If AP do not provide us supported rates before assiociation, send all rates we are supporting instead of empty information element. Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- net/mac80211/mlme.c | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d3950b7..abd62fc 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -269,12 +269,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, if (wk->bss->wmm_used) wmm = 1; - /* get all rates supported by the device and the AP as - * some APs don't like getting a superset of their rates - * in the association request (e.g. D-Link DAP 1353 in - * b-only mode) */ - rates_len = ieee80211_compatible_rates(wk->bss, sband, &rates); - if ((wk->bss->cbss.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; @@ -309,6 +303,17 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, *pos++ = wk->ssid_len; memcpy(pos, wk->ssid, wk->ssid_len); + if (wk->bss->supp_rates_len) { + /* get all rates supported by the device and the AP as + * some APs don't like getting a superset of their rates + * in the association request (e.g. D-Link DAP 1353 in + * b-only mode) */ + rates_len = ieee80211_compatible_rates(wk->bss, sband, &rates); + } else { + rates = ~0; + rates_len = sband->n_bitrates; + } + /* add all rates which were marked to be used above */ supp_rates_len = rates_len; if (supp_rates_len > 8) -- 1.6.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html