On Wed, Jun 2, 2010 at 3:23 AM, Sujith <Sujith.Manoharan@xxxxxxxxxxx> wrote:
> Do not assign the FW name to driver_info but determine
> it dynamically on device probe. This facilitates adding new
> firmware.
>
> Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
> ---
> drivers/net/wireless/ath/ath9k/hif_usb.c | 39 ++++++++++++++++++++----------
> drivers/net/wireless/ath/ath9k/hif_usb.h | 1 +
> 2 files changed, 27 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> index 77b3591..7da55eb 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> @@ -16,12 +16,9 @@
>
> #include "htc.h"
>
> -#define ATH9K_FW_USB_DEV(devid, fw) \
> - { USB_DEVICE(0x0cf3, devid), .driver_info = (unsigned long) fw }
> -
> static struct usb_device_id ath9k_hif_usb_ids[] = {
> - ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> - ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"),
> + { USB_DEVICE(0x0cf3, 0x9271) },
> + { USB_DEVICE(0x0cf3, 0x1006) },
> { },
> };
>
> @@ -790,21 +787,21 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
> return -EIO;
>
> dev_info(&hif_dev->udev->dev, "ath9k_htc: Transferred FW: %s, size: %ld\n",
> - "ar9271.fw", (unsigned long) hif_dev->firmware->size);
> + hif_dev->fw_name, (unsigned long) hif_dev->firmware->size);
>
> return 0;
> }
>
> -static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev,
> - const char *fw_name)
> +static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
> {
> int ret;
>
> /* Request firmware */
> - ret = request_firmware(&hif_dev->firmware, fw_name, &hif_dev->udev->dev);
> + ret = request_firmware(&hif_dev->firmware, hif_dev->fw_name,
> + &hif_dev->udev->dev);
> if (ret) {
> dev_err(&hif_dev->udev->dev,
> - "ath9k_htc: Firmware - %s not found\n", fw_name);
> + "ath9k_htc: Firmware - %s not found\n", hif_dev->fw_name);
> goto err_fw_req;
> }
>
> @@ -820,7 +817,8 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev,
> ret = ath9k_hif_usb_download_fw(hif_dev);
> if (ret) {
> dev_err(&hif_dev->udev->dev,
> - "ath9k_htc: Firmware - %s download failed\n", fw_name);
> + "ath9k_htc: Firmware - %s download failed\n",
> + hif_dev->fw_name);
> goto err_fw_download;
> }
>
> @@ -847,7 +845,6 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
> {
> struct usb_device *udev = interface_to_usbdev(interface);
> struct hif_device_usb *hif_dev;
> - const char *fw_name = (const char *) id->driver_info;
> int ret = 0;
>
> hif_dev = kzalloc(sizeof(struct hif_device_usb), GFP_KERNEL);
> @@ -872,7 +869,23 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
> goto err_htc_hw_alloc;
> }
>
> - ret = ath9k_hif_usb_dev_init(hif_dev, fw_name);
> + /* Find out which firmware to load */
> +
> + switch(hif_dev->device_id) {
> + case 0x9271:
> + case 0x1006:
> + hif_dev->fw_name = "ar9271.fw";
> + break;
> + default:
> + break;
> + }
> +
> + if (!hif_dev->fw_name) {
> + dev_err(&udev->dev, "Can't determine firmware !\n");
> + goto err_htc_hw_alloc;
> + }
> +
> + ret = ath9k_hif_usb_dev_init(hif_dev);
> if (ret) {
> ret = -EINVAL;
> goto err_hif_init_usb;
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
> index 0aca49b..b2647e8 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.h
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
> @@ -90,6 +90,7 @@ struct hif_device_usb {
> struct usb_anchor regout_submitted;
> struct usb_anchor rx_submitted;
> struct sk_buff *remain_skb;
> + const char *fw_name;
> int rx_remain_len;
> int rx_pkt_len;
> int rx_transfer_len;
I had done some something similar for ar9170 a while back [1] when
adding AVM FRITZ support to ar9170 and then got complaints from Marcel
on this approach since it requires synching the PCI device IDs in two
places. I frankly don't care how we do this but we should try to at
least stick to one way of doing this.
[1] http://osdir.com/ml/linux-wireless/2009-05/msg01219.html
Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
