The rate information on the target has to be updated
for 2-stream devices, along with the correct chainmask.
Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 569b9c0..b7ce902 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -325,9 +325,9 @@ static int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
tcap.flags_ext = 0x80601000;
tcap.ampdu_limit = 0xffff0000;
tcap.ampdu_subframes = 20;
- tcap.tx_chainmask_legacy = 1;
+ tcap.tx_chainmask_legacy = priv->ah->caps.tx_chainmask;
tcap.protmode = 1;
- tcap.tx_chainmask = 1;
+ tcap.tx_chainmask = priv->ah->caps.tx_chainmask;
WMI_CMD_BUF(WMI_TARGET_IC_UPDATE_CMDID, &tcap);
@@ -365,6 +365,11 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv,
trate->rates.ht_rates.rs_nrates = j;
caps = WLAN_RC_HT_FLAG;
+ if (priv->ah->caps.tx_chainmask != 1 &&
+ ath9k_hw_getcapability(priv->ah, ATH9K_CAP_DS, 0, NULL)) {
+ if (sta->ht_cap.mcs.rx_mask[1])
+ caps |= WLAN_RC_DS_FLAG;
+ }
if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
caps |= WLAN_RC_40_FLAG;
if (conf_is_ht40(&priv->hw->conf) &&
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
