Rather than doing a series of RMWs, calculate the
value to be written to the register in question and
do a single REGWRITE. This improves bringup time.
This depends on the analog_shiftreg configuration option,
which is currently buggy. For AP mode, a delay of 100us
has to be the default. For station mode, this knob has to
be enabled on a per-case basis, though it is a little
unclear on when to enable a delay. This can be fixed later though.
Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/eeprom.c | 8 +++
drivers/net/wireless/ath/ath9k/eeprom.h | 1 +
drivers/net/wireless/ath/ath9k/eeprom_9287.c | 69 ++++++++++++--------------
3 files changed, 41 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index ca8704a..a29b2d9 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -24,6 +24,14 @@ static inline u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
}
+void ath9k_hw_analog_shift_regwrite(struct ath_hw *ah, u32 reg, u32 val)
+{
+ REG_WRITE(ah, reg, val);
+
+ if (ah->config.analog_shiftreg)
+ udelay(100);
+}
+
void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
u32 shift, u32 val)
{
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 21354c1..14186f2 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -679,6 +679,7 @@ struct eeprom_ops {
u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
};
+void ath9k_hw_analog_shift_regwrite(struct ath_hw *ah, u32 reg, u32 val);
void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
u32 shift, u32 val);
int16_t ath9k_hw_interpolate(u16 target, u16 srcLeft, u16 srcRight,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 5010cd1..27abfba 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -988,7 +988,7 @@ static void ath9k_hw_ar9287_set_board_values(struct ath_hw *ah,
struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
u16 antWrites[AR9287_ANT_16S];
- u32 regChainOffset;
+ u32 regChainOffset, regval;
u8 txRxAttenLocal;
int i, j, offset_num;
@@ -1075,42 +1075,37 @@ static void ath9k_hw_ar9287_set_board_values(struct ath_hw *ah,
REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
AR_PHY_EXT_CCA0_THRESH62, pModal->thresh62);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0, AR9287_AN_RF2G3_DB1,
- AR9287_AN_RF2G3_DB1_S, pModal->db1);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0, AR9287_AN_RF2G3_DB2,
- AR9287_AN_RF2G3_DB2_S, pModal->db2);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
- AR9287_AN_RF2G3_OB_CCK,
- AR9287_AN_RF2G3_OB_CCK_S, pModal->ob_cck);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
- AR9287_AN_RF2G3_OB_PSK,
- AR9287_AN_RF2G3_OB_PSK_S, pModal->ob_psk);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
- AR9287_AN_RF2G3_OB_QAM,
- AR9287_AN_RF2G3_OB_QAM_S, pModal->ob_qam);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
- AR9287_AN_RF2G3_OB_PAL_OFF,
- AR9287_AN_RF2G3_OB_PAL_OFF_S,
- pModal->ob_pal_off);
-
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
- AR9287_AN_RF2G3_DB1, AR9287_AN_RF2G3_DB1_S,
- pModal->db1);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1, AR9287_AN_RF2G3_DB2,
- AR9287_AN_RF2G3_DB2_S, pModal->db2);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
- AR9287_AN_RF2G3_OB_CCK,
- AR9287_AN_RF2G3_OB_CCK_S, pModal->ob_cck);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
- AR9287_AN_RF2G3_OB_PSK,
- AR9287_AN_RF2G3_OB_PSK_S, pModal->ob_psk);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
- AR9287_AN_RF2G3_OB_QAM,
- AR9287_AN_RF2G3_OB_QAM_S, pModal->ob_qam);
- ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
- AR9287_AN_RF2G3_OB_PAL_OFF,
- AR9287_AN_RF2G3_OB_PAL_OFF_S,
- pModal->ob_pal_off);
+ regval = REG_READ(ah, AR9287_AN_RF2G3_CH0);
+ regval &= ~(AR9287_AN_RF2G3_DB1 |
+ AR9287_AN_RF2G3_DB2 |
+ AR9287_AN_RF2G3_OB_CCK |
+ AR9287_AN_RF2G3_OB_PSK |
+ AR9287_AN_RF2G3_OB_QAM |
+ AR9287_AN_RF2G3_OB_PAL_OFF);
+ regval |= (SM(pModal->db1, AR9287_AN_RF2G3_DB1) |
+ SM(pModal->db2, AR9287_AN_RF2G3_DB2) |
+ SM(pModal->ob_cck, AR9287_AN_RF2G3_OB_CCK) |
+ SM(pModal->ob_psk, AR9287_AN_RF2G3_OB_PSK) |
+ SM(pModal->ob_qam, AR9287_AN_RF2G3_OB_QAM) |
+ SM(pModal->ob_pal_off, AR9287_AN_RF2G3_OB_PAL_OFF));
+
+ ath9k_hw_analog_shift_regwrite(ah, AR9287_AN_RF2G3_CH0, regval);
+
+ regval = REG_READ(ah, AR9287_AN_RF2G3_CH1);
+ regval &= ~(AR9287_AN_RF2G3_DB1 |
+ AR9287_AN_RF2G3_DB2 |
+ AR9287_AN_RF2G3_OB_CCK |
+ AR9287_AN_RF2G3_OB_PSK |
+ AR9287_AN_RF2G3_OB_QAM |
+ AR9287_AN_RF2G3_OB_PAL_OFF);
+ regval |= (SM(pModal->db1, AR9287_AN_RF2G3_DB1) |
+ SM(pModal->db2, AR9287_AN_RF2G3_DB2) |
+ SM(pModal->ob_cck, AR9287_AN_RF2G3_OB_CCK) |
+ SM(pModal->ob_psk, AR9287_AN_RF2G3_OB_PSK) |
+ SM(pModal->ob_qam, AR9287_AN_RF2G3_OB_QAM) |
+ SM(pModal->ob_pal_off, AR9287_AN_RF2G3_OB_PAL_OFF));
+
+ ath9k_hw_analog_shift_regwrite(ah, AR9287_AN_RF2G3_CH1, regval);
REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
AR_PHY_TX_END_DATA_START, pModal->txFrameToDataStart);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
