There is no need to force the separation between a buffer USB vendor
request that does fit the CSR cache and one that doesn't onto the
callers. This is something that the rt2x00usb_vendor_request_buff
function can figure out by itself.
Combine the rt2x00usb_vendor_request_buff and
rt2x00usb_vendor_request_large_buff functions into a single one, as
both of them were equivalent for small buffers anyway.
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2500usb.c | 14 +-----------
drivers/net/wireless/rt2x00/rt2800usb.c | 13 +++--------
drivers/net/wireless/rt2x00/rt2x00usb.c | 22 +--------------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 19 ------------------
drivers/net/wireless/rt2x00/rt73usb.c | 32 ++++++------------------------
5 files changed, 14 insertions(+), 86 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index eb99934..a1af5b8 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -344,7 +344,6 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_crypto *crypto,
struct ieee80211_key_conf *key)
{
- int timeout;
u32 mask;
u16 reg;
@@ -366,18 +365,9 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
key->hw_key_idx += reg ? ffz(reg) : 0;
- /*
- * The encryption key doesn't fit within the CSR cache,
- * this means we should allocate it seperately and use
- * rt2x00usb_vendor_request() to send the key to the hardware.
- */
reg = KEY_ENTRY(key->hw_key_idx);
- timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, reg,
- crypto->key,
- sizeof(crypto->key),
- timeout);
+ rt2500usb_register_multiwrite(rt2x00dev, reg,
+ crypto->key, sizeof(crypto->key));
/*
* The driver does not support the IV/EIV generation
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index eaf0a7e..0f0a4f5 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -169,11 +169,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
/*
* Write firmware to device.
*/
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT,
- FIRMWARE_IMAGE_BASE,
- data + offset, length,
- REGISTER_TIMEOUT32(length));
+ rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+ data + offset, length);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
@@ -478,10 +475,8 @@ static void rt2800usb_write_beacon(struct queue_entry *entry,
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, beacon_base,
- entry->skb->data, entry->skb->len,
- REGISTER_TIMEOUT32(entry->skb->len));
+ rt2800_register_multiwrite(rt2x00dev, beacon_base,
+ entry->skb->data, entry->skb->len);
/*
* Enable beaconing again.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 1f72c59..1cae159 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -112,26 +112,6 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
const u16 offset, void *buffer,
const u16 buffer_length, const int timeout)
{
- int status;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
- requesttype, offset, buffer,
- buffer_length, timeout);
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
-
-int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
- const u8 request, const u8 requesttype,
- const u16 offset, const void *buffer,
- const u16 buffer_length,
- const int timeout)
-{
int status = 0;
unsigned char *tb;
u16 off, len, bsize;
@@ -156,7 +136,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
return status;
}
-EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 621d0f8..255b81e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -167,25 +167,6 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
const u16 buffer_length, const int timeout);
/**
- * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
- * @rt2x00dev: Pointer to &struct rt2x00_dev
- * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
- * @requesttype: Request type &USB_VENDOR_REQUEST_*
- * @offset: Register start offset to perform action on
- * @buffer: Buffer where information will be read/written to by device
- * @buffer_length: Size of &buffer
- * @timeout: Operation timeout
- *
- * This function is used to transfer register data in blocks larger
- * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
- */
-int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
- const u8 request, const u8 requesttype,
- const u16 offset, const void *buffer,
- const u16 buffer_length,
- const int timeout);
-
-/**
* rt2x00usb_vendor_request_sw - Send single register command to device
* @rt2x00dev: Pointer to &struct rt2x00_dev
* @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index dc4a028..2f7e0ce 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -269,7 +269,6 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
{
struct hw_key_entry key_entry;
struct rt2x00_field32 field;
- int timeout;
u32 mask;
u32 reg;
@@ -305,12 +304,8 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
sizeof(key_entry.rx_mic));
reg = SHARED_KEY_ENTRY(key->hw_key_idx);
- timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, reg,
- &key_entry,
- sizeof(key_entry),
- timeout);
+ rt2x00usb_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
/*
* The cipher types are stored over 2 registers.
@@ -371,7 +366,6 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
{
struct hw_pairwise_ta_entry addr_entry;
struct hw_key_entry key_entry;
- int timeout;
u32 mask;
u32 reg;
@@ -406,17 +400,11 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
sizeof(key_entry.rx_mic));
reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
- timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, reg,
- &key_entry,
- sizeof(key_entry),
- timeout);
+ rt2x00usb_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
/*
* Send the address and cipher type to the hardware register.
- * This data fits within the CSR cache size, so we can use
- * rt2x00usb_register_multiwrite() directly.
*/
memset(&addr_entry, 0, sizeof(addr_entry));
memcpy(&addr_entry, crypto->address, ETH_ALEN);
@@ -1091,11 +1079,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev,
/*
* Write firmware to device.
*/
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT,
- FIRMWARE_IMAGE_BASE,
- data, len,
- REGISTER_TIMEOUT32(len));
+ rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len);
/*
* Send firmware request to device to load firmware,
@@ -1547,10 +1531,8 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
- rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, beacon_base,
- entry->skb->data, entry->skb->len,
- REGISTER_TIMEOUT32(entry->skb->len));
+ rt2x00usb_register_multiwrite(rt2x00dev, beacon_base,
+ entry->skb->data, entry->skb->len);
/*
* Enable beaconing again.
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
