The handling of tx descriptors for beacons can be simplified by updating
write_tx_desc implementations of each driver to write directly to the
queue entry descriptor instead of to a provided memory area.
This is also a preparation for further clean ups where descriptors are
properly reserved in the skb instead of fiddling with the skb data
pointer.
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Acked-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 21 +++++++++------------
drivers/net/wireless/rt2x00/rt2500pci.c | 21 +++++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 21 ++++++++++++---------
drivers/net/wireless/rt2x00/rt2800pci.c | 14 ++++++++++----
drivers/net/wireless/rt2x00/rt2800usb.c | 8 +++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 9 ---------
drivers/net/wireless/rt2x00/rt2x00queue.c | 10 ----------
drivers/net/wireless/rt2x00/rt2x00usb.c | 8 --------
drivers/net/wireless/rt2x00/rt61pci.c | 20 +++++++++++++-------
drivers/net/wireless/rt2x00/rt73usb.c | 21 ++++++++++++---------
10 files changed, 72 insertions(+), 81 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 1eff6ec..def3fa4 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1006,15 +1006,15 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
- __le32 *txd = skbdesc->desc;
+ __le32 *txd = entry_priv->desc;
u32 word;
/*
* Start writing the descriptor words.
*/
- rt2x00_desc_read(entry_priv->desc, 1, &word);
+ rt2x00_desc_read(txd, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
- rt2x00_desc_write(entry_priv->desc, 1, word);
+ rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, txdesc->length);
@@ -1059,6 +1059,12 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
rt2x00_desc_write(txd, 0, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
@@ -1081,15 +1087,6 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
- /*
- * Replace rt2x00lib allocated descriptor with the
- * pointer to the _real_ hardware descriptor.
- * After that, map the beacon to DMA and update the
- * descriptor.
- */
- memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
- skbdesc->desc = entry_priv->desc;
-
rt2x00queue_map_txskb(rt2x00dev, entry->skb);
rt2x00_desc_read(entry_priv->desc, 1, &word);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 8d3e95e..070c23e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1164,15 +1164,15 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
- __le32 *txd = skbdesc->desc;
+ __le32 *txd = entry_priv->desc;
u32 word;
/*
* Start writing the descriptor words.
*/
- rt2x00_desc_read(entry_priv->desc, 1, &word);
+ rt2x00_desc_read(txd, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
- rt2x00_desc_write(entry_priv->desc, 1, word);
+ rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
@@ -1216,6 +1216,12 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
@@ -1238,15 +1244,6 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
- /*
- * Replace rt2x00lib allocated descriptor with the
- * pointer to the _real_ hardware descriptor.
- * After that, map the beacon to DMA and update the
- * descriptor.
- */
- memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
- skbdesc->desc = entry_priv->desc;
-
rt2x00queue_map_txskb(rt2x00dev, entry->skb);
rt2x00_desc_read(entry_priv->desc, 1, &word);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9a915be..b985d8f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1033,7 +1033,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- __le32 *txd = skbdesc->desc;
+ __le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE);
u32 word;
/*
@@ -1075,6 +1075,12 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
_rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
_rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
}
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
@@ -1088,19 +1094,11 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
int length;
u16 reg, reg0;
/*
- * Add the descriptor in front of the skb.
- */
- skb_push(entry->skb, entry->queue->desc_size);
- memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
- skbdesc->desc = entry->skb->data;
-
- /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1109,6 +1107,11 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
/*
+ * Take the descriptor in front of the skb into account.
+ */
+ skb_push(entry->skb, TXD_DESC_SIZE);
+
+ /*
* USB devices cannot blindly pass the skb->len as the
* length of the data to usb_fill_bulk_urb. Pass the skb
* to the driver to determine what the length should be.
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 7d4778d..b2f2327 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -633,7 +633,8 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- __le32 *txd = skbdesc->desc;
+ struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
+ __le32 *txd = entry_priv->desc;
u32 word;
/*
@@ -657,15 +658,14 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
!test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
- rt2x00dev->ops->extra_tx_headroom);
+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0, TXWI_DESC_SIZE);
rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0);
rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
- skbdesc->skb_dma + rt2x00dev->ops->extra_tx_headroom);
+ skbdesc->skb_dma + TXWI_DESC_SIZE);
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 3, &word);
@@ -673,6 +673,12 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
rt2x00_desc_write(txd, 3, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index d48d705..1b87daa 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -400,7 +400,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- __le32 *txi = skbdesc->desc;
+ __le32 *txi = (__le32 *)(skb->data - TXWI_DESC_SIZE - TXINFO_DESC_SIZE);
u32 word;
/*
@@ -422,6 +422,12 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
rt2x00_desc_write(txi, 0, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txi;
+ skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 2fe9f29..ff80ef7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -66,8 +66,6 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct queue_entry_priv_pci *entry_priv = entry->priv_data;
- struct skb_frame_desc *skbdesc;
/*
* This should not happen, we already checked the entry
@@ -82,13 +80,6 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry,
return -EINVAL;
}
- /*
- * Fill in skb descriptor
- */
- skbdesc = get_skb_frame_desc(entry->skb);
- skbdesc->desc = entry_priv->desc;
- skbdesc->desc_len = entry->queue->desc_size;
-
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4a067db..c68bf32 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -555,7 +555,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf = vif_to_intf(vif);
struct skb_frame_desc *skbdesc;
struct txentry_desc txdesc;
- __le32 desc[16];
if (unlikely(!intf->beacon))
return -ENOBUFS;
@@ -588,19 +587,10 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
/*
- * For the descriptor we use a local array from where the
- * driver can move it to the correct location required for
- * the hardware.
- */
- memset(desc, 0, sizeof(desc));
-
- /*
* Fill in skb descriptor
*/
skbdesc = get_skb_frame_desc(intf->beacon->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->desc = desc;
- skbdesc->desc_len = intf->beacon->queue->desc_size;
skbdesc->entry = intf->beacon;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index acf3282..a4f0551 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -221,7 +221,6 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry,
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
- struct skb_frame_desc *skbdesc;
u32 length;
/*
@@ -231,13 +230,6 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry,
memset(entry->skb->data, 0, entry->queue->desc_size);
/*
- * Fill in skb descriptor
- */
- skbdesc = get_skb_frame_desc(entry->skb);
- skbdesc->desc = entry->skb->data;
- skbdesc->desc_len = entry->queue->desc_size;
-
- /*
* USB devices cannot blindly pass the skb->len as the
* length of the data to usb_fill_bulk_urb. Pass the skb
* to the driver to determine what the length should be.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 55aa010..1be1d7d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1763,7 +1763,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- __le32 *txd = skbdesc->desc;
+ struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
+ __le32 *txd = entry_priv->desc;
u32 word;
/*
@@ -1842,6 +1843,13 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len =
+ (txdesc->queue == QID_BEACON) ? TXINFO_SIZE : TXD_DESC_SIZE;
}
/*
@@ -1851,7 +1859,7 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
unsigned int beacon_base;
u32 reg;
@@ -1867,11 +1875,9 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
- rt2x00pci_register_multiwrite(rt2x00dev,
- beacon_base,
- skbdesc->desc, skbdesc->desc_len);
- rt2x00pci_register_multiwrite(rt2x00dev,
- beacon_base + skbdesc->desc_len,
+ rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
+ entry_priv->desc, TXINFO_SIZE);
+ rt2x00pci_register_multiwrite(rt2x00dev, beacon_base + TXINFO_SIZE,
entry->skb->data, entry->skb->len);
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index fa40d43..fca661c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1440,7 +1440,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- __le32 *txd = skbdesc->desc;
+ __le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE);
u32 word;
/*
@@ -1499,6 +1499,12 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
@@ -1508,18 +1514,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
/*
- * Add the descriptor in front of the skb.
- */
- skb_push(entry->skb, entry->queue->desc_size);
- memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
- skbdesc->desc = entry->skb->data;
-
- /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1528,6 +1526,11 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
/*
+ * Take the descriptor in front of the skb into account.
+ */
+ skb_push(entry->skb, TXD_DESC_SIZE);
+
+ /*
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
