In suspend() host sleep is activated using already configured
host sleep parameters through wol command, and in resume() host
sleep is cancelled. Earlier priv->fw_ready flag used to reset and
set in suspend and resume handler respectively. Since after suspend
only host goes into sleep state and firmware is always ready, those
changes in flag state are removed.
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Kiran Divekar <dkiran@xxxxxxxxxxx>
---
drivers/net/wireless/libertas/cmd.c | 37 ++++++++++++--
drivers/net/wireless/libertas/cmdresp.c | 30 ++---------
drivers/net/wireless/libertas/decl.h | 2 +-
drivers/net/wireless/libertas/dev.h | 6 ++
drivers/net/wireless/libertas/ethtool.c | 15 +++---
drivers/net/wireless/libertas/if_sdio.c | 58 ++++++++++++++++++++++
drivers/net/wireless/libertas/if_usb.c | 6 ++
drivers/net/wireless/libertas/main.c | 79 ++++++++++++++++++++++---------
8 files changed, 172 insertions(+), 61 deletions(-)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index cdb9b96..0fa6b0e 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -70,6 +70,8 @@ static u8 is_command_allowed_in_ps(u16 cmd)
switch (cmd) {
case CMD_802_11_RSSI:
return 1;
+ case CMD_802_11_HOST_SLEEP_CFG:
+ return 1;
default:
break;
}
@@ -185,6 +187,23 @@ out:
return ret;
}
+static int lbs_ret_host_sleep_cfg(struct lbs_private *priv, unsigned long dummy,
+ struct cmd_header *resp)
+{
+ lbs_deb_enter(LBS_DEB_CMD);
+ if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
+ priv->is_host_sleep_configured = 0;
+ if (priv->psstate == PS_STATE_FULL_POWER) {
+ priv->is_host_sleep_activated = 0;
+ wake_up_interruptible(&priv->host_sleep_q);
+ }
+ } else {
+ priv->is_host_sleep_configured = 1;
+ }
+ lbs_deb_leave(LBS_DEB_CMD);
+ return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
