According to the Ralink drivers, the RF3052 chipset
supports the 5GHz band. Update channel initialization
to add the corresponding channels for this chip.
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e7a61a3..0d6f715 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2223,7 +2223,7 @@ EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
/*
* RF value list for rt28x0
- * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850, RF2750 & RF3052)
*/
static const struct rf_channel rf_vals[] = {
{ 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
@@ -2355,11 +2355,12 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
if (rt2x00_rf(rt2x00dev, RF2820) ||
- rt2x00_rf(rt2x00dev, RF2720) ||
- rt2x00_rf(rt2x00dev, RF3052)) {
+ rt2x00_rf(rt2x00dev, RF2720)) {
spec->num_channels = 14;
spec->channels = rf_vals;
- } else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2850) ||
+ rt2x00_rf(rt2x00dev, RF2750) ||
+ rt2x00_rf(rt2x00dev, RF3052)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals);
spec->channels = rf_vals;
--
1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
