This patch and the patch by Gabor entitled "[PATCH] ssb: Implement
fast powerup delay calculation" are enough to allow the netbook from
John to work with ssb/b43. As this patch tampers with the SPROM offset for
14e4:4315 devices, it should be tested by anyone with an LP PHY that works
to ensure that it is not killed.
The essential elements of this patch will also be tested as part of kernel Bug
#15825.
Larry
Index: wireless-testing/drivers/ssb/pci.c
===================================================================
--- wireless-testing.orig/drivers/ssb/pci.c
+++ wireless-testing/drivers/ssb/pci.c
@@ -631,8 +631,17 @@ static int ssb_pci_sprom_get(struct ssb_
return -ENODEV;
}
- bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
- SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+ /* get SPROM offset: SSB_SPROM_BASE1 except for chipcommon rev >= 31
+ * or chip ID is 0x4312 and bit 0x2 is set in chipcommon status
+ */
+ if (bus->chipco.dev->id.revision >= 31)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else if (bus->chip_id == 0x4312 && (bus->chipco.status & 0x02))
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else
+ bus->sprom_offset = SSB_SPROM_BASE1;
+
+ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
Index: wireless-testing/drivers/ssb/scan.c
===================================================================
--- wireless-testing.orig/drivers/ssb/scan.c
+++ wireless-testing/drivers/ssb/scan.c
@@ -306,6 +306,11 @@ int ssb_bus_scan(struct ssb_bus *bus,
}
tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP);
bus->chipco.capabilities = tmp;
+ if (bus->chip_rev >= 11)
+ bus->chipco.status = scan_read32(bus, 0,
+ SSB_CHIPCO_CHIPSTAT);
+ else
+ bus->chipco.status = 0;
} else {
if (bus->bustype == SSB_BUSTYPE_PCI) {
bus->chip_id = pcidev_to_chipid(bus->host_pci);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
