Currently, when one interface switches HT mode,
all others will follow along. This is clearly
undesirable, since the new one might switch to
no-HT while another one is operating in HT.
Address this issue by keeping track of the HT
mode per interface, and allowing only changes
that are compatible, i.e. switching into HT40+
is not possible when another interface is in
HT40-, in that case the second one needs to
fall back to HT20.
Also, to allow drivers to know what's going on,
store the per-interface HT mode (channel type)
in the virtual interface's bss_conf.
Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/mac80211_hwsim.c | 19 ++++-----
include/net/mac80211.h | 4 +
net/mac80211/cfg.c | 23 ++++++++---
net/mac80211/chan.c | 70 ++++++++++++++++++++++++++++++++++
net/mac80211/ibss.c | 5 +-
net/mac80211/ieee80211_i.h | 5 +-
net/mac80211/main.c | 2
net/mac80211/mlme.c | 44 +++++++++++----------
8 files changed, 132 insertions(+), 40 deletions(-)
--- wireless-testing.orig/include/net/mac80211.h 2010-05-05 15:21:53.000000000 +0200
+++ wireless-testing/include/net/mac80211.h 2010-05-05 15:23:27.000000000 +0200
@@ -191,6 +191,9 @@ enum ieee80211_bss_change {
* the current band.
* @bssid: The BSSID for this BSS
* @enable_beacon: whether beaconing should be enabled or not
+ * @channel_type: Channel type for this BSS -- the hardware might be
+ * configured for HT40+ while this BSS only uses no-HT, for
+ * example.
* @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
* This field is only valid when the channel type is one of the HT types.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
@@ -215,6 +218,7 @@ struct ieee80211_bss_conf {
u16 ht_operation_mode;
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
+ enum nl80211_channel_type channel_type;
};
/**
--- wireless-testing.orig/net/mac80211/cfg.c 2010-05-05 15:21:53.000000000 +0200
+++ wireless-testing/net/mac80211/cfg.c 2010-05-05 15:23:27.000000000 +0200
@@ -1167,23 +1167,34 @@ static int ieee80211_set_channel(struct
enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata = NULL;
+
+ if (netdev)
+ sdata = IEEE80211_DEV_TO_SUB_IF(netdev);
switch (ieee80211_get_channel_mode(local, NULL)) {
case CHAN_MODE_HOPPING:
return -EBUSY;
case CHAN_MODE_FIXED:
- if (local->oper_channel == chan &&
- local->oper_channel_type == channel_type)
+ if (local->oper_channel != chan)
+ return -EBUSY;
+ if (!sdata && local->_oper_channel_type == channel_type)
return 0;
- return -EBUSY;
+ break;
case CHAN_MODE_UNDEFINED:
break;
}
local->oper_channel = chan;
- local->oper_channel_type = channel_type;
- return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ if (!ieee80211_set_channel_type(local, sdata, channel_type))
+ return -EBUSY;
+
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR)
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+
+ return 0;
}
#ifdef CONFIG_PM
@@ -1407,7 +1418,7 @@ int __ieee80211_request_smps(struct ieee
* association, there's no need to send an action frame.
*/
if (!sdata->u.mgd.associated ||
- sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) {
+ sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) {
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_smps(sdata->local, sdata);
mutex_unlock(&sdata->local->iflist_mtx);
--- wireless-testing.orig/net/mac80211/chan.c 2010-05-05 15:21:53.000000000 +0200
+++ wireless-testing/net/mac80211/chan.c 2010-05-05 15:23:27.000000000 +0200
@@ -2,6 +2,7 @@
* mac80211 - channel management
*/
+#include <linux/nl80211.h>
#include "ieee80211_i.h"
enum ieee80211_chan_mode
@@ -55,3 +56,72 @@ ieee80211_get_channel_mode(struct ieee80
return mode;
}
+
+bool ieee80211_set_channel_type(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ enum nl80211_channel_type chantype)
+{
+ struct ieee80211_sub_if_data *tmp;
+ enum nl80211_channel_type superchan = NL80211_CHAN_NO_HT;
+ bool result;
+
+ mutex_lock(&local->iflist_mtx);
+
+ list_for_each_entry(tmp, &local->interfaces, list) {
+ if (tmp == sdata)
+ continue;
+
+ if (!ieee80211_sdata_running(tmp))
+ continue;
+
+ switch (tmp->vif.bss_conf.channel_type) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
+ superchan = tmp->vif.bss_conf.channel_type;
+ break;
+ case NL80211_CHAN_HT40PLUS:
+ WARN_ON(superchan == NL80211_CHAN_HT40MINUS);
+ superchan = NL80211_CHAN_HT40PLUS;
+ break;
+ case NL80211_CHAN_HT40MINUS:
+ WARN_ON(superchan == NL80211_CHAN_HT40PLUS);
+ superchan = NL80211_CHAN_HT40MINUS;
+ break;
+ }
+ }
+
+ switch (superchan) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
+ /*
+ * allow any change that doesn't go to no-HT
+ * (if it already is no-HT no change is needed)
+ */
+ if (chantype == NL80211_CHAN_NO_HT)
+ break;
+ superchan = chantype;
+ break;
+ case NL80211_CHAN_HT40PLUS:
+ case NL80211_CHAN_HT40MINUS:
+ /* allow smaller bandwidth and same */
+ if (chantype == NL80211_CHAN_NO_HT)
+ break;
+ if (chantype == NL80211_CHAN_HT20)
+ break;
+ if (superchan == chantype)
+ break;
+ result = false;
+ goto out;
+ }
+
+ local->_oper_channel_type = superchan;
+
+ if (sdata)
+ sdata->vif.bss_conf.channel_type = chantype;
+
+ result = true;
+ out:
+ mutex_unlock(&local->iflist_mtx);
+
+ return result;
+}
--- wireless-testing.orig/net/mac80211/ibss.c 2010-05-05 15:21:54.000000000 +0200
+++ wireless-testing/net/mac80211/ibss.c 2010-05-05 15:23:27.000000000 +0200
@@ -103,7 +103,7 @@ static void __ieee80211_sta_join_ibss(st
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
local->oper_channel = chan;
- local->oper_channel_type = NL80211_CHAN_NO_HT;
+ WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sband = local->hw.wiphy->bands[chan->band];
@@ -911,7 +911,8 @@ int ieee80211_ibss_join(struct ieee80211
/* fix ourselves to that channel now already */
if (params->channel_fixed) {
sdata->local->oper_channel = params->channel;
- sdata->local->oper_channel_type = NL80211_CHAN_NO_HT;
+ WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
+ NL80211_CHAN_NO_HT));
}
if (params->ie) {
--- wireless-testing.orig/net/mac80211/ieee80211_i.h 2010-05-05 15:21:53.000000000 +0200
+++ wireless-testing/net/mac80211/ieee80211_i.h 2010-05-05 15:23:27.000000000 +0200
@@ -768,7 +768,7 @@ struct ieee80211_local {
enum mac80211_scan_state next_scan_state;
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
- enum nl80211_channel_type oper_channel_type;
+ enum nl80211_channel_type _oper_channel_type;
struct ieee80211_channel *oper_channel, *csa_channel;
/* Temporary remain-on-channel for off-channel operations */
@@ -1239,6 +1239,9 @@ enum ieee80211_chan_mode {
enum ieee80211_chan_mode
ieee80211_get_channel_mode(struct ieee80211_local *local,
struct ieee80211_sub_if_data *ignore);
+bool ieee80211_set_channel_type(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ enum nl80211_channel_type chantype);
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
--- wireless-testing.orig/net/mac80211/main.c 2010-05-05 15:21:53.000000000 +0200
+++ wireless-testing/net/mac80211/main.c 2010-05-05 15:23:27.000000000 +0200
@@ -111,7 +111,7 @@ int ieee80211_hw_config(struct ieee80211
channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
- channel_type = local->oper_channel_type;
+ channel_type = local->_oper_channel_type;
}
if (chan != local->hw.conf.channel ||
--- wireless-testing.orig/net/mac80211/mlme.c 2010-05-05 15:21:54.000000000 +0200
+++ wireless-testing/net/mac80211/mlme.c 2010-05-05 15:23:27.000000000 +0200
@@ -137,11 +137,14 @@ static u32 ieee80211_enable_ht(struct ie
struct sta_info *sta;
u32 changed = 0;
u16 ht_opmode;
- bool enable_ht = true, ht_changed;
+ bool enable_ht = true;
+ enum nl80211_channel_type prev_chantype;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+ prev_chantype = sdata->vif.bss_conf.channel_type;
+
/* HT is not supported */
if (!sband->ht_cap.ht_supported)
enable_ht = false;
@@ -172,38 +175,37 @@ static u32 ieee80211_enable_ht(struct ie
}
}
- ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
- channel_type != local->hw.conf.channel_type;
-
if (local->tmp_channel)
local->tmp_channel_type = channel_type;
- local->oper_channel_type = channel_type;
- if (ht_changed) {
- /* channel_type change automatically detected */
- ieee80211_hw_config(local, 0);
+ if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
+ /* can only fail due to HT40+/- mismatch */
+ channel_type = NL80211_CHAN_HT20;
+ WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
+ }
+ /* channel_type change automatically detected */
+ ieee80211_hw_config(local, 0);
+
+ if (prev_chantype != channel_type) {
rcu_read_lock();
sta = sta_info_get(sdata, bssid);
if (sta)
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_HT_CHANGED,
- local->oper_channel_type);
+ channel_type);
rcu_read_unlock();
- }
-
- /* disable HT */
- if (!enable_ht)
- return 0;
+ }
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
- if (!sdata->ht_opmode_valid ||
- sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+ if (sdata->ht_opmode_valid != enable_ht ||
+ sdata->vif.bss_conf.ht_operation_mode != ht_opmode ||
+ prev_chantype != channel_type) {
changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
- sdata->ht_opmode_valid = true;
+ sdata->ht_opmode_valid = enable_ht;
}
return changed;
@@ -866,7 +868,7 @@ static void ieee80211_set_disassoc(struc
ieee80211_set_wmm_default(sdata);
/* channel(_type) changes are handled by ieee80211_hw_config */
- local->oper_channel_type = NL80211_CHAN_NO_HT;
+ WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
/* on the next assoc, re-program HT parameters */
sdata->ht_opmode_valid = false;
@@ -883,8 +885,8 @@ static void ieee80211_set_disassoc(struc
ieee80211_hw_config(local, config_changed);
- /* And the BSSID changed -- not very interesting here */
- changed |= BSS_CHANGED_BSSID;
+ /* The BSSID (not really interesting) and HT changed */
+ changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
ieee80211_bss_info_change_notify(sdata, changed);
if (remove_sta)
@@ -2266,7 +2268,7 @@ int ieee80211_mgd_action(struct ieee8021
if ((chan != local->tmp_channel ||
channel_type != local->tmp_channel_type) &&
(chan != local->oper_channel ||
- channel_type != local->oper_channel_type))
+ channel_type != local->_oper_channel_type))
return -EBUSY;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + len);
--- wireless-testing.orig/drivers/net/wireless/mac80211_hwsim.c 2010-05-05 15:21:54.000000000 +0200
+++ wireless-testing/drivers/net/wireless/mac80211_hwsim.c 2010-05-05 15:24:09.000000000 +0200
@@ -652,17 +652,17 @@ static void mac80211_hwsim_beacon(unsign
add_timer(&data->beacon_timer);
}
+static const char *hwsim_chantypes[] = {
+ [NL80211_CHAN_NO_HT] = "noht",
+ [NL80211_CHAN_HT20] = "ht20",
+ [NL80211_CHAN_HT40MINUS] = "ht40-",
+ [NL80211_CHAN_HT40PLUS] = "ht40+",
+};
static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
{
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
- static const char *chantypes[4] = {
- [NL80211_CHAN_NO_HT] = "noht",
- [NL80211_CHAN_HT20] = "ht20",
- [NL80211_CHAN_HT40MINUS] = "ht40-",
- [NL80211_CHAN_HT40PLUS] = "ht40+",
- };
static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
[IEEE80211_SMPS_AUTOMATIC] = "auto",
[IEEE80211_SMPS_OFF] = "off",
@@ -673,7 +673,7 @@ static int mac80211_hwsim_config(struct
printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
wiphy_name(hw->wiphy), __func__,
conf->channel->center_freq,
- chantypes[conf->channel_type],
+ hwsim_chantypes[conf->channel_type],
!!(conf->flags & IEEE80211_CONF_IDLE),
!!(conf->flags & IEEE80211_CONF_PS),
smps_modes[conf->smps_mode]);
@@ -761,9 +761,10 @@ static void mac80211_hwsim_bss_info_chan
}
if (changed & BSS_CHANGED_HT) {
- printk(KERN_DEBUG " %s: HT: op_mode=0x%x\n",
+ printk(KERN_DEBUG " %s: HT: op_mode=0x%x, chantype=%s\n",
wiphy_name(hw->wiphy),
- info->ht_operation_mode);
+ info->ht_operation_mode,
+ hwsim_chantypes[info->channel_type]);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
