Am Montag 26 April 2010 schrieb Helmut Schaa:
> Am Sonntag 11 April 2010 schrieb Gertjan van Wingerde:
> > rt2x00 had preliminary support for RT3070 based devices, but the support was
> > incomplete.
> > Update the RT3070 register initialization to be similar to the latest Ralink
> > vendor driver.
> >
> > With this patch my rt3070 based devices start showing a sign of life.
>
> Gertjan, this patch breaks rx on my 305x SoC device. See inline comments for
> more details.
Antonio, did that patch also break rx on your PCI device with rt2872?
If not I'm going to enable this code only on SOC devices.
Thanks,
Helmut
> [...]
>
> > @@ -1643,18 +1653,12 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
> > {
> > u8 rfcsr;
> > u8 bbp;
> > + u32 reg;
> > + u16 eeprom;
> >
> > - if (rt2x00_is_usb(rt2x00dev) &&
> > - !rt2x00_rt_rev(rt2x00dev, RT3070, REV_RT3070E))
> > + if (!rt2x00_rt(rt2x00dev, RT3070))
> > return 0;
> >
> > - if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
> > - if (!rt2x00_rf(rt2x00dev, RF3020) &&
> > - !rt2x00_rf(rt2x00dev, RF3021) &&
> > - !rt2x00_rf(rt2x00dev, RF3022))
> > - return 0;
> > - }
>
> Any reason why you've removed this part? The following code was executed on
> pci and soc devices when they had an 3020, 3021 or 3022 rf.
>
> > /*
> > * Init RF calibration.
> > */
> > @@ -1665,13 +1669,13 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
> > rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
> > rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
> >
> > - if (rt2x00_is_usb(rt2x00dev)) {
> > + if (rt2x00_rt(rt2x00dev, RT3070)) {
> > rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
> > rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
> > rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
> > rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
> > rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
> > - rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
> > + rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
> > rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
> > rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
> > rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
> > @@ -1684,48 +1688,25 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
> > rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
> > rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
> > rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
> > - rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
> > rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
> > - } else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
> > - rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
> > - rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
> > - rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
> > - rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
> > - rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
> > - rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
> > - rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
> > - rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
> > - rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
> > - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
> > - rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
> > - rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
> > - rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
> > - rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
> > - rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
> > - rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
> > - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
> > - rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
> > - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
> > - rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
> > - rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
> > - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
> > - rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
> > - rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
> > - rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
> > - rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
> > - rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
> > - rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
> > - rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
> > - rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
>
> This part is actually needed for getting rx to work on the SoC devices.
>
> Should I post a patch that adds this code again and is only executed on SoC
> devices with rf3020, 3021 and 3022?
>
> Thanks,
> Helmut
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
