On 03/28/2010 12:14 PM, Nicolas de Pesloüan wrote:
> Larry Finger wrote:
>> On 03/24/2010 02:21 PM, Michael Buesch wrote:
>>> On Wednesday 24 March 2010 15:16:03 Larry Finger wrote:
>>>> I have modified ssb to supply a MAC address of 80:80:80:80:80:80,
>>>> rather than
>>> What about also setting the local-assignment bit for this temporary
>>> address?
>>>
>>>> The one remaining problem is that the interface has already been
>>>> renamed before
>>>> 60-persistent-b43-mac.rules is processed. In my case, the interface
>>>> is wlan13,
>>>> not wlan0. After I manually modified 60-..., then the new address is
>>>> applied.
>>>> I'm still working on this problem.
>>> Well, udev scripts are processed in alphabetical order. Can't you
>>> simply run
>>> the persistent mac rules before the persistent ifname rules?
>>
>> I finally figured out the problem I was having. The address attribute
>> was not
>> being changed by the "ifconfig" call that changed the hardware
>> address. The fix
>> is to create a new environment when the hardware address and lock out
>> the rule
>> generation process when that value is detected. The new code for
>> /lib/udev/rules.d/65-persistent-b43-mac-generator.rules is as follows
>> (Note:
>> These files are line-wrapped here.):
>>
>> #=======================================
>> #
>> # Rules file to assign a unique, permanent address to BCM43XX devices
>> without
>> # an SPROM.
>> #
>> # Copyright (c) 2010 by Calvin Walton <calvin.walton@xxxxxxxxx>
>> # Copyright (c) 2010 by Larry Finger <Larry.Finger@xxxxxxxxxxxx>
>>
>> # skip this code if action is not add, i.e. change or remove
>>
>> ACTION!="add", GOTO="persistent_b43_mac_generator_end"
>>
>> # Use the value of the MAC_CHANGED environment variable to see if the
>> address
>> # has already been changed.
>>
>> ENV{MAC_CHANGED}=="yes", GOTO="persistent_b43_mac_generator_end"
>>
>> # Call script to get a random address - if this device previously
>> encountered,
>> # the address will already have been changed.
>>
>> SUBSYSTEM=="net", ATTR{address}=="82:82:82:82:82:82",
>> IMPORT{program}="write_persistent_b43_mac"
>>
>> # Apply the new hardware address returned by the script
>>
>> SUBSYSTEM=="net", ATTR{address}=="82:82:82:82:82:82",
>> RUN+="/sbin/ifconfig
>> $env{INTERFACE} hw ether $env{MACADDRESS_NEW}"
>
> Why do you use ifconfig hw ether instead of ip link set address ?
>
>> LABEL="persistent_b43_mac_generator_end"
>> #=======================================
>>
>> The code for /lib/udev/write_persistent_b43_mac is as follows:
>>
>> #=======================================
>> #!/bin/bash
>>
>> # Script to Generate a random MAC address for a BCM43XX device without
>> # an SPROM.
>> #
>> # Copyright (c) 2010 by Calvin Walton <calvin.walton@xxxxxxxxx>
>> # Copyright (c) 2010 by Larry Finger <Larry.Finger@xxxxxxxxxxxx>
>>
>> # Use /dev/urandom to generate the last 5 bytes of the address.
>> # Make the first byte 2 to avoid generating a multicast address and to
>> set
>> # the locally administered address bit.
>>
>> MACADDRESS=$(/bin/dd if=/dev/urandom bs=1 count=5 2>/dev/null |
>> /usr/bin/od -tx1
>> | /usr/bin/head -1 | \
>> /usr/bin/cut -d' ' -f2- | /usr/bin/awk '{ print
>> "02:"$1":"$2":"$3":"$4":"$5 }')
>
> A suggest the following :
>
> - 6 bytes of randomness and force lower half of first byte to 2 if the
> value does not have bit #2 set.
> - sed, instead of head|cut|awk
>
> MACADDRESS=$(/bin/dd if=/dev/random bs=1 count=6 2>/dev/null |
> /usr/bin/od -tx1 |
> sed -ne '1{;s/0000000 //;s/^\(.\)[014589cd]/\12/;y/ /:/;p}'
It also needs to be even as an odd value would be a broadcast address. Using
only sed instead of head|cut|awk does have merit and the randomness is increased
by 6 bits. It will take me a while to understand the sed here. Regular
expressions are not my thing.
>> # Define the output rules file
>> RULES_FILE='/etc/udev/rules.d/60-persistent-b43-mac.rules'
>>
>> . /lib/udev/rule_generator.functions
>>
>> # Prevent concurrent processes from modifying the file at the same time.
>> lock_rules_file
>>
>> # Check if the rules file is writeable.
>> choose_rules_file
>>
>> # The rule should apply for all wlan devices -s some other wireless
>> driver might
>> # be loaded first - change wlanNN to wlan*
>> GEN_PATH=$(echo $DEVPATH | /usr/bin/sed s/wlan[0-9]*/wlan*/)
>
> sed should be quoted here : /usr/bin/sed -e 's/wlan[0-9]*/wlan*/'
> Else, it might be fun if you happen to have a file called s/wlan7/wlan15
> in current directory.
OK - I see your point. As the current directory is /lib/udev, the presence of
such a file is unlikely, but better to protect against the problem.
>> # Output new rule
>> echo "SUBSYSTEM==\"net\", DEVPATH==\"$GEN_PATH\",
>> ATTR{address}==\"82:82:82:82:82:82\", ENV{MAC_CHANGED}=\"yes\",
>> RUN+=\"/sbin/ifconfig \$env{INTERFACE} hw ether $MACADDRESS\"" >>
>> $RULES_FILE
>
> If DEVPATH is "generic" (wlan*), how would you distinguish between two
> broadcom NIC present in the system, both without an SPROM ?
That is covered by the /devices/pci0000:00/0000:00:0d.0/0000:04:00.0/... part of
DEVPATH. A second device on the same bridge would have ...04:01.0... and a
device on a different bridge would change some other part of the string. The
change to wlan* handles the case where the BCM43XX device is discovered first
with some configuration, and second when another device is plugged in at
discovery time.
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
