Add support for the set_cqm_config op. This op function configures the
requested connection quality monitor rssi threshold and rssi hysteresis
values to the hardware if the hardware supports
IEEE80211_HW_SUPPORTS_CQM.
For unsupporting hardware, currently -EOPNOTSUPP is returned, so the mac80211
is currently not doing connection quality monitoring on the host. This could be
added later, if needed.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Reviewed-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
include/net/mac80211.h | 29 +++++++++++++++++++++++++++++
net/mac80211/cfg.c | 27 +++++++++++++++++++++++++++
net/mac80211/mlme.c | 15 +++++++++++++++
3 files changed, 71 insertions(+), 0 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 936bc41..40e23f3 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -144,6 +144,7 @@ struct ieee80211_low_level_stats {
* new beacon (beaconing modes)
* @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
* enabled/disabled (beaconing modes)
+ * @BSS_CHANGED_CQM: Connection quality monitor config changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -156,6 +157,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_BSSID = 1<<7,
BSS_CHANGED_BEACON = 1<<8,
BSS_CHANGED_BEACON_ENABLED = 1<<9,
+ BSS_CHANGED_CQM = 1<<10,
};
/**
@@ -185,6 +187,9 @@ enum ieee80211_bss_change {
* @enable_beacon: whether beaconing should be enabled or not
* @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
* This field is only valid when the channel type is one of the HT types.
+ * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
+ * implies disabled
+ * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -202,6 +207,8 @@ struct ieee80211_bss_conf {
u64 timestamp;
u32 basic_rates;
u16 ht_operation_mode;
+ s32 cqm_rssi_thold;
+ u32 cqm_rssi_hyst;
};
/**
@@ -954,6 +961,11 @@ enum ieee80211_tkip_key_type {
* Hardware can provide ack status reports of Tx frames to
* the stack.
*
+ * @IEEE80211_HW_SUPPORTS_CQM_RSSI:
+ * Hardware can do connection quality monitoring - i.e. it can monitor
+ * connection quality related parameters, such as the RSSI level and
+ * provide notifications if configured trigger levels are reached.
+ *
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -975,6 +987,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
+ IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<19,
};
/**
@@ -2370,6 +2383,22 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
*/
void ieee80211_beacon_loss(struct ieee80211_vif *vif);
+/**
+ * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
+ * rssi threshold triggered
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @rssi_event: the RSSI trigger event type
+ * @gfp: context flags
+ *
+ * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * monitoring is configured with an rssi threshold, the driver will inform
+ * whenever the rssi level reaches the threshold.
+ */
+void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+ enum nl80211_cqm_rssi_threshold_event rssi_event,
+ gfp_t gfp);
+
/* Rate control API */
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b7116ef..c8f5205 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1402,6 +1402,32 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
return 0;
}
+static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
+ struct net_device *dev,
+ s32 rssi_thold, u32 rssi_hyst)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_vif *vif = &sdata->vif;
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI))
+ return -EOPNOTSUPP;
+
+ if (rssi_thold == bss_conf->cqm_rssi_thold &&
+ rssi_hyst == bss_conf->cqm_rssi_hyst)
+ return 0;
+
+ bss_conf->cqm_rssi_thold = rssi_thold;
+ bss_conf->cqm_rssi_hyst = rssi_hyst;
+
+ /* tell the driver upon association, unless already associated */
+ if (sdata->u.mgd.associated)
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
+
+ return 0;
+}
+
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr,
@@ -1506,4 +1532,5 @@ struct cfg80211_ops mac80211_config_ops = {
.remain_on_channel = ieee80211_remain_on_channel,
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
.action = ieee80211_action,
+ .set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
};
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index be5f723..5927077 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -753,6 +753,11 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
/* And the BSSID changed - we're associated now */
bss_info_changed |= BSS_CHANGED_BSSID;
+ /* Tell the driver to monitor connection quality (if supported) */
+ if ((local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI) &&
+ sdata->vif.bss_conf.cqm_rssi_thold)
+ bss_info_changed |= BSS_CHANGED_CQM;
+
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
mutex_lock(&local->iflist_mtx);
@@ -2135,3 +2140,13 @@ int ieee80211_mgd_action(struct ieee80211_sub_if_data *sdata,
*cookie = (unsigned long) skb;
return 0;
}
+
+void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+ enum nl80211_cqm_rssi_threshold_event rssi_event,
+ gfp_t gfp)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
+}
+EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
