Search Linux Wireless

Problems with Netgear WG511v1 PCMCIA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am attempting to resurrect my old Toshiba Portege 3110CT laptop
Installed Slackware 12.2 on it and all is working well except for my
WG511v1.
Last time I used it several years ago, I remember it working fine.

I believe I have everything configured in the wireless startup scripts, it
all seems to run (as shown below), although I have to manually enter
ifconfig wlan0 up before it shows up
It appears to me that the card is working except for the fact that it shows
no Single Strength (even though it is sitting within 10 ft of my wireless
AP)
Iwlist wlan0 scan returns with
wlan0    no scan results

I have reached my knowledge limit and if anyone has a suggestion to try I
would appreciate it.  I am really hoping I can use this card since money is
tight right now

iwconfig wlan0
wlan0     IEEE 802.11bg  ESSID:"tew639"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:32B2-5821-0A   Security mode:open
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Extract from /var/log/messages after card pulled and inserted.
Mar 21 21:29:00 PopsLT kernel: pccard: CardBus card inserted into slot 0
Mar 21 21:29:00 PopsLT kernel: pci 0000:01:00.0: PME# supported from D0 D1
D2 D3hot D3cold
Mar 21 21:29:00 PopsLT kernel: pci 0000:01:00.0: PME# disabled
Mar 21 21:29:00 PopsLT kernel: prism54pci 0000:01:00.0: enabling device
(0000 -> 0002)
Mar 21 21:29:00 PopsLT kernel: firmware: requesting isl3886
Mar 21 21:29:00 PopsLT kernel: p54: LM86 firmware
Mar 21 21:29:00 PopsLT kernel: p54: FW rev 2.13.1.0 - Softmac protocol 5.5
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x1
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x3
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x1905
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x1007
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x1008
Mar 21 21:29:01 PopsLT kernel: p54: unknown eeprom code : 0x1100
Mar 21 21:29:01 PopsLT kernel: phy1: hwaddr 00:09:5b:45:40:05, isl3890
Mar 21 21:29:01 PopsLT kernel: firmware: requesting isl3886
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
mode Managed
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
nick PopsLT
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
channel auto
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0 key
************
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0 key
restricted
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
rate 54M auto
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
essid "tew639"
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/iwconfig wlan0
essid "tew639"
Mar 21 21:29:05 PopsLT logger: /etc/rc.d/rc.inet1:  /sbin/dhcpcd -d -t 30
wlan0
Mar 21 21:29:05 PopsLT dhcpcd[2940]: MAC address = 00:09:5b:45:40:05

Thanks
Steven Wheeler

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux