From: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
Monitors the tx statistics to detect the drop in throughput.
When the throughput drops, the ratio of the actual_ack_count and the
expected_ack_count also drops. At the same time, the aggregated
ba_timeout (the number of ba timeout retries) also rises. If the
actual_ack_count/expected_ack_count ratio is 0 and the number of ba
timeout retries rises to BA_TIMEOUT_MAX, no tx packets can be delivered.
Reloading the uCode and bring the system back to normal operational
state.
Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@xxxxxxxxx>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 14 ++++++++-
drivers/net/wireless/iwlwifi/iwl-dev.h | 5 +++
drivers/net/wireless/iwlwifi/iwl-rx.c | 50 +++++++++++++++++++++++++++++++-
3 files changed, 67 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 82b1a3f..e69e625 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2916,10 +2916,21 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
return ret;
case IEEE80211_AMPDU_TX_START:
IWL_DEBUG_HT(priv, "start Tx\n");
- return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
+ ret = iwl_tx_agg_start(priv, sta->addr, tid, ssn);
+ if (ret == 0) {
+ priv->_agn.agg_tids_count++;
+ IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
+ priv->_agn.agg_tids_count);
+ }
+ return ret;
case IEEE80211_AMPDU_TX_STOP:
IWL_DEBUG_HT(priv, "stop Tx\n");
ret = iwl_tx_agg_stop(priv, sta->addr, tid);
+ if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
+ priv->_agn.agg_tids_count--;
+ IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
+ priv->_agn.agg_tids_count);
+ }
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return 0;
else
@@ -3303,6 +3314,7 @@ static int iwl_init_drv(struct iwl_priv *priv)
priv->iw_mode = NL80211_IFTYPE_STATION;
priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
+ priv->_agn.agg_tids_count = 0;
/* initialize force reset */
priv->force_reset[IWL_RF_RESET].reset_duration =
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index bb4cba5..e847e61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1300,6 +1300,11 @@ struct iwl_priv {
int ict_index;
u32 inta;
bool use_ict;
+ /*
+ * reporting the number of tids has AGG on. 0 means
+ * no AGGREGATION
+ */
+ u8 agg_tids_count;
} _agn;
#endif
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index d368b8d..7aef285 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -616,9 +616,18 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
#define REG_RECALIB_PERIOD (60)
+/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
+#define ACK_CNT_RATIO (50)
+#define BA_TIMEOUT_CNT (5)
+#define BA_TIMEOUT_MAX (16)
+
#define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
/*
- * This function checks for plcp error.
+ * This function checks for plcp error, ACK count ratios, aggregated BA
+ * timeout retries.
+ * - When the ACK count ratio is 0 and aggregated BA timeout retries is
+ * exceeding the BA_TIMEOUT_MAX, it will recover the failure by resetting
+ * the firmware.
* - When the plcp error is exceeding the thresholds, it will reset the radio
* to improve the throughput.
*/
@@ -628,6 +637,45 @@ void iwl_recover_from_statistics(struct iwl_priv *priv,
int combined_plcp_delta;
unsigned int plcp_msec;
unsigned long plcp_received_jiffies;
+ int actual_ack_cnt_delta;
+ int expected_ack_cnt_delta;
+ int ba_timeout_delta;
+
+ actual_ack_cnt_delta =
+ le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
+ le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
+ expected_ack_cnt_delta =
+ le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
+ le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
+ ba_timeout_delta =
+ le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
+ le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
+ if ((priv->_agn.agg_tids_count > 0) &&
+ (expected_ack_cnt_delta > 0) &&
+ (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
+ < ACK_CNT_RATIO) &&
+ (ba_timeout_delta > BA_TIMEOUT_CNT)) {
+ IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
+ " expected_ack_cnt = %d\n",
+ actual_ack_cnt_delta, expected_ack_cnt_delta);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
+ priv->delta_statistics.tx.rx_detected_cnt);
+ IWL_DEBUG_RADIO(priv,
+ "ack_or_ba_timeout_collision delta = %d\n",
+ priv->delta_statistics.tx.
+ ack_or_ba_timeout_collision);
+#endif
+ IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
+ ba_timeout_delta);
+ if ((actual_ack_cnt_delta == 0) &&
+ (ba_timeout_delta >= BA_TIMEOUT_MAX)) {
+ IWL_DEBUG_RADIO(priv,
+ "call iwl_force_reset(IWL_FW_RESET)\n");
+ iwl_force_reset(priv, IWL_FW_RESET);
+ }
+ }
/*
* check for plcp_err and trigger radio reset if it exceeds
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
