Add support for the set_cqm_config op. This op function configures the
requested connection quality monitor rssi threshold and rssi hysteresis
values to the hardware if the hardware supports
IEEE80211_HW_SUPPORTS_CQM.
For unsupporting hardware, currently -EOPNOTSUPP is returned, so the mac80211
is currently not doing connection quality monitoring on the host. This could be
added later, if needed.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
---
include/net/mac80211.h | 26 ++++++++++++++++++++++++++
net/mac80211/cfg.c | 26 ++++++++++++++++++++++++++
net/mac80211/mlme.c | 9 +++++++++
3 files changed, 61 insertions(+), 0 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 936bc41..391c063 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -599,6 +599,7 @@ enum ieee80211_conf_flags {
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
* @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
* @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
+ * @IEEE80211_CONF_CHANGE_CQM: Connection quality monitor config changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_SMPS = BIT(1),
@@ -609,6 +610,7 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
IEEE80211_CONF_CHANGE_IDLE = BIT(8),
+ IEEE80211_CONF_CHANGE_CQM = BIT(9),
};
/**
@@ -662,6 +664,9 @@ enum ieee80211_smps_mode {
* frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
* number of transmissions not the number of retries
*
+ * @cqm_rssi_thold: Connection quality monitor RSSI threshold
+ * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ *
* @smps_mode: spatial multiplexing powersave mode; note that
* %IEEE80211_SMPS_STATIC is used when the device is not
* configured for an HT channel
@@ -676,6 +681,9 @@ struct ieee80211_conf {
u8 long_frame_max_tx_count, short_frame_max_tx_count;
+ s8 cqm_rssi_thold;
+ u8 cqm_rssi_hyst;
+
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
enum ieee80211_smps_mode smps_mode;
@@ -954,6 +962,10 @@ enum ieee80211_tkip_key_type {
* Hardware can provide ack status reports of Tx frames to
* the stack.
*
+ * @IEEE80211_HW_SUPPORTS_CQM:
+ * Hardware can do connection quality monitoring - i.e. it can monitor
+ * RSSI levels and notify on changes based on a threshold and hysteresis.
+ *
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -975,6 +987,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
+ IEEE80211_HW_SUPPORTS_CQM = 1<<19,
};
/**
@@ -2370,6 +2383,19 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
*/
void ieee80211_beacon_loss(struct ieee80211_vif *vif);
+/**
+ * ieee80211_cqm_notify - inform cqm RSSI threshold triggered
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @rssi_level: the current level of the RSSI value
+ *
+ * When the IEEE80211_HW_SUPPORTS_CQM is set, and a RSSI threshold has been
+ * configured, the driver will inform whenever RSSI goes above or below
+ * the threshold with this function.
+ */
+void ieee80211_cqm_notify(struct ieee80211_vif *vif,
+ enum nl80211_cqm_level rssi_level);
+
/* Rate control API */
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b7116ef..fbd39ee 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1402,6 +1402,31 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
return 0;
}
+static int ieee80211_set_cqm_config(struct wiphy *wiphy,
+ struct net_device *dev,
+ s8 rssi_thold, u8 rssi_hyst)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
+
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM))
+ return -EOPNOTSUPP;
+
+ if (rssi_thold == conf->cqm_rssi_thold &&
+ rssi_hyst == conf->cqm_rssi_hyst)
+ return 0;
+
+ conf->cqm_rssi_thold = rssi_thold;
+ conf->cqm_rssi_hyst = rssi_hyst;
+
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CQM);
+ return 0;
+}
+
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr,
@@ -1506,4 +1531,5 @@ struct cfg80211_ops mac80211_config_ops = {
.remain_on_channel = ieee80211_remain_on_channel,
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
.action = ieee80211_action,
+ .set_cqm_config = ieee80211_set_cqm_config
};
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index be5f723..baff89d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2135,3 +2135,12 @@ int ieee80211_mgd_action(struct ieee80211_sub_if_data *sdata,
*cookie = (unsigned long) skb;
return 0;
}
+
+void ieee80211_cqm_notify(struct ieee80211_vif *vif,
+ enum nl80211_cqm_level rssi_level)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ cfg80211_cqm_notify(sdata->dev, rssi_level, GFP_KERNEL);
+}
+EXPORT_SYMBOL(ieee80211_cqm_notify);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
